1. හැඳින්වීම
The AmScope D120A-MS is a dual-view compound monocular microscope designed for high magnification observation in biological and educational applications. It features a versatile viewing head, multiple objective lenses, Brightfield illumination, and a mechanical stage for precise specimen manipulation. This manual provides essential information for the proper setup, operation, and maintenance of your microscope.
2. ආරක්ෂිත මාර්ගෝපදේශ
- අන්වීක්ෂය සැමවිටම ප්රවේශමෙන් හසුරුවන්න. හදිසි චලනයන් හෝ බලපෑම් වලින් වළකින්න.
- අන්වීක්ෂය ඇලවීම වැළැක්වීම සඳහා ස්ථාවර, සමතලා මතුපිටක් මත තබා ඇති බවට වග බලා ගන්න.
- Connect the power cord to a grounded electrical outlet of the correct voltage (110V).
- Do not touch optical surfaces with bare hands. Use lens paper or a soft, lint-free cloth for cleaning.
- Unplug the microscope from the power source before cleaning or performing any maintenance.
- Keep the microscope away from direct sunlight, high temperatures, dust, and corrosive chemicals.
- Supervise children or inexperienced users to ensure safe operation.
3. පැකේජ අන්තර්ගතය
සියලුම සංරචක ප්රවේශමෙන් ඉවත් කර පහත අයිතම ඇතුළත් කර ඇති බව තහවුරු කරන්න:
- AmScope D120A-MS microscope with mechanical stage
- WF10x eyepiece
- WF16x eyepiece
- 4x DIN achromatic objective
- 10x DIN achromatic objective
- 40xS DIN achromatic objective (spring-loaded)
- 100xS (oil) DIN achromatic objective (spring-loaded)
- (2) Color filters
- අමතර බල්බය
- දූවිලි ආවරණය
- උපදෙස් අත්පොත (මෙම ලේඛනය)
4. සංරචක හඳුනා ගැනීම
Familiarize yourself with the main parts of your AmScope D120A-MS microscope:
රූපය 4.1: ඉවරයිview of the AmScope D120A-MS microscope. This image displays the complete microscope assembly, including the base, stage, objective lenses, and dual-view monocular head.
- Eyepiece (Ocular): ඔබ බලන තැන view the specimen. The D120A-MS includes WF10x and WF16x eyepieces.
- මොනොකියුලර් Viewප්රධානියා: The upper part of the microscope containing the eyepiece tube. This model features a dual-view head with a fixed 45-degree inclined tube and a vertical port.
- Revolving Nosepiece: Holds the objective lenses and allows for easy switching between magnifications.
- වෛෂයික කාච: The primary magnification components (4x, 10x, 40xS, 100xS oil).
- යාන්ත්රික එස්tage: A platform where the specimen slide is placed, with controls for precise X-Y movement.
- Stagඉ ක්ලිප්: Secure the specimen slide on the mechanical stage.
- Coarse Focus Knob: Large knob for rapid focusing adjustments.
- Fine Focus Knob: Small knob for precise focusing adjustments.
- Illuminator (Light Source): Located beneath the stage, provides light for viewing. This model uses variable-intensity tungsten illumination.
- ඇබේ කන්ඩෙන්සර්: Located below the stage, focuses light onto the specimen. Features a 1.25 NA and an iris diaphragm.
- අයිරිස් ප්රාචීරය: Controls the amount of light passing through the specimen.
- පදනම: The stable bottom support of the microscope.
5. එකලස් කිරීම සහ සැකසීම
Follow these steps to set up your microscope for initial use:
- ඇසිරීම: ඇසුරුම්කරණයෙන් අන්වීක්ෂය සහ සියලුම උපාංග ප්රවේශමෙන් ඉවත් කරන්න. අනාගත ප්රවාහනය හෝ ගබඩා කිරීම සඳහා මුල් ඇසුරුම් තබා ගන්න.
- ස්ථානගත කිරීම: Place the microscope on a sturdy, level surface, away from vibrations and direct sunlight.
- අක්ෂි කාච ස්ථාපනය: Insert the desired eyepiece (WF10x or WF16x) into the inclined eyepiece tube of the monocular head. Gently twist to secure it.
- අරමුණු ස්ථාපනය: The objective lenses are typically pre-installed. If not, carefully screw each objective into the revolving nosepiece in increasing order of magnification (4x, 10x, 40xS, 100xS). Ensure they are finger-tight.
- බල සම්බන්ධතාවය: Connect the power cord to the microscope's power input and then to a standard 110V electrical outlet.
- දූවිලි ආවරණය: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris.
රූපය 5.1: සමීප රූපය view of the objective lenses mounted on the revolving nosepiece. This image shows the 4x, 10x, 40xS, and 100xS (oil) objectives in position.
6. මූලික මෙහෙයුම
This section outlines the fundamental steps for observing specimens with your microscope.
- බල ගැන්වීම: Flip the power switch located on the base of the microscope. The illuminator should light up.
- ආලෝකකරණය සකසන්න: Use the variable intensity control knob to set the desired brightness. Adjust the iris diaphragm on the Abbe condenser to optimize contrast and resolution for your specimen.
