ටෙස්ටෝ 0560 8312 830-T1 IR උෂ්ණත්වමාන උපදෙස් අත්පොත

1. හැඳින්වීම

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2 ආරක්ෂිත තොරතුරු

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• පුපුරන සුලු වායුගෝලයේ උපාංගය භාවිතා නොකරන්න.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• උපාංගය පිරිසිදුව හා වියලි ලෙස තබා ගන්න.
• මෙම අත්පොතෙහි විස්තර කර ඇති පරිදි උපාංගය එහි අපේක්ෂිත අරමුණ සඳහා පමණක් භාවිතා කරන්න.
• අළුත්වැඩියා කිරීම බලයලත් පුද්ගලයින් විසින් පමණක් සිදු කළ යුතුය.

3. නිෂ්පාදන අවසන්view

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

රූපය 2: ඉදිරිපස view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 සංරචක

• අධෝරක්ත සංවේදකය: Located at the front of the device, used for non-contact temperature measurement.
• ද්විත්ව ලේසර් පොයින්ටර්ස්: Two laser dots indicate the measurement spot size.
• සංදර්ශකය: Shows temperature readings, measurement units, battery status, and other indicators.
• මිනුම් ප්‍රේරකය: මිනුම් සහ ලේසර් සක්‍රීය කරයි.
• පාලන බොත්තම්: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• බැටරි මැදිරිය: Located in the handle for battery installation.

4. පිහිටුවීම

4.1 බැටරි ස්ථාපනය

1. උෂ්ණත්වමානයේ හසුරුව මත බැටරි මැදිරි කවරය සොයා ගන්න.
2. කවරය විවෘත කරන්න.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

4.2 Initial Power-On and Unit Selection

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. මෙහෙයුම් උපදෙස්

5.1 මිනුමක් ගැනීම

1. Point the infrared sensor towards the target object.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. උෂ්ණත්ව කියවීම් සංදර්ශකය මත දිස්වනු ඇත.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 MIN/MAX ශ්‍රිතය

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Emissivity Adjustment

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. නඩත්තු කිරීම

6.1 පිරිසිදු කිරීම

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 බැටරි ප්රතිස්ථාපනය

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 ගබඩා කිරීම

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. දෝශ නිරාකරණය

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• උපාංගය ක්‍රියාත්මක නොවේ:
  • Check if batteries are correctly inserted with proper polarity.
  • බැටරි නව ඒවා සමඟ ප්රතිස්ථාපනය කරන්න.
• වැරදි කියවීම්:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • Avoid measuring through glass or highly reflective surfaces.
• ලේසර් නොපෙනේ:
  • බැටරි මට්ටම පරීක්ෂා කරන්න.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webඅඩවිය.

නිෂ්පාදකයා: Testo SE & Co.

වගකීම් හිමිකම් සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.