ProMaster LS1(N) Basic Light Stand (Model 9245) Instruction Manual

හැඳින්වීම

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

ප්රධාන ලක්ෂණ

• සැහැල්ලු සහ අතේ ගෙන යා හැකි නිර්මාණය.
• Adjustable height for versatile lighting setups.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Durable aluminum alloy construction.
• Stable tripod base.

සැකසුම් උපදෙස්

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. ස්ථාවරය පැතලි, ස්ථාවර මතුපිටක් මත තබන්න.
3. ත්‍රිපාද කකුල් සම්පූර්ණයෙන්ම දිගු වී ස්ථාවර වන තුරු මෘදු ලෙස විහිදුවන්න.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

මෙහෙයුම් උපදෙස්

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

උස සකස් කිරීම

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

උපාංග ඇමිණීම

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

රූපය 2: සමීප රූපයක් view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

රැකවරණය සහ නඩත්තුව

• සියලුම අගුලු දැමීමේ යාන්ත්‍රණ සහ ඉස්කුරුප්පු වල තද බව නිතිපතා පරීක්ෂා කරන්න.
• Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

දෝෂගවේෂණය

ස්ථාවර අස්ථාවරත්වය

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

උස සකස් කිරීමේ අපහසුතාව

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

නිෂ්පාදන පිරිවිතර

වගකීම් සහ සහාය

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න. මිලදී ගැනීම සනාථ කිරීම සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.