Televes 5363 Multiband Amplifier පරිශීලක අත්පොත

1. හැඳින්වීම

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

ප්රධාන ලක්ෂණ:

• බ්රෝඩ්බෑන්ඩ් ampඉසිලීම.
• Incorporates switched-mode power supplies.
• Allows mixing of MATV signals via an independent input.
• සංයුක්ත මානයන්: 180 x 110 x 55 මි.මී.
• High-shielding chassis, manufactured from Zamak.
• වෙනම amplification with very low noise figure, preserving signal quality.
• Ultra-reduced ergonomic design.

රූපය 1: පසුපස view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2 ආරක්ෂිත තොරතුරු

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• බල සැපයුම: Ensure the device is connected to a power outlet with the correct voltage and frequency as specified in the technical specifications.
• වාතාශ්රය: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
• තෙතමනය: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp පරිසරයන්.
• පිරිසිදු කිරීම: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
• සේවා: මෙම නිෂ්පාදනය ඔබම සේවය කිරීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් සේවකයින් වෙත යොමු කරන්න.
• සවි කිරීම: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Televes 5363 Multiband Ampජීවිතාරක්ෂකයා
• Power cable (integrated or separate, depending on model variant)
• උපදෙස් අත්පොත (මෙම ලේඛනය)
• සවි කිරීමේ උපාංග (ඉස්කුරුප්පු, බිත්ති ප්ලග්)

4. පිහිටුවීම සහ ස්ථාපනය

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. සවි කිරීම Ampජීවිතාරක්ෂකයා

1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
2. Mark the positions for the mounting screws on the wall or surface.
3. Drill pilot holes if necessary and insert wall plugs.
4. සුරක්ෂිත කරන්න ampසුදුසු ඉස්කුරුප්පු භාවිතා කරමින් ලිෆයර්.

4.2. Connecting Signals

ද amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 ampජීවිතාරක්ෂකයා.

1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
2. SAT Input: Connect your satellite dish signal cable to the designated SAT input.
3. ප්‍රතිදානය: හි ප්‍රතිදානය සම්බන්ධ කරන්න amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. බල සම්බන්ධතාවය

බල කේබලය වෙත සම්බන්ධ කරන්න amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

රූපය 3: ඉදිරිපස view of the Televes 5363 Multiband Amplifier, showing the power input.

5. මෙහෙයුම

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

ද amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. ගැලපීම ලබා ගන්න

ද amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. නඩත්තු කිරීම

To ensure optimal performance and longevity of your Televes 5363 Multiband Amplifier, මෙම සරල නඩත්තු මාර්ගෝපදේශ අනුගමනය කරන්න:

• පිරිසිදු කිරීම: බාහිර පෙනුම වරින් වර පිරිසිදු කරන්න amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• වාතාශ්රය: අධික උනුසුම් වීම වැළැක්වීම සඳහා වාතාශ්‍රය සිදුරු දූවිලි හා බාධා වලින් තොර බවට වග බලා ගන්න.
• සම්බන්ධතා: Occasionally check all cable connections to ensure they are secure and free from corrosion.
• පරිසරය: තබා ගන්න amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.

7. දෝශ නිරාකරණය

If you encounter issues with your Televes 5363 Multiband Amplifier, පහත දැක්වෙන පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

• සංඥා නැත:
  • Check all cable connections to ensure they are properly seated.
  • බව තහවුරු කරන්න amplifier is receiving power (check power indicator light if available).
  • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
• Weak or Poor Quality Signal:
  • Check the quality of the input signals before they reach the ampජීවිතාරක්ෂකයා.
  • Ensure all connections are tight and free from damage or corrosion.
  • බව තහවුරු කරන්න amplifier's gain settings (if adjustable) are appropriate for your installation.
• බලය නැත:
  • Check the power cable connection to both the ampලයිෆයර් සහ විදුලි අලෙවිසැල.
  • Test the electrical outlet with another device to ensure it is functional.

මෙම විසඳුම් උත්සාහ කිරීමෙන් පසුවද ගැටලුව පවතින්නේ නම්, සුදුසුකම් ලත් තාක්ෂණික සහාය අමතන්න.

8. තාක්ෂණික පිරිවිතර

9. වගකීම් සහ සහාය

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes webඅඩවිය.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes webඅඩවිය.