- ස්ථාන ආදර්ශය: Rotate the revolving nosepiece to select the lowest power objective (4x). Lower the mechanical stage using the coarse focus knob. Place a prepared specimen slide onto the mechanical stage සහ s සමඟ එය සුරක්ෂිත කරන්නtagඊ ක්ලිප්.
- Position Specimen: XY s භාවිතා කරන්නtage control knobs to move the slide until the area of interest is centered under the objective lens.
- අවධානය යොමු කිරීම:
- While looking through the eyepiece, slowly raise the stagඊ භාවිතා කරයි coarse focus knob until the specimen comes into rough focus.
- භාවිතා කරන්න fine focus knob to achieve a sharp, clear image.
- විශාලනය වෙනස් කරන්න: Once focused at low power, rotate the revolving nosepiece to switch to a higher power objective (e.g., 10x, 40xS). Due to the parfocal design, only minor adjustments with the fine focus knob should be needed to bring the image back into sharp focus.
- Using the 100xS Oil Immersion Objective:
- After focusing with the 40xS objective, rotate the nosepiece halfway between the 40xS and 100xS objectives.
- Place a small drop of immersion oil directly onto the center of the specimen slide where the light passes through.
- Carefully rotate the 100xS objective into the oil drop until it clicks into place. The objective should be immersed in the oil.
- භාවිතා කරන්න fine focus knob to bring the image into sharp focus. Do not use the coarse focus knob with the 100xS objective.
- After use, clean the 100xS objective and the slide immediately with lens paper moistened with lens cleaning solution to remove all immersion oil.
- ද්විත්ව-View ක්රියාකාරීත්වය: The vertical port on the monocular head can accept a second eyepiece for simultaneous viewing by another person or a camera mount for digital image capture (eyepiece and camera sold separately). Dioptric adjustment on the upright tube accommodates individual eye-strength differences.
රූපය 6.1: The AmScope D120A-MS microscope demonstrating its digital image capture capability by connecting to a laptop. This setup utilizes the vertical port for a camera attachment.
7. නඩත්තුව සහ රැකවරණය
Proper maintenance ensures the longevity and optimal performance of your microscope.
- කාච පිරිසිදු කිරීම: Use only specialized lens paper and lens cleaning solution for optical surfaces. Gently wipe in a circular motion. Never use abrasive cloths or harsh chemicals.
- සාමාන්ය පිරිසිදු කිරීම: අන්වීක්ෂීය බඳ මෘදු, d රෙදි කැබැල්ලකින් පිස දමන්න.amp cloth. Avoid getting moisture into electrical components.
- ගබඩා: Always cover the microscope with the dust cover when not in use. Store it in a dry, dust-free environment.
- බල්බ ආදේශනය: If the illuminator bulb burns out, unplug the microscope. Refer to the base of the microscope for access to the bulb compartment. Carefully replace the old bulb with the provided spare bulb, ensuring not to touch the glass part of the new bulb with bare hands.
- යාන්ත්රික කොටස්: Do not attempt to lubricate or disassemble any mechanical parts. If issues arise, contact customer support.
8. දෝශ නිරාකරණය
මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ආලෝකයක් නැත | Power cord disconnected, power switch off, bulb burnt out | Check power connection, turn on switch, replace bulb |
| රූපය නොපැහැදිලි හෝ අවධානයෙන් තොරයි. | Incorrect focus adjustment, objective not fully engaged, dirty lens | Adjust coarse/fine focus, rotate nosepiece until objective clicks, clean lenses |
| Dark field of view | Iris diaphragm closed, illuminator too dim, condenser too low | Open iris diaphragm, increase illuminator brightness, adjust condenser height |
| Dust or spots in view | Dust on eyepiece, objective, or slide | Clean eyepiece, objective, or slide with lens paper |
| Cannot focus at 100x | No immersion oil, air bubbles in oil, coarse focus used | Apply immersion oil, remove air bubbles, use only fine focus |
9. තාක්ෂණික පිරිවිතර
Detailed specifications for the AmScope D120A-MS microscope:
- හිස: Compound dual-view monocular, 45-degree inclined, 360-degree rotatable
- අක්ෂි කොටස්: WF10x, WF16x (with pointer)
- අරමුණු: 4X, 10x, 40xS (spring), 100xS (oil, spring) DIN achromatic
- විශාලන පරාසය: 40X - 1600X
- Stage: යාන්ත්රික එස්tage with X-Y axis movement, stagඊ නවත්වන්න
- ආලෝකකරණ වින්යාසය: Transmitted (lower)
- කන්ඩෙන්සර්: Abbe, 1.25 NA
- ප්රාචීරය: අයිරිස් ප්රාචීරය
- ආලෝක ප්රභවය: Tungsten (incandescent), variable intensity
- ආලෝකකරණ වර්ගය: බ්රයිට්ෆීල්ඩ්
- බලය: 110V
- ද්රව්ය: Metal, tungsten
- මානයන් (H x W x D): අඟල් 15 x 7.5 x 5.125 (ආසන්න)
- බර: රාත්තල් 10 කි
10. වගකීම් සහ පාරිභෝගික සහාය
For warranty information, technical assistance, or to purchase replacement parts, please contact AmScope customer support. Refer to the AmScope webවත්මන් සම්බන්ධතා තොරතුරු සඳහා වෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි.
