හැඳින්වීම
This manual provides detailed instructions for the proper setup, operation, and maintenance of your RadioShack Stereo 4-Channel Microphone Mixer, Model 32-2056. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Key features of this mixer include:
- Four slide-action channel faders for precise sound mixing control.
- Mono/stereo selector for versatile audio output.
- Stereo line level output for connection to ampලයිෆයර් හෝ පටිගත කිරීමේ උපකරණ.
- Battery low indicator for convenient power management.
- Operates on one 9V battery or an optional AC adapter (both sold separately).
ආරක්ෂිත තොරතුරු
Observe the following safety precautions to prevent damage to the mixer or injury to yourself:
- ඒකකය වැසි හෝ තෙතමනය නිරාවරණය නොකරන්න.
- c එක අරින්න එපාasing; සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.
- Use only the specified power source (9V battery or compatible AC adapter).
- ඒකකය අධික තාප ප්රභවයන්ගෙන් ඈත් කර තබන්න.
- ක්රියාත්මක වන අතරතුර ඒකකය වටා නිසි වාතාශ්රය සහතික කරන්න.
නිෂ්පාදනය අවසන්view
Familiarize yourself with the various controls and connections on your mixer.
Figure 1: Front panel of the RadioShack Stereo 4-Channel Microphone Mixer, showing channel faders, mono/stereo switch, power switch, and battery low indicator.
Figure 2: Front edge of the mixer, displaying the four 1/4-inch microphone input jacks (MIC 1-4).
Figure 3: Rear panel of the mixer, featuring the DC 9V power input, stereo RCA output jacks, and two sets of stereo RCA auxiliary input jacks (AUX 1 and AUX 2).
සැලසුම
Powering the Mixer
The mixer can be powered by a 9V battery or an optional AC adapter.
- බැටරි ස්ථාපනය: Open the battery compartment on the bottom of the unit. Connect a 9V battery to the battery clip and place it inside the compartment. Close the cover securely.
- AC ඇඩැප්ටර සම්බන්ධතාවය: If using an AC adapter (not included), plug its barrel connector into the DC 9V jack on the rear panel of the mixer. Plug the adapter into a standard AC outlet.
මයික්රෆෝන සම්බන්ධ කිරීම
Connect up to four microphones to the 1/4-inch MIC 1-4 input jacks located on the front edge of the mixer.
Connecting Auxiliary Audio Sources
The mixer provides two sets of stereo RCA auxiliary inputs (AUX 1 and AUX 2) on the rear panel. Connect line-level audio sources such as CD players, tape decks, or other audio devices to these inputs using RCA cables.
වෙත සම්බන්ධ කිරීම Amplifier or Recording Device
Connect the stereo RCA OUTPUT jacks on the rear panel of the mixer to the input jacks of your ampලිෆයර්, බල ගැන්වූ ස්පීකර් හෝ පටිගත කිරීමේ උපාංගය.
ක්රියාත්මක වෙනවා
බලය සක්රිය / අක්රිය
Slide the POWER switch on the front panel to the ON position to turn on the mixer. Slide it to OFF to turn off the mixer.
Adjusting Channel Levels
Each of the four channels (CHANNEL 1-4) has a dedicated slide-action fader. Move the fader up to increase the volume for that channel and down to decrease it. Adjust these faders to achieve the desired mix of your audio sources.
මොනෝ/ස්ටීරියෝ සිලෙක්ටරය
The MONO/STEREO switch allows you to select the output mode:
- ස්ටීරියෝ: Combines the left and right signals from each channel into a stereo output.
- මොනෝ: Combines all input signals into a single monaural output.
Select the appropriate mode based on your audio setup and desired sound.
නඩත්තු කිරීම
පිරිසිදු කිරීම
Wipe the exterior of the mixer with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
බැටරි ප්රතිස්ථාපනය
When the BATTERY LOW indicator illuminates, replace the 9V battery promptly to ensure uninterrupted operation and prevent potential leakage.
ගබඩා කිරීම
If storing the mixer for an extended period, remove the 9V battery to prevent leakage and potential damage. Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
දෝෂගවේෂණය
ඔබේ මික්සර් සමඟ ගැටළු ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:
- ශබ්ද ප්රතිදානය නැත:
- Ensure the mixer is powered on and the POWER switch is in the ON position.
- Check all audio cable connections to ensure they are secure and correctly plugged into the appropriate input/output jacks.
- Verify that the channel faders are raised to an audible level.
- Confirm that the connected amplifier or recording device is powered on and its volume is adjusted appropriately.
- If using battery power, check the BATTERY LOW indicator. Replace the battery if necessary.
- විකෘති ශබ්දය:
- Reduce the input level of the audio source or the channel fader to prevent clipping.
- සියලුම කේබල් හොඳ තත්ත්වයේ පවතින බවත් හානි නොවන බවත් සහතික කර ගන්න.
- BATTERY LOW Indicator On:
- The 9V battery is running low. Replace it with a fresh battery or use an AC adapter.
පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | 320-2056 |
| නාලිකා ගණන | 4 |
| ශ්රව්ය ආදානය | 4 x 1/4-inch Microphone, 2 x Stereo RCA Auxiliary |
| ශ්රව්ය ප්රතිදානය | 1 x Stereo RCA Line Level |
| බලශක්ති ප්රභවය | 9V Battery or DC 9V AC Adapter (100mA, center positive, both sold separately) |
| වෙළුමtage | 9 Volts (DC) |
| අයිතමයේ බර | රාත්තල් 2.4 (කිලෝ ග්රෑම් 1.09) |
| පැකේජ මානයන් | 12.3 x 7.8 x 3 අඟල් (31.2 x 19.8 x 7.6 cm) |
වගකීම් සහ සහාය
RadioShack products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or contact RadioShack customer support. Keep your purchase receipt as proof of purchase.
For technical assistance or further inquiries, please visit the official RadioShack webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න.
