ටිම්කන් 37625 ෙට්පර්ඩ් රෝලර් ෙබයාරිං උපදෙස් අත්පොත

1. නිෂ්පාදන අවසන්view

This manual provides essential information for the proper installation, operation, and maintenance of your Timken 37625 Tapered Roller Bearing single cup. Adhering to these guidelines will ensure optimal performance and longevity of the bearing.

The Timken 37625 is a single cup (outer ring) designed to be paired with a compatible cone (inner ring assembly, sold separately) to form a complete single tapered roller bearing. This bearing is engineered for applications that support both radial and axial loads.

Figure 1: Timken 37625 Tapered Roller Bearing Single Cup. This image shows the metallic ring component, which is the outer race of the bearing.

2. පිහිටුවීම සහ ස්ථාපනය

The 37625 single cup must be correctly matched and assembled with its corresponding cone to form a complete tapered roller bearing unit. Proper mounting is crucial for bearing performance.

• Matching Components: Ensure the cup is paired with the correct cone assembly as specified by Timken for your application. The selection depends on the load requirements and necessary radial internal clearance.
• පිරිසිදුකම: Ensure the bearing assembly, shaft, and housing are clean and free of debris, dust, or contaminants before installation.
• සවි කිරීම: Tapered roller bearings are generally mounted in opposing pairs on a shaft to evenly distribute loads and provide stability. Follow standard industrial practices for bearing installation, often involving press fitting or heating the cup for easier assembly.
• ලිහිසි තෙල්: Apply initial lubrication during assembly. Refer to the Maintenance section for lubrication guidelines.
• ගැලපීම්: The open design allows for accurate adjustments during installation to achieve proper bearing preload or clearance.

රූපය 2: ඉදිරිපස view technical drawing of the Timken 37625 bearing cup, showing its circular profile and internal dimensions.

රූපය 3: පැත්ත view technical drawing of the Timken 37625 bearing cup, illustrating its width and overall profile.

රූපය 4: ඉහළ view technical drawing of the Timken 37625 bearing cup, detailing its tapered cross-section.

3. මෙහෙයුම් මූලධර්ම

Once properly installed with its cone, the Timken 37625 tapered roller bearing functions to reduce rotational friction and support mechanical loads.

• ආධාරක පැටවීම: The bearing is designed to effectively support both radial (perpendicular to the shaft) and axial (parallel to the shaft) loads. This makes it suitable for high-load, moderate-speed applications.
• උෂ්ණත්ව පරාසය: The bearing is stable and performs reliably in temperatures ranging from -54 to 120 degrees C (-65 to 250 degrees F).
• යෙදුම්: Common applications include automotive axle systems, conveyor systems, and heavy-duty industrial machinery in sectors such as mining, construction, and agriculture.

4. නඩත්තු කිරීම

Proper maintenance, particularly lubrication, is critical for the longevity and optimal performance of your Timken 37625 bearing.

• ලිහිසි තෙල්: As an open bearing component, the 37625 cup requires lubrication to be applied in place. Use high-quality industrial grease or oil suitable for tapered roller bearings and your specific operating conditions.
• නැවත යෙදීම: Periodically reapply lubrication based on usage, operating environment, and manufacturer recommendations. Insufficient lubrication is a primary cause of premature bearing failure.
• පරීක්ෂාව: Regularly inspect the bearing for signs of wear, corrosion, pitting, or contamination. Look for unusual noises, vibrations, or excessive heat during operation.
• පිරිසිදු කිරීම: If the bearing is disassembled for maintenance, clean all components thoroughly before reassembly and relubrication.

5. දෝශ නිරාකරණය

While the Timken 37625 is a durable component, issues can arise from improper installation, inadequate lubrication, or extreme operating conditions. Below are common issues and potential solutions:

• අධික ශබ්දය හෝ කම්පනය:
  විය හැකි හේතු: Insufficient lubrication, contamination (dirt, debris), improper fit (too loose or too tight), misalignment, or damaged components.
  ක්‍රියාව: Check lubrication levels and quality. Inspect for contaminants. Verify proper seating and alignment of the bearing. If damage is present, replacement may be necessary.
• අධික උනුසුම් වීම:
  විය හැකි හේතු: Lack of lubrication, excessive preload (over-tightening), misalignment, or overloading.
  ක්‍රියාව: Ensure adequate and correct lubrication. Adjust bearing preload according to specifications. Verify proper alignment of the shaft and housing. Reduce load if consistently exceeding bearing capacity.
• Premature Wear or Failure:
  විය හැකි හේතු: Abrasive contaminants, insufficient or incorrect lubrication, overloading, improper installation, or material fatigue.
  ක්‍රියාව: Ensure a clean operating environment. Verify lubrication type and schedule. Confirm that the bearing is not subjected to loads beyond its design capacity. Re-evaluate installation procedures.

If problems persist after attempting these solutions, it is recommended to consult a qualified industrial mechanic or contact Timken technical support for further assistance.

6. පිරිවිතර

Key technical specifications and characteristics of the Timken 37625 Tapered Roller Bearing single cup:

6.1 සාමාන්ය ලක්ෂණ

• සම්පූර්ණ තනි ටේපර්ඩ් රෝලර් බෙයාරිං එකක් සෑදීම සඳහා කේතු වලට සම්බන්ධ කිරීම සඳහා තනි කෝප්පයක් (පිටත වළල්ල) (අභ්‍යන්තර වළලු එකලස් කිරීම්, වෙන වෙනම විකුණනු ලැබේ).
• භ්‍රමණය වන සහ භ්‍රමණය නොවන සාමාජිකයෙකු අතර රේඩියල් සහ අක්ෂීය භාරයන් දෙකටම සහය දක්වයි.
• මෙහෙයුම් උෂ්ණත්වය -54 සිට 120 අංශක C (-65 සිට 250 අංශක F) දක්වා පරාසයක පවතී.
• High alloy steel construction for durability and heat tolerance.
• ලිහිසිකරණය සඳහා විවෘත වින්‍යාසය යොදන ලදී.

6.2. Dimensional and Material Specifications

7. වගකීම් තොරතුරු

The Timken Company manufactures its products to high-quality standards. For specific warranty terms and conditions applicable to the Timken 37625 Tapered Roller Bearing, please refer to the official Timken Company warranty policy documentation or contact Timken directly. Warranty coverage typically addresses manufacturing defects under normal use conditions.

8. සහාය සහ සම්බන්ධතා

For technical assistance, product inquiries, or further support regarding your Timken 37625 Tapered Roller Bearing, please contact the manufacturer:

• නිෂ්පාදකයා: ටිම්කන් සමාගම
• ස්ථානය: Canton, Ohio, USA
• අමතන්න: Please refer to the official Timken Company website or your product supplier for the most current contact information and support resources.