American DJ H2O DMX Pro LED Lighting User Manual

1. හැඳින්වීම

The ADJ H2O DMX Pro is an advanced LED lighting fixture designed to create a simulated water flowing effect. This unit features DMX-512 control, a powerful 50W LED source, and offers versatile applications for various environments such as nightclubs, bars, restaurants, and special events. Its low heat output and efficient power consumption allow for extended operation.

2 ආරක්ෂිත තොරතුරු

Always observe the following safety precautions to ensure safe operation and prevent damage to the unit:

• Ensure the unit is connected to a grounded power source.
• ඒකකය වැසි හෝ තෙතමනය නිරාවරණය නොකරන්න.
• ආලෝක ප්‍රභවයට සෘජු ඇසට නිරාවරණය වීමෙන් වළකින්න.
• Disconnect from power before performing any maintenance or cleaning.
• ඒකකය වටා නිසි වාතාශ්‍රය සහතික කරන්න. වාතාශ්‍රය විවරයන් අවහිර නොකරන්න.
• Only qualified personnel should perform service or repairs.
• නිශ්චිත වෙළුම පමණක් භාවිතා කරන්නtage range (AC 120-240V 50/60Hz).

3 ප්රධාන ලක්ෂණ

The H2O DMX Pro offers a range of features for dynamic lighting effects:

• Bright 50W LED source for simulated water flowing effects.
• Designed for projection on walls, ceilings, or floors, with or without fog.
• 3 DMX Channels: Dimming, Glass Wheel, and Colors.
• Two operational modes: DMX and Master/Slave.
• Digital DMX Display with 4-button menu for easy navigation.
• Equipped with two glass effect wheels and one independent dichroic color wheel.
• Six dichroic colors: Orange, Green, Blue, Yellow, Purple, and White.
• 0-100% Dimming via DMX.
• Manual focusing lens.
• Interchangeable beam angles: 34 or 52 degrees (includes 2 replaceable lenses).
• IEC In & Out for daisy-chaining power (connect up to 5 units).
• 1/4-inch input for optional UC3 remote control (sold separately).
• Fan cooled for continuous operation without duty cycle.
• High-tech plastic molded ends for protection during transport.

4. පිහිටුවීම

4.1 ඇසිරීම

Carefully unpack the unit and check for any damage during shipping. Ensure all components are present, including the H2O DMX Pro unit, hanging bracket, and two interchangeable lenses.

4.2 සවි කිරීම

The unit includes a hanging bracket for secure mounting. Ensure the mounting surface can support the weight of the fixture. Always use a safety cable when suspending the unit overhead.

රූපය 4.1: ඉදිරිපස කෝණය view of the H2O DMX Pro with its integrated hanging bracket.

Figure 4.2: Another angle view of the H2O DMX Pro, showing the lens and ventilation.

4.3 බල සම්බන්ධතාවය

Connect the unit to a compatible power outlet using the IEC power input. For daisy-chaining multiple units, use the IEC In and Out ports. Up to 5 H2O DMX Pro units can be daisy-chained together.

Figure 4.3: Rear panel of the H2O DMX Pro, illustrating the IEC power input/output, DMX input/output, and 1/4" remote control input.

4.4 කාච ස්ථාපනය

The H2O DMX Pro comes with two interchangeable lenses (34-degree and 52-degree) to adjust the beam angle. Select the appropriate lens for your desired projection width and carefully install it onto the front of the unit.

5. මෙහෙයුම් උපදෙස්

5.1 පාලන පැනලය සහ සංදර්ශකය

The unit features a digital DMX display and a 4-button menu system for easy navigation and setting adjustments. Refer to the display for current mode, DMX address, and other parameters.

5.2 මෙහෙයුම් මාදිලි

The H2O DMX Pro supports two primary operational modes:

• DMX මාදිලිය: Allows full control over dimming, glass wheel rotation, and color selection via a DMX-512 controller. The unit utilizes 3 DMX channels.
• ප්‍රධාන/වහල් ප්‍රකාරය: Connect multiple H2O DMX Pro units via DMX cables. Set one unit as the Master, and the others as Slaves. The Slave units will mirror the Master's settings and effects.

5.3 DMX Control

To operate the unit via DMX, connect a DMX controller to the DMX Input. Set the DMX address on the unit using the digital display. The 3 DMX channels control:

1. නාලිකාව 1: Dimming (0-100%)
2. නාලිකාව 2: Glass Wheel (rotation speed and direction)
3. නාලිකාව 3: Colors (selection of 6 dichroic colors)

5.4 Manual Focusing

Adjust the manual focusing lens on the front of the unit to achieve a sharp and clear projection of the water effect on your desired surface.

5.5 Effect Examples

රූපය 5.1: උදාample of the H2O DMX Pro projecting an orange simulated water effect.

රූපය 5.2: උදාample of the H2O DMX Pro projecting a purple simulated water effect.

6. නඩත්තු කිරීම

Regular maintenance ensures the longevity and optimal performance of your H2O DMX Pro.

6.1 පිරිසිදු කිරීම

Periodically clean the exterior of the unit with a soft, dry cloth. For the lens and glass effect wheels, use a lint-free cloth and a mild glass cleaner. Ensure the unit is powered off and disconnected before cleaning.

6.2 Fan and Ventilation

Ensure the cooling fan and ventilation openings are free from dust and debris. Blocked vents can lead to overheating and reduced performance.

6.3 LED Source

The 50W LED source has a long life rating of 30,000 hours and typically does not require replacement under normal operating conditions.

7. දෝශ නිරාකරණය

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official ADJ webවෙබ් අඩවියට හෝ ඔබේ බලයලත් අලෙවිකරු අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

වැඩිදුර සහාය සඳහා, කරුණාකර පිවිසෙන්න ADJ Store on Amazon or the official ADJ webඅඩවිය.