VOLTCRAFT PPS-13610 රසායනාගාර බල සැපයුම් පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides comprehensive instructions for the safe and efficient operation of your VOLTCRAFT PPS-13610 Laboratory Power Supply. This device is designed as a potential-free DC voltage source for various laboratory and educational applications. It features adjustable voltage and current outputs, programmable memory locations, and remote control capabilities via USB.

උපාංගය ක්‍රියාත්මක කිරීමට පෙර කරුණාකර මෙම අත්පොත හොඳින් කියවා අනාගත යොමුව සඳහා තබා ගන්න.

2. ආරක්ෂිත උපදෙස්

• Always operate the power supply indoors in a dry, well-ventilated area.
• Ensure the power supply is connected to a properly grounded electrical outlet.
• උපාංගය තෙතමනය, වර්ෂාව හෝ අධික උෂ්ණත්වයන්ට නිරාවරණය නොකරන්න.
• අධික උනුසුම් වීම වැළැක්වීම සඳහා වාතාශ්රය විවරයන් අවහිර කිරීමෙන් වළකින්න.
• c එක විවෘත කිරීමට උත්සාහ නොකරන්න.asing or modify the device. Refer all servicing to qualified personnel.
• Before making any connections or disconnections, ensure the power supply is turned off.
• Use appropriate safety connectors and cables for all connections.
• Be aware of the maximum current ratings for the front (5A) and rear (20A) output terminals.

3. නිෂ්පාදන අවසන්view

The VOLTCRAFT PPS-13610 features a clear digital display and intuitive controls for precise voltage and current adjustments. Below are descriptions of the front and rear panels.

3.1 ඉදිරිපස පුවරුව

රූපය: ඉදිරිපස view of the VOLTCRAFT PPS-13610 power supply, showing the digital display, voltage and current adjustment knobs, power switch, and auxiliary output terminals.

• සංඛ්යාංක දර්ශකය: තත්‍ය කාලීන වෙළුම පෙන්වයිtage (V) and current (A) output, along with C.V. (Constant Voltage) and C.C. (Constant Current) indicators.
• වෙළුමtage ගැලපුම් බොත්තම: Used to set the output voltage. Features both fine and coarse adjustment.
• වත්මන් ගැලපුම් බොත්තම: Used to set the maximum allowable output current. Features both fine and coarse adjustment.
• බල සැපයුම් සුවිචය: ඒකකය සඳහා ප්‍රධාන බල පාලනය.
• Auxiliary Output (5A Max): Front terminals for connecting loads requiring up to 5 Amperes. These are 4 mm safety connectors.
• Rear Control Indicator: Illuminates when the unit is being controlled remotely.

3.2 පසුපස පුවරුව

රූපය: පසුපස view of the VOLTCRAFT PPS-13610 power supply, showing the main output terminals, cooling fan, power input, USB port, and remote control port.

• ප්‍රධාන ප්‍රතිදානය: Clamp connections for high current applications, supporting the full rated current (up to 20A).
• සිසිලන විදුලි පංකාව: Ensures proper thermal management of the unit.
• AC බල ආදානය: Standard IEC C14 inlet for connecting the main power cable.
• USB Port: For connecting to a computer for remote control and programming.
• දුරස්ථ පාලක වරාය: For external remote control connections.
• මාදිලියේ ස්විචය: Selects between Normal, Preset, and Remote Control modes.
• Recall Buttons (P1, P2, P3): For recalling saved voltage සහ වත්මන් සැකසුම්.

4. පිහිටුවීම

1. ඇසිරීම: Carefully remove the power supply from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. ස්ථානගත කිරීම: Place the unit on a stable, level surface. Ensure adequate clearance around the cooling fan and ventilation openings for proper airflow. Avoid direct sunlight, heat sources, and areas with excessive dust or humidity.
3. බල සම්බන්ධතාවය:
   • Ensure the power switch on the front panel is in the 'OFF' (O) position.
   • Connect the provided AC power cord to the AC Power Input on the rear panel and then to a suitable grounded electrical outlet (100-240V~, 50/60Hz).
4. ප්රතිදාන සම්බන්ධතා:
   • For loads requiring up to 5A, use the 4mm safety connectors on the front panel.
   • For loads requiring higher currents (up to 20A), use the clamp connections on the rear panel. Ensure connections are secure.
   • Always observe correct polarity (+ to + and - to -) when connecting your load.

5. මෙහෙයුම් උපදෙස්

5.1 මූලික මෙහෙයුම

1. බල ගැන්වීම: Flip the power switch on the front panel to the 'ON' (I) position. The digital display will illuminate.
2. සැකසීම් වෙළුමtage:
   • කරකවන්න වෙළුමtagඊ ගැලපුම් බොත්තම to set the desired output voltage.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
3. Setting Current Limit:
   • කරකවන්න වත්මන් ගැලපුම් බොත්තම to set the maximum allowable output current. This acts as a current limit.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
   • The current limit can be preset without a short circuit bridge.
4. සම්බන්ධක භාරය: අපේක්ෂිත පරිමාව සැකසීමෙන් පසුtage and current limit, connect your load to the appropriate output terminals (front or rear).
5. නිරීක්ෂණ ප්‍රතිදානය: The digital display shows the actual output voltagඊ සහ ධාරාව.
   • ද CV දර්ශකය illuminates when the power supply is operating in Constant Voltage mode (output voltage is stable at the set value).
   • ද CC දර්ශකය illuminates when the power supply is operating in Constant Current mode (output current is stable at the set limit, typically when the load resistance is too low for the set voltagසහ).
6. විදුලිය විසන්ධි කිරීම: Disconnect the load, then flip the power switch to the 'OFF' (O) position.

5.2 Using Preset Memory Locations

The PPS-13610 allows you to save and recall three different voltage and current limit settings.

1. අපේක්ෂිත පරිමාව සකසන්නtage and current limit using the respective adjustment knobs.
2. To save, refer to the specific instructions in the full product manual (not provided in detail here).
3. To recall a saved setting, use the P1, P2, or P3 buttons on the rear panel (ensure the Mode switch is set to 'Preset').

6. Remote Control and Programmable Features

The power supply can be controlled remotely via a USB connection to a computer, enabling advanced programmable functions.

1. USB සම්බන්ධතාවය: Connect the power supply to your computer using a standard USB cable via the USB port on the rear panel.
2. මෘදුකාංග ස්ථාපනය: Install the included software on your computer. Refer to the software's documentation for installation and usage instructions.
3. මාදිලිය තේරීම: Set the 'Mode' switch on the rear panel to 'Remote Ctrl' for computer control. The 'Rear Control' indicator on the front panel will illuminate.
4. Cyclic Workflows: The software allows you to program up to 20 different voltage and current sets with varying time periods. These workflows can be repeated up to 999 times, ideal for automated testing and experimental setups.

7. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• වාතාශ්රය: Regularly check that the cooling fan and ventilation openings are free from dust and obstructions.
• ෆියුස් ආදේශනය: If the unit fails to power on, the fuse may need replacement.
  • Ensure the power supply is completely disconnected from the mains.
  • Locate the fuse holder near the AC power input on the rear panel.
  • Replace the fuse with one of the same type and rating: T6AL250V.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided with your purchase or contact VOLTCRAFT customer service directly. Details can typically be found on the manufacturer's official webවෙබ් අඩවියෙන් හෝ ඔබේ මිලදී ගැනීමේ ස්ථානය හරහා.

නිෂ්පාදකයා: වෝල්ට්ක්‍රැෆ්ට්