අත්පොත්+

Connects2 CT20VX04

Connects2 CT20VX04 Harness Adapter Instruction Manual

Vehicle-Specific Cable Assembly for Vauxhall Astra H, Corsa C, Vectra C

1. හැඳින්වීම

This instruction manual provides comprehensive guidance for the safe and correct installation of the Connects2 CT20VX04 Harness Adapter. This adapter is designed to facilitate the installation of an aftermarket car stereo into specific Vauxhall vehicles, ensuring proper power, speaker, and antenna connections, including phantom power for the original Fakra antenna system.

2 ආරක්ෂිත තොරතුරු

  • කෙටි පරිපථ සහ විදුලි හානි වැළැක්වීම සඳහා ඕනෑම විදුලි ස්ථාපනයක් ආරම්භ කිරීමට පෙර සෑම විටම වාහනයේ සෘණ බැටරි පර්යන්තය විසන්ධි කරන්න.
  • Ensure all connections are secure and properly insulated to avoid electrical shorts.
  • ස්ථාපන ක්‍රියාවලියේ කිසියම් කොටසක් පිළිබඳව ඔබට සැකයක් ඇත්නම්, සුදුසුකම් ලත් මෝටර් රථ විදුලි කාර්මිකයෙකුගෙන් විමසන්න.
  • Do not modify the harness adapter. Unauthorized modifications can lead to malfunction or damage.
  • නිෂ්පාදිතය තෙතමනය හා අධික උෂ්ණත්වයෙන් ඈත් කරන්න.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය සමඟ ඉදිරියට යාමට පෙර සියලුම සංරචක පවතින බව කරුණාකර තහවුරු කරගන්න:

  • Connects2 CT20VX04 Harness Adapter (Main Unit)
  • Fakra Antenna Adapter with Phantom Power Supply
  • Vehicle-Specific ISO Connector
Connects2 CT20VX04 Harness Adapter showing the main wiring loom with ISO and Fakra connectors.

රූපය 1: The Connects2 CT20VX04 Harness Adapter. This image displays the primary wiring loom, including the vehicle-specific ISO connector for power and speakers, and the Fakra antenna adapter with its integrated phantom power supply.

4. ගැළපුම

The Connects2 CT20VX04 Harness Adapter is compatible with the following Vauxhall vehicle models from 2004 onwards:

  • Vauxhall Astra H (2004 onwards)
  • Vauxhall Corsa C (2004 onwards)
  • Vauxhall Vectra C (2004 onwards)
  • Vauxhall Tigra (2004 onwards)

සටහන: Vehicle compatibility may vary based on specific trim levels or factory-fitted options. Always verify the existing wiring harness in your vehicle matches the adapter's connectors before installation.

5. පිහිටුවීම සහ ස්ථාපනය

Follow these steps carefully to install the harness adapter:

  1. වාහනය සූදානම් කරන්න: Ensure the vehicle's ignition is off. Disconnect the negative terminal of the car battery to prevent electrical shorts during installation.
  2. Remove Existing Head Unit: Carefully remove the factory-fitted car stereo from the dashboard. Refer to your vehicle's service manual for specific removal instructions.
  3. Connect Power/Speaker Harness: Locate the vehicle's factory wiring harness. Connect the vehicle-specific ISO connector from the CT20VX04 adapter to the corresponding connector in your vehicle. Ensure a firm and secure connection.
  4. ඇන්ටෙනා ඇඩැප්ටරය සම්බන්ධ කරන්න: Locate the vehicle's Fakra antenna connector. Connect the Fakra antenna adapter from the CT20VX04 to the vehicle's antenna cable. The adapter includes a phantom power supply, which is essential for active (amplified) factory antennas to function correctly with an aftermarket head unit.
  5. අලෙවියෙන් පසු ප්‍රධාන ඒකකයට සම්බන්ධ වන්න: Connect the ISO and DIN antenna connectors from the CT20VX04 adapter to the corresponding ports on your new aftermarket car stereo.
  6. පරීක්ෂණ සම්බන්ධතා: Before fully reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the new head unit's functionality, including power, audio output from all speakers, and radio reception.
  7. ආරක්ෂිතව සහ නැවත එකලස් කරන්න: Once all functions are verified, disconnect the battery again. Secure all wiring to prevent rattles or damage. Carefully reinstall the aftermarket head unit and reassemble the dashboard components. Reconnect the battery.

6. මෙහෙයුම් උපදෙස්

The Connects2 CT20VX04 Harness Adapter is a passive component designed to facilitate the connection of an aftermarket head unit. Once correctly installed, its operation is integrated with the functionality of your new car stereo. Refer to your aftermarket head unit's instruction manual for specific operating procedures.

7. නඩත්තු කිරීම

The CT20VX04 Harness Adapter requires minimal maintenance. Periodically, if you experience issues, you may:

  • Check all connections for tightness and corrosion.
  • Ensure wiring is not pinched or damaged.

No user-serviceable parts are contained within the adapter. Do not attempt to open or repair the unit.

8. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
No power to aftermarket head unit.
  • ලිහිල් බල සම්බන්ධතාවය.
  • Blown fuse in vehicle or head unit.
  • වැරදි රැහැන් ඇදීම.
  • Check all power connections on the harness and to the head unit.
  • Inspect vehicle and head unit fuses; replace if necessary.
  • Verify wiring against vehicle and head unit diagrams.
ස්පීකර් වලින් ශබ්දයක් නැත.
  • ලිහිල් ස්පීකර් සම්බන්ධතා.
  • Incorrect speaker wiring.
  • Head unit settings.
  • Check all speaker connections on the harness and to the head unit.
  • Ensure correct polarity and connections.
  • Verify fader/balance settings on the head unit.
දුර්වල හෝ ගුවන් විදුලි පිළිගැනීමක් නැත.
  • Antenna adapter not connected.
  • Phantom power not supplied to active antenna.
  • Damaged antenna cable.
  • Ensure the Fakra antenna adapter is securely connected.
  • Verify the phantom power wire (usually blue) from the adapter is connected to the head unit's antenna remote output.
  • Inspect the vehicle's antenna cable for damage.

9. පිරිවිතර

ආදර්ශ අංකයCT20VX04
වෙළඳ නාමයසම්බන්ධ කරයි 2
ගැළපුමVauxhall Astra H, Corsa C, Vectra C, Tigra (2004 onwards)
සම්බන්ධක වර්ගයVehicle-specific ISO, Fakra Antenna, DIN Antenna
ද්රව්යඇක්‍රිලෝනයිට්‍රයිල් බියුඩඩීන් ස්ටයිරීන් (ABS)
අයිතමයේ බරඅවුන්ස 3.88 (ග්‍රෑම් 110)
පැකේජ මානයන්අඟල් 11.81 x 5.39 x 2.01

10. වගකීම් සහ සහාය

Connects2 products are designed for reliability and performance. For warranty information or technical support, please refer to the official Connects2 webවෙබ් අඩවියට හෝ ඔබේ බලයලත් අලෙවිකරු අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.