Klipsch R-5650-S II In-Wall Speaker User Manual

1. හැඳින්වීම

ස්තූතියි, උදව් කළාටasing the Klipsch R-5650-S II In-Wall Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read these instructions thoroughly before beginning installation or use to ensure optimal performance and safety.

ප්රධාන ලක්ෂණ:

• Dual 1-inch (2.54cm) Titanium diaphragm compression driver mated to a pivoting 90° x 90° square Tractrix Horn.
• 6.5-inch Cerametallic cone woofer for robust bass response.
• Two vertically stacked Tractrix Horn-loaded tweeters designed to enhance surround sound effects.
• Horn-loaded technology engineered to increase acoustic output and reduce distortion.
• IR receiver knock out for integration with remote control systems.

2. ආරක්ෂිත උපදෙස්

Always observe the following safety precautions to prevent damage to the speaker or injury to yourself:

• උපදෙස් කියවන්න: නිෂ්පාදිතය ක්රියාත්මක කිරීමට පෙර සියලුම ආරක්ෂිත සහ මෙහෙයුම් උපදෙස් කියවිය යුතුය.
• තබා ගන්න උපදෙස්: ආරක්ෂාව සහ මෙහෙයුම් උපදෙස් අනාගත පරිශීලනය සඳහා තබා ගත යුතුය.
• අනතුරු ඇඟවීම් පිළිපදින්න: නිෂ්පාදනයේ සහ මෙහෙයුම් උපදෙස් වල සියලුම අනතුරු ඇඟවීම් පිළිපැදිය යුතුය.
• ස්ථාපනය: Installation should only be performed by qualified personnel. Ensure the mounting surface can support the speaker's weight.
• රැහැන් ඇදීම: Ensure all wiring is correctly connected and insulated to prevent short circuits or electrical hazards. Turn off power to the ampසම්බන්ධතා ඇති කර ගැනීමට පෙර ජීවිත කාලය.
• තෙතමනය: This speaker is not waterproof. Do not expose it to water or excessive moisture.
• පිරිසිදු කිරීම: Unplug the product from the amplifier before cleaning. Use a dry cloth only.

3. පැකේජ අන්තර්ගතය

The Klipsch R-5650-S II In-Wall Speaker package typically includes:

• One (1) Klipsch R-5650-S II In-Wall Speaker
• Installation Template (usually printed on the packaging)

Note: Additional tools and wiring are required for installation and are not included.

4. පිහිටුවීම සහ ස්ථාපනය

Proper installation is crucial for optimal sound performance and speaker longevity. Consult a professional installer if you are unsure about any steps.

4.1 Planning Speaker Placement

For surround sound applications, position the R-5650-S II speakers on the side or rear walls, typically at or slightly above ear level when seated. The unique horn array allows for flexible placement while maintaining an enveloping sound field.

4.2 Wall Preparation

1. ස්ථාන සොයා ගන්න: Use a stud finder to locate wall studs and avoid them when choosing your mounting location. Ensure there are no electrical wires or plumbing in the desired area.
2. Trace Cutout: Use the provided cutout template to trace the opening on the wall.
3. කැපුම් විවරය: Carefully cut the opening in the drywall using a drywall saw.

4.3 රැහැන් සම්බන්ධතා

සම්බන්ධතා ඇති කර ගැනීමට පෙර, ඔබේ amplifier or receiver is turned off and unplugged from the power outlet.

1. Run speaker wire (minimum 16-gauge, heavier for longer runs) from your amplifier to the wall opening.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of the speaker wires.
3. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the amplifier. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.

රූපය 1: අභ්යන්තර view of the Klipsch R-5650-S II In-Wall Speaker, showing the woofer, dual tweeters, and crossover components.

4.4 කථානායක සවිකිරීම

1. Carefully insert the speaker into the wall opening.
2. Tighten the dog-leg mounting clamps (usually by turning screws on the front baffle) until the speaker is securely fastened to the wall. Do not overtighten.
3. Attach the magnetic grille to the speaker baffle. The grille is designed to snap into place.

5. මෙහෙයුම් උපදෙස්

Once installed and connected, your Klipsch R-5650-S II In-Wall Speaker is ready for use.

1. සියලුම සම්බන්ධතා ආරක්ෂිත බව සහතික කර ගන්න.
2. ප්ලග් ඉන් සහ ඔබේ බලය ampලයිෆයර් හෝ ග්රාහකයා.
3. ඔබගේ සුදුසු ආදාන ප්‍රභවය තෝරන්න ampජීවිතාරක්ෂකයා.
4. Start playback at a low volume and gradually increase it to your desired listening level.

The pivoting Tractrix Horn allows you to direct the high-frequency sound towards the primary listening area for optimized sound imaging.

6. නඩත්තු කිරීම

Your Klipsch R-5650-S II In-Wall Speaker requires minimal maintenance.

• පිරිසිදු කිරීම: Use a soft, dry cloth to gently wipe the speaker grille and frame. Avoid using abrasive cleaners, solvents, or excessive moisture.
• ග්රිල් රැකවරණය: The magnetic grille can be removed for cleaning if necessary. Handle with care to avoid bending or damaging it.
• පරීක්ෂාව: ස්පීකර් වයර් සම්බන්ධතා ආරක්ෂිතව පවතින බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.

7. දෝශ නිරාකරණය

If you encounter issues with your speaker, refer to the following common troubleshooting steps:

8. පිරිවිතර

9. වගකීම් තොරතුරු

The Klipsch R-5650-S II In-Wall Speaker comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Klipsch webවෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීම සමඟ ඇතුළත් වගකීම් කාඩ්පත. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

10. සහාය

වැඩිදුර සහාය, තාක්ෂණික සහාය, හෝ view additional product information, please visit the official Klipsch webඅඩවිය:

www.klipsch.com