1. හැඳින්වීම
This manual provides comprehensive instructions for the installation, programming, operation, and maintenance of your Chamberlain Model #1573 Garage Door Remote Control. Please read this manual thoroughly before using the device to ensure proper function and safety. This remote control is designed to operate compatible Chamberlain and LiftMaster garage door openers.
2 ආරක්ෂිත තොරතුරු
තුවාල හෝ හානි අවදානම අවම කිරීම සඳහා සෑම විටම පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- දුරස්ථ පාලක දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
- Operate the garage door only when it is in full view සහ බාධාවන්ගෙන් තොරයි.
- Never allow children to play with the garage door opener or remote control.
- Ensure the garage door is fully closed before leaving the premises.
- දේශීය රෙගුලාසිවලට අනුව බැටරි නිසි ලෙස බැහැර කරන්න.
3. නිෂ්පාදන අවසන්view
The Chamberlain Model #1573 is a compact and ergonomic garage door remote control designed for ease of use. It features multiple buttons for controlling your garage door opener.
රූපය 1: ඉදිරිපස view of the Chamberlain Model #1573 remote control. The remote is black with the "CHAMBERLAIN" logo and a circular signal icon in gold on the upper left. Below this are three distinct, rectangular control buttons.
රූපය 2: ආපසු view of the Chamberlain Model #1573 remote control. This side displays regulatory information including IC: 2666A, FCC ID: HBW1573, and the part number 41A6127-1. It also indicates "ASSEMBLED IN MEXICO" and includes a metal clip for attachment.
4. Setup & Programming
4.1. බැටරි ස්ථාපනය
The Chamberlain Model #1573 remote control requires AA or AAA batteries. To install or replace batteries:
- දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
- Remove the cover by sliding it off or unscrewing it, depending on the design.
- Insert new AA or AAA batteries, ensuring correct polarity (+/-).
- බැටරි මැදිරි ආවරණය ආරක්ෂිතව ප්රතිස්ථාපනය කරන්න.
4.2. දුරස්ථ පාලකය ක්රමලේඛනය කිරීම
To program your remote control to your garage door opener, follow these general steps. Specific steps may vary slightly depending on your garage door opener model. Refer to your garage door opener's manual for detailed instructions if needed.
- Locate the Learn Button: On your garage door opener motor unit, locate the "Learn" button. This button is usually on the back or side panel of the motor unit, often near the antenna wire. The color of the learn button (e.g., red, purple, yellow, green) may indicate the frequency or technology of your opener.
- Press the Learn Button: Press and immediately release the "Learn" button on the garage door opener. The learn indicator light will glow steadily for 30 seconds.
- Press the Remote Button: Within 30 seconds, press and hold the button on your Chamberlain remote control that you wish to use to operate the garage door.
- Release the Remote Button: Release the remote control button when the garage door opener lights flash or two clicks are heard. This indicates that the remote has been successfully programmed.
- දුරස්ථ පාලකය පරීක්ෂා කරන්න: Press the programmed button on your remote control to test its operation. The garage door should activate.
If the remote does not work, repeat the programming steps. Ensure you are within range of the garage door opener during programming.
5. මෙහෙයුම් උපදෙස්
Once programmed, operating your Chamberlain Model #1573 remote control is straightforward:
- To Open or Close the Garage Door: Press the programmed button on your remote control. The garage door will begin to move.
- To Stop the Garage Door: Press the programmed button again while the door is in motion. The door will stop.
- To Reverse the Garage Door: If the door is stopped mid-travel, pressing the button again will reverse its direction.
Ensure a clear line of sight to the garage door and that no obstructions are present before operating.
6. නඩත්තු කිරීම
6.1. බැටරි ප්රතිස්ථාපනය
If the remote control's range decreases significantly or it stops responding, the batteries may need replacement. Refer to section 4.1 for battery installation instructions. The remote uses AA or AAA batteries.
6.2 පිරිසිදු කිරීම
මෘදු වියළි රෙද්දකින් දුරස්ථ පාලකය පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න, මන්ද මේවා c වලට හානි කළ හැකිය.asing හෝ අභ්යන්තර සංරචක.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| දුරස්ථ පාලකය ක්රියා නොකරයි. | Dead or low batteries. Remote not programmed. Obstruction. | Replace batteries (AA or AAA). Reprogram the remote (see Section 4.2). Ensure no obstructions are blocking the signal or door path. |
| අඩු කළ මෙහෙයුම් පරාසය. | Low batteries. Interference. | Replace batteries. Check for sources of radio frequency interference near the garage door opener. |
| Garage door opens/closes by itself. | Stuck remote button. Interference. | Check remote buttons for sticking. Reprogram the remote and clear all previous codes from the opener. |
8. පිරිවිතර
- ආදර්ශ අංකය: #1573
- කොටස අංකය: Chamberlain Group, Inc. Chamber Remote Controller IC:2666A #1573 FCC ID:#HBW1573 (Assembled In Mexico 41A6127-1)
- වෙළඳ නාමය: චැම්බර්ලින්
- අයිතමයේ බර: අවුන්ස 2.39 කි
- පැකේජ මානයන්: අඟල් 5.12 x 2.76 x 1.93
- විශේෂ ලක්ෂණය: Ergonomic
- අවශ්ය බැටරි: Yes (AA or AAA batteries)
- උපරිම සහාය දක්වන උපාංග ගණන: 1
- ගැළපෙන උපාංග: ගරාජ් දොර විවෘත කරන්නන්
- සම්බන්ධතා තාක්ෂණය: ගුවන්විදුලි සංඛ්යාතය
- FCC හැඳුනුම්පත: HBW1573
- ආ ඇත්ත ද: 2666A
9. වගකීම් සහ සහාය
For warranty information or technical support, please refer to the official Chamberlain website or contact Chamberlain customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
මාර්ගගත සහාය: www.chamberlain.com/support
දුරකථන සහාය: චේම්බර්ලයින් වෙත යොමු වන්න webකලාපීය සම්බන්ධතා අංක සඳහා අඩවිය.
10. නියාමන තොරතුරු
FCC අනුකූලතා ප්රකාශය
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: HBW1573.
කර්මාන්ත කැනඩාව (IC) අනුකූලතා ප්රකාශය
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IC: 2666A.
