SINGER Simple 2263 23-Stitch Sewing Machine

හැඳින්වීම

This manual provides essential information for the proper setup, operation, and maintenance of your SINGER Simple 2263 23-Stitch Sewing Machine. Designed for ease of use, this machine offers foundational features for various sewing projects. Please read these instructions carefully before using the machine to ensure safe and efficient operation.

Figure 1: SINGER Simple 2263 23-Stitch Sewing Machine. This image displays the full sewing machine with its main components visible, including the stitch selector, tension dial, and needle area.

වැදගත් ආරක්ෂක උපදෙස්

• Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning, removing covers, or performing any user servicing.
• Do not allow the machine to be used as a toy. Close attention is necessary when the machine is used by or near children.
• Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
• මෙම මහන මැෂිමට හානියට පත් ලණුවක් හෝ ප්ලග් එකක් තිබේ නම්, එය නිසි ලෙස ක්‍රියා නොකරන්නේ නම්, එය වැටී හෝ හානි වී ඇත්නම් හෝ ජලයට වැටී ඇත්නම් එය කිසි විටෙකත් ක්‍රියාත්මක නොකරන්න.
• චලනය වන සියලුම කොටස් වලින් ඇඟිලි away ත් කර තබන්න. මහන මැෂින් ඉඳිකටුවක් වටා විශේෂ සැලකිල්ලක් අවශ්ය වේ.
• සෑම විටම සුදුසු ඉඳිකටු තහඩුව භාවිතා කරන්න. වැරදි තහඩුව නිසා ඉඳිකටුවක් කැඩී යා හැක.
• මැහුම් කරන අතරතුර රෙදි අදින්න හෝ තල්ලු කරන්න එපා. මෙය ඉඳිකටුව ඉවතට හරවා එය කැඩී යාමට හේතු විය හැක.
• යන්ත්‍රය ක්‍රියාත්මක කිරීමේදී ආරක්ෂිත කණ්නාඩි පළඳින්න.

පෙට්ටියේ ඇති දේ

ඇසුරුම් ඉවත් කිරීමෙන් පසු, කරුණාකර පහත අයිතම සියල්ල ඇතුළත් කර ඇති බවට වග බලා ගන්න:

• උපදෙස් අත්පොත
• ඉක්මන් ආරම්භක මාර්ගෝපදේශය
• ඩාර්නිං තහඩුව
• Thread Spool Cap Holders (2)
• ඉස්කුරුප්පු නියනක්
• සියලු අරමුණු පාදය
• බොත්තම් සිදුරු පාදය
• බොත්තම් මැහුම් පාදය
• බොබින්ස් (3)
• ඉඳිකටු (3)
• Lint Brush/Seam Ripper
• Power cord/Foot Control

Figure 2: Included Accessories. This image displays various accessories that come with the sewing machine, including bobbins, needles, different presser feet, and a seam ripper.

සැලසුම

1. බල සම්බන්ධතාවය

Connect the power cord to the machine and then to a 110-volt electrical outlet. Ensure the foot control is also connected to the machine.

2. යන්ත්‍රයට නූල් දැමීම

Proper threading is crucial for optimal stitch quality. Follow these steps:

1. Place a spool of thread onto the spool pin. Ensure the thread unwinds smoothly.

Figure 3: Spool Pin. This image shows a close-up of the spool pin located at the top of the machine, where the thread spool is placed.

2. Guide the thread through the upper thread guides and tension discs as indicated by the numbered path on the machine.
3. Thread the needle from front to back. The automatic needle threader can assist with this step.

Figure 4: Needle Area. This image provides a close-up view of the needle and presser foot area, highlighting the automatic needle threader mechanism.

3. Winding and Inserting the Bobbin

Refer to the Quick Start Guide for detailed instructions on winding the bobbin and correctly inserting it into the bobbin case.

මෙහෙයුම් උපදෙස්

1. මැහුම් තේරීම

Turn the stitch selector dial to choose from the 23 available stitch patterns. Ensure the needle is in its highest position before changing stitches.

2. මැහුම් දිග සහ පළල සකස් කිරීම.

Use the length and width dials to fine-tune your chosen stitch. Experiment with different settings on scrap fabric to achieve the desired result.

3. Using the Presser Foot Lifter

The extra-high presser foot lifter allows for easy placement and removal of multiple layers of fabric or bulky materials under the presser foot.

4. Sewing a Buttonhole

Attach the buttonhole foot. Follow the markings on the foot and the machine's instructions for a four-step buttonhole process.

Figure 5: Buttonhole Stitching. This image shows the buttonhole presser foot attached to the machine, actively stitching a buttonhole on a piece of blue fabric.

නඩත්තු කිරීම

1. යන්ත්රය පිරිසිදු කිරීම

Regular cleaning helps maintain machine performance. Use the provided lint brush to remove lint and dust from the bobbin area and feed dogs. Always unplug the machine before cleaning.

2. ඉඳිකටු ආදේශ කිරීම

Replace the needle regularly, especially if it becomes bent, dull, or if you notice skipped stitches. Use the screwdriver to loosen the needle clamp screw, insert a new needle with the flat side facing the back, and tighten the screw.

දෝෂගවේෂණය

If you encounter issues, review පහත දැක්වෙන පොදු ගැටළු සහ විසඳුම්:

• මඟ හැරුණු මැහුම්: Check if the needle is bent or dull, replace if necessary. Ensure the needle is inserted correctly. Verify the machine is threaded properly.
• නූල් කැඩීම: Check for correct threading, proper thread tension, and ensure the needle is not bent or too small for the thread.
• රෙදි විවීම: Adjust thread tension, use a finer needle, or consider using a stabilizer for delicate fabrics.
• යන්ත්‍රය ආරම්භ නොවේ: Ensure the power cord and foot control are securely plugged in. Check the power switch.

For more complex issues, consult the full instruction manual or contact SINGER customer support.

පිරිවිතර

වගකීම් සහ සහාය

This sewing machine is warranted for use in the US and Canada at 110 volts only. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official SINGER webඅඩවිය.

For technical support, replacement parts, or further assistance, please contact SINGER customer service through their official channels.