Eiko H1155 H11 Series Halogen Replacement Bulb Instruction Manual

හැඳින්වීම

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

ආරක්ෂිත තොරතුරු

• අවවාදයයි: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• අවවාදය: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before handling.
• අවවාදය: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• අවවාදයයි: දේශීය රෙගුලාසි වලට අනුව පැරණි බල්බ වගකීමෙන් යුතුව බැහැර කරන්න.

නිෂ්පාදනය අවසන්view

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

රූපය 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

සැකසුම සහ ස්ථාපනය

1. සකස් කිරීම: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. බල්බයට ප්‍රවේශ වන්න: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. රැහැන් විසන්ධි කරන්න: පැරණි බල්බයේ පිටුපස ඇති විදුලි සම්බන්ධකය ප්‍රවේශමෙන් විසන්ධි කරන්න.
4. පැරණි බල්බය ඉවත් කරන්න: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. නව බල්බයක් සවි කරන්න: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
6. රැහැන් නැවත සම්බන්ධ කරන්න: විදුලි සම්බන්ධකය නව බල්බයට නැවත සම්බන්ධ කරන්න.
7. පරීක්ෂණ ක්‍රියාකාරීත්වය: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. නැවත එකලස් කරන්න: Reinstall any covers or components that were removed to access the bulb.

සටහන: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

මෙහෙයුම

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• පරීක්ෂාව: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• හැසිරවීම: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting