හැඳින්වීම
The Chief TS325TU Medium THINSTALL Dual Swing Arm Wall Display Mount is designed to provide a secure and versatile mounting solution for flat panel displays ranging from 30 to 52 inches. This mount offers an ultra-low profile when collapsed and extends up to 25 inches, allowing for optimal viewing angles with its Centris low-profile tilt and Centerless lateral shift capabilities. It features integrated cable management for a clean installation.
ආරක්ෂිත තොරතුරු
අවවාදයයි: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of product warranty. If you have any questions, contact Chief customer service or a qualified installer.
- උපරිම බර පැටවීමේ ධාරිතාව ඉක්මවා නොයන්න රාත්තල් 75.00 (කිලෝග්රෑම් 34).
- සවිකරන පෘෂ්ඨය සවිකිරීමේ සහ සංදර්ශකයේ ඒකාබද්ධ බරට ආරක්ෂිතව සහාය විය හැකි බව සහතික කර ගන්න.
- Always mount to structural studs or appropriate wall anchors. Note that this mount is designed for studs approximately 16 inches apart.
- Use appropriate tools and follow all local building codes.
- ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
පැකේජයේ අන්තර්ගතය
ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:
- 1 x Main Assembly
- 1 x Wall Rail
- 1 x Right Upright
- 1 x Left Upright
- 1 x Top Interface Support
- 1 x Bottom Interface Support
- 2 x Wall Rail Cover
- 1 x Lag Screw Cover
- 1 x Bumper
- 1 x Latch Spacer
- 2 x Long Adhesive
- 4 x Short Adhesive
- Mounting Hardware (various screws, washers, spacers)
සැකසුම සහ ස්ථාපනය
Proper installation is critical for the safety and performance of your display mount. It is recommended to have at least two people for installation due to the weight and size of the mount.
අවශ්ය මෙවලම් (ඇතුළත් කර නැත):
- අධ්යයන සෙවුම
- සුදුසු සරඹ බිටු සමඟ සරඹ කරන්න
- මට්ටම
- ටේප් මිනුම
- Socket Wrench / Ratchet
- ෆිලිප්ස් හෙඩ් ඉස්කුරුප්පු නියන
- පැන්සල
පියවරෙන් පියවර ස්ථාපනය:
- බිත්තිය සකස් කරන්න:
Locate and mark the center of two adjacent wall studs. This mount is designed for standard 16-inch stud spacing. Ensure there are no electrical wires or plumbing in the drilling path. It is highly recommended to plan your entire layout, including TV, speakers, and wiring, before drilling.
- Attach Wall Rail:
Position the Wall Rail on the marked studs, ensuring it is level. Mark the pilot hole locations. Drill pilot holes into the studs. Secure the Wall Rail to the wall using the provided lag screws. Ensure the screws are tightened securely but do not overtighten to avoid stripping.
Image: Main assembly of the Chief TS325TU mount, showing the wall plate, articulating arms, and display interface.
- Assemble Display Interface:
Attach the Right and Left Uprights to the back of your display using the appropriate screws, washers, and spacers from the mounting hardware kit. Ensure the uprights are centered and level on the display. Then, attach the Top and Bottom Interface Supports to the uprights.
- Mount Display to Wall Rail:
Carefully lift the display with the attached interface and hook it onto the Wall Rail. The design allows for post-installation lateral shift of up to 16 inches (406 mm) for limitless centering capability. Secure the display to the mount according to the specific instructions in the detailed manual (refer to manufacturer's full manual for precise steps).
රූපය: පැත්ත view of the Chief TS325TU mount, illustrating its compact profile when retracted and the extension capability.
- කේබල් කළමනාකරණය:
Utilize the enclosed, tool-free cable covers and the wide open wall plate to route power and signal cables. This helps maintain a clean and organized appearance.
