Thule 532 Freeride සයිකල් වාහක උපදෙස් අත්පොත

හැඳින්වීම

The Thule 532 Freeride Cycle Carrier is designed for secure and convenient transportation of bicycles on your vehicle's roof. This carrier features a robust design, adjustable quick straps for wheels, and a locking mechanism to secure both the bike to the carrier and the carrier to the load bars. It accommodates various bike frame dimensions, ensuring a wide range of compatibility.

ආරක්ෂිත තොරතුරු

• Always ensure the carrier and bicycle are securely mounted before driving.
• Check all fasteners and straps regularly, especially before and after long journeys.
• Adhere to the maximum load capacity of 37.5 pounds per carrier.
• Be aware of the increased vehicle height and width when the carrier and bike are installed. Exercise caution in low-clearance areas such as garages, carports, and drive-thrus.
• Avoid using this carrier with carbon frames if the frame clamp directly contacts the carbon, as it may cause damage. Consult your bicycle manufacturer's guidelines.
• Do not exceed the vehicle manufacturer's recommended roof load capacity.
• Drive at reduced speeds, especially in strong winds, over rough terrain, or when cornering.

සැකසුම සහ ස්ථාපනය

Proper installation is crucial for the safe operation of your Thule Freeride Cycle Carrier. Follow these steps carefully:

1. සංරචක ඉවත් කරන්න: Carefully remove all parts from the packaging. Verify that all components listed in the product manual are present.
   

   Figure 1: Main components of the Thule 532 Freeride Cycle Carrier.
2. Attach to Load Bars: The carrier attaches to your vehicle's roof load bars. The Thule 532 Freeride is compatible with various bar types, including Thule WingBar, SlideBar, SquareBar, and ProBar. Use the appropriate mounting hardware (T-track adapters for WingBar/SlideBar/ProBar or U-bolts for SquareBar) provided with your carrier.
   

   Figure 2: Adjusting a component during installation on the load bars.

   • For T-track mounting: Slide the T-track adapters into the top channel of your load bars and secure the carrier base.
   • For U-bolt mounting: Position the carrier on top of the load bars and secure it from underneath using the U-bolts and tightening knobs.

   Ensure the carrier is centered and firmly tightened to prevent movement during transit.

3. Adjust Frame Clamp: රාමුව clamp arm can be adjusted to accommodate different bike frame sizes. The carrier fits round frames from 22-70 mm and oval frames from 65-80 mm. Adjust the clamp's position along the carrier rail to align with your bike's downtube.
   

   Figure 3: Detail of the adjustable frame clamp යාන්ත්රණය.

4. Position Wheel Trays and Straps: The wheel trays and quick straps are designed to secure the bicycle wheels. Adjust their position along the carrier rail to match your bike's wheelbase. The straps are adjustable to fit all wheel dimensions.
   

   Figure 4: The quick-release wheel strap for securing bicycle wheels.

මෙහෙයුම් උපදෙස්

Follow these steps to load and secure your bicycle:

1. වාහකය සූදානම් කරන්න: Ensure the frame clamp arm is open and the wheel straps are unfastened and ready.
2. Lift and Position Bicycle: Carefully lift your bicycle onto the carrier. Align the downtube with the frame clamp and the wheels with the wheel trays.
   

   Figure 5: A mountain bike securely mounted on the Thule Freeride carrier.
3. රාමුව සුරක්ෂිත කරන්න: Close the frame clamp around the bicycle's downtube. Tighten the clamp knob until the bike is firmly held. The carrier is lockable, securing the bike to the carrier.
4. Fasten Wheels: Use the quick straps to secure both the front and rear wheels into their respective trays. Pull the straps tight to prevent wheel movement.
   

   Figure 6: A road bike mounted on the carrier, demonstrating versatility.

5. ආරක්ෂාව සත්‍යාපනය කරන්න: Before driving, gently shake the bicycle to ensure it is securely fastened and there is no excessive movement. Double-check all locking mechanisms.

නඩත්තු කිරීම

Regular maintenance will prolong the life of your Thule Freeride Cycle Carrier:

• පිරිසිදු කිරීම: Clean the carrier with mild soap and water after each use, especially after exposure to road salt or dirt. Rinse thoroughly and dry.
• ලිහිසි තෙල්: Periodically lubricate moving parts, such as the frame clamp mechanism and locking cylinders, with a silicone-based lubricant.
• පරීක්ෂාව: Regularly inspect all bolts, nuts, and straps for signs of wear, damage, or loosening. Replace any worn or damaged parts immediately.
• ගබඩා: When not in use, store the carrier in a dry, protected area to prevent corrosion and damage from extreme weather conditions.

දෝෂගවේෂණය

පිරිවිතර

• ආකෘතිය: FBA_532002
• වෙළඳ නාමය: තුලේ
• වර්ණය: රිදී
• මානයන් (L x W x H): අඟල් 58.66 x 8.27 x 3.31 (නිෂ්පාදන මානයන් අනුව ආසන්න වශයෙන්)
• අයිතමයේ බර: රාත්තල් 7.7 කි
• පැටවීමේ ධාරිතාව: පවුම් 37.5 (කිලෝ ග්‍රෑම් 17)
• සවිකිරීමේ වර්ගය: Wheel Mount, Strap Mount
• රාමු අනුකූලතාව: Round frames 22-70 mm, Oval frames 65-80 mm
• Wheel Compatibility: All wheel dimensions with adjustable quick straps
• අගුලු දැමිය හැකි: Yes (bike to carrier, carrier to load carrier)
• Thru-axle compatible: ඔව්

වගකීම් සහ සහාය

Thule products are tested and are subject to strict quality controls and are guaranteed against defects in material and workmanship. For specific warranty details and duration, please refer to the official Thule webවෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීම සමඟ ඇතුළත් වගකීම් කාඩ්පත.

For technical support, spare parts, or further assistance, please visit the official Thule support page or contact their customer service. Keep your purchase receipt and model number (FBA_532002) handy when contacting support.

නිල තූල් Webඅඩවිය: www.thule.com