PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill Instruction Manual

1. හැඳින්වීම

This manual provides essential information for the safe and effective use of your PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill. Please read these instructions carefully before use and retain them for future reference.

1.1 නිෂ්පාදනය අවසන්view

The PROLINE CM86 series carbide tipped rotary masonry drills are engineered for drilling into coarse materials that produce a powder or gravel-like debris. These drills are suitable for use with standard rotary power tools and are optimized for light to medium hard building materials.

1.2 ප්රධාන ලක්ෂණ

• Carbide Tipped: For enhanced durability and cutting performance.
• Deep Flute: Design for efficient debris removal.
• German Made: Craftsmanship ensuring quality.
• දිගු දිග: For deeper drilling applications.
• බහුකාර්ය: Compatible with standard rotary power tools.

Image: A single PROLINE CM86-5/16 carbide tipped rotary masonry drill bit, showcasing its deep flute design and carbide tip.

2 ආරක්ෂිත තොරතුරු

Always prioritize safety when using power tools and drill bits. Failure to follow safety guidelines can result in serious injury.

• අක්ෂි ආරක්ෂණ පළඳින්න: පියාඹන සුන්බුන් වලින් ආරක්ෂා වීමට සෑම විටම ආරක්ෂිත කණ්නාඩි හෝ ඇස් කණ්ණාඩි පළඳින්න.
• ශ්‍රවණ ආරක්ෂණය පළඳින්න: Use ear protection, especially during prolonged drilling operations.
• අත්වැසුම් පළඳින්න: Protect hands from sharp edges and vibrations.
• ආරක්ෂිත වැඩ කොටස: Ensure the material being drilled is firmly clamped or secured to prevent movement.
• නිවැරදි වේගය භාවිතා කරන්න: Operate your rotary power tool at the appropriate speed for the material and drill bit size.
• අධික උනුසුම් වීමෙන් වළකින්න: Allow the drill bit to cool periodically, especially during continuous use, to prevent damage to the bit and workpiece.
• බිට් පරීක්ෂා කරන්න: Before each use, inspect the drill bit for any signs of damage, wear, or dullness. Do not use damaged bits.
• බලය විසන්ධි කරන්න: Always disconnect the power tool from its power source before changing drill bits or performing maintenance.
• වැඩ කරන ප්‍රදේශය පැහැදිලිව තබා ගන්න: ඔබේ සේවා ප්‍රදේශය හොඳින් ආලෝකමත් වී ඇති බවත් බාධාවන්ගෙන් තොර බවත් සහතික කර ගන්න.

3. පිහිටුවීම

3.1 Installing the Drill Bit

1. බල මෙවලම ක්‍රියා විරහිත කර ඇති බවට වග බලා ගන්න: Verify that your rotary power tool is unplugged or its battery is removed.
2. චක් විවෘත කරන්න: Rotate the chuck counter-clockwise to open the jaws wide enough to accept the drill bit shank.
3. බිට් ඇතුළු කරන්න: Insert the shank of the PROLINE CM86-5/16 drill bit into the chuck. Ensure it is inserted as far as possible without the flutes touching the chuck jaws.
4. චක් තද කරන්න: Rotate the chuck clockwise to securely tighten the jaws around the drill bit shank. For chucks requiring a key, use the key to ensure maximum tightness. A loose bit can be dangerous and cause inaccurate drilling.
5. ආරක්ෂාව සත්‍යාපනය කරන්න: Gently pull on the drill bit to confirm it is firmly seated and will not slip during operation.

4. මෙහෙයුම් උපදෙස්

4.1 Drilling Masonry Materials

1. Select Appropriate Speed: For masonry drilling, generally use a slower speed setting on your rotary power tool. Consult your power tool's manual for specific recommendations.
2. කැණීම් ස්ථානය සලකුණු කරන්න: ඔබ සිදුරු කිරීමට අදහස් කරන ස්ථානය පැහැදිලිව සලකුණු කරන්න.
3. සෙමින් ආරම්භ කරන්න: Begin drilling at a slow speed with light pressure to create a pilot indentation and prevent the bit from wandering.
4. ස්ථාවර පීඩනය යොදන්න: Once the bit has engaged the material, increase the speed and apply steady, firm pressure. Avoid excessive force, which can overheat the bit or damage the power tool.
5. පිරිසිදු සුන්බුන්: Periodically withdraw the drill bit from the hole to allow debris to clear from the flutes. This is especially important for deep holes.
6. සෘජු කෝණය පවත්වා ගන්න: සෘජු සිදුරක් සහතික කිරීම සඳහා සරඹ බිට් එක මතුපිටට ලම්බකව තබා ගන්න.
7. සිසිලනය: For prolonged drilling, especially in hard materials, allow the bit to cool down to prevent premature wear.
8. කැණීම් අවසන් කරන්න: Once the desired depth is reached, slowly withdraw the drill bit from the hole while the drill is still rotating.

4.2 නිර්දේශිත ද්‍රව්‍ය

This drill bit is designed for optimal performance in:

• Light to medium hard building materials
• Materials that produce coarse powder or gravel when drilled

Caution: Not recommended for use in materials requiring hammer drill action unless specifically designed for such use by the power tool manufacturer.

5. නඩත්තු කිරීම හා ගබඩා කිරීම

5.1 පිරිසිදු කිරීම

After each use, clean the drill bit to remove any dust, debris, or residue. A stiff brush or compressed air can be used. Ensure the bit is dry before storage.

5.2 පරීක්ෂා කිරීම

Regularly inspect the carbide tip for chipping or excessive wear. Check the flutes for any obstructions or damage. A dull or damaged bit should be replaced to ensure safety and efficiency.

5.3 ගබඩා කිරීම

Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips and prevent accidental injury. Store out of reach of children.

6. දෝශ නිරාකරණය

7. පිරිවිතර

8. වගකීම් සහ සහාය

For information regarding warranty coverage or technical support for your PROLINE CM86-5/16 drill bits, please refer to the manufacturer's official website or contact Champion Cutting Tool Corp. directly. Keep your purchase receipt as proof of purchase.

නිෂ්පාදකයා: Champion Cutting Tool Corp.