කන්ද ක්රියාත්මක කිරීම
The Chief TS325TU mount offers flexible positioning for your display:
- දිගුව: The mount extends up to 25 inches (635 mm) from the wall, maximizing viewing potential from various positions in the room.
- ඇලවීම: The Centris low-profile tilt mechanism allows for up to 15 degrees of effortless fingertip tilt. This enables you to achieve optimal viewing angles and reduce glare.
- කැරකෙන/පෑන්: The dual swing arms allow for significant swivel capabilities, enabling you to turn the display left or right to suit your viewඅවශ්යතා.
- Lateral Shift: After installation, the display can be shifted laterally along the wall plate by up to 16 inches (406 mm) to fine-tune its horizontal position without re-drilling.
රූපය: කෝණික view of the Chief TS325TU mount, highlighting its robust construction and articulating design.
නඩත්තු කිරීම
Regular maintenance ensures the longevity and safe operation of your mount:
- පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් නිතිපතා මවුන්ට් එක දූවිලි කරන්න. මුරණ්ඩු සලකුණු සඳහා, තරමක් d භාවිතා කරන්න.amp cloth with mild soap, then wipe dry. Avoid abrasive cleaners or solvents.
- සම්බන්ධතා පරීක්ෂා කරන්න: Periodically check all screws and bolts to ensure they remain tight. Do not overtighten.
- චලන පරීක්ෂාව: Occasionally extend, retract, tilt, and swivel the mount to ensure smooth operation. If movement becomes stiff, consult the troubleshooting section or contact support.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| කන්ද අස්ථායී හෝ සෙලවෙන බවක් දැනේ. | Loose wall mounting bolts or display attachment screws. | Carefully re-tighten all wall and display attachment screws. Do not overtighten. If the issue persists, consult a professional installer. |
| Difficulty extending or retracting the arm. | Friction in the arm joints. | Ensure the mount is not overloaded. Check for any obstructions. The mount is designed for smooth movement; excessive force should not be required. |
| Display does not tilt smoothly. | Tilt mechanism tension. | The Centris tilt mechanism is designed for fingertip adjustment. Refer to the full manufacturer's manual for specific tilt tension adjustment procedures if needed. |
| Cables are not neatly managed. | Improper routing through cable covers. | Re-route cables through the integrated cable covers on the arms and wall plate for a cleaner look. |
For complex issues or if you are unsure about any step, please contact Chief customer support or a certified installer.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදන ආකෘතිය | TS325TU |
| වෙළඳ නාමය | ප්රධානියා |
| සවිකිරීමේ වර්ගය | වෝල් මවුන්ට් |
| චලන වර්ගය | ඇලවීම, සන්ධි කිරීම |
| උපරිම බර පැටවීමේ ධාරිතාව | රාත්තල් 75.00 (කිලෝග්රෑම් 34) |
| Minimum Compatible Display Size | අඟල් 30 |
| Maximum Compatible Display Size | අඟල් 52 |
| උපරිම දිගුව | අඟල් 25 (මි.මී. 635) |
| උපරිම ඇල කෝණය | අංශක 15 |
| Lateral Shift Adjustment | Up to 16 Inches (406 mm) |
| නිෂ්පාදන මානයන් (හැකිලී ඇත) | 1.3 x 29.5 x 17.2 අඟල් (33 x 749 x 437 මි.මී.) |
| අයිතමයේ බර | රාත්තල් 1 (කිලෝ ග්රෑම් 0.45) Note: This weight seems unusually low for a mount of this type and capacity. Please refer to official manufacturer documentation for precise weight. |
| ද්රව්ය | ලෝහ |
| වර්ණය | කළු |
වගකීම් සහ සහාය
For detailed warranty information, please refer to the official Chief Manufacturing website or the documentation included with your product. Chief provides support for their products to ensure customer satisfaction.
If you require technical assistance, have questions about installation, or need to report a missing part, please visit the official Chief Manufacturing support page or contact their customer service directly. Contact information can typically be found on their webඅඩවිය:
