Elinchrom D-Lite RX 4 400ws Studio Flash Monolight Instruction Manual

1. හැඳින්වීම

The Elinchrom D-Lite RX 4 is a lightweight, portable studio flash monolight designed for professional photography. This unit features auto-sensing multi-voltage operation, accommodating AC power sources from 90-260VAC. It offers precise power variability over 5.0 stops in 1/10 stop increments, ensuring accurate light control. The D-Lite RX 4 provides fast recycling times and short flash durations, making it suitable for capturing dynamic subjects. This manual provides essential information for the safe and effective use of your Elinchrom D-Lite RX 4.

2. ආරක්ෂිත උපදෙස්

• Always disconnect the unit from the power supply before cleaning or performing any maintenance.
• ඒකකය වර්ෂාව, තෙතමනය හෝ අධික උෂ්ණත්වයන්ට නිරාවරණය නොකරන්න.
• අධික උනුසුම් වීම වැළැක්වීම සඳහා ක්‍රියාත්මක වන අතරතුර ඒකකය වටා නිසි වාතාශ්‍රය සහතික කරන්න.
• ෆ්ලෑෂ් ටියුබ් එක ඇස්වලට සෘජුවම නිරාවරණය වීමෙන් වළකින්න, මන්ද එය තාවකාලික පෙනීමේ දුර්වලතාවයක් ඇති කළ හැකිය.
• Use only Elinchrom approved accessories and replacement parts.
• The included 120V 100W modeling lamp must be replaced with a 230V compatible lamp when operating the unit in 230V electrical environments.

3. පැකේජ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• Elinchrom D-Lite RX 4 Flash Head
• Power cord (U.S. plug)
• සමමුහුර්ත ලණුව
• ෆ්ලෑෂ් ටියුබ්
• ආරක්ෂිත තොප්පිය
• 120V 100W Modeling lamp (පෙර-ස්ථාපිත හෝ වෙනම)
• Built-in EL-Skyport Receiver

4. සංරචක අවසන්view

Familiarize yourself with the main components of the Elinchrom D-Lite RX 4:

රූපය 4.1: ප්රධාන view of the Elinchrom D-Lite RX 4 flash head with the modeling lamp installed, showing the front and side profile.

රූපය 4.2: පැත්ත view of the Elinchrom D-Lite RX 4 flash head, highlighting the compact design and handle.

රූපය 4.3: ඉදිරිපස view of the Elinchrom D-Lite RX 4 flash head with the protective cap in place, demonstrating its readiness for transport or storage.

Figure 4.4: Close-up of the Elinchrom brand name embossed on the top handle of the flash unit, indicating the manufacturer.

රූපය 4.5: සවිස්තරාත්මක view of the mounting bracket and adjustment knob on the Elinchrom D-Lite RX 4, showing how it attaches to a light stand and allows for angle adjustments.

5. පිහිටුවීම

5.1 Mounting the Flash Head

1. Securely attach the D-Lite RX 4 to a compatible light stand using the integrated mounting bracket.
2. Adjust the angle of the flash head as needed and tighten the adjustment knob to lock it in position.

5.2 බල සම්බන්ධතාවය

1. Ensure the flash unit is switched off before connecting to power.
2. Connect the provided power cord to the unit and then to a suitable AC power outlet. The D-Lite RX 4 is auto-sensing and compatible with 90-260VAC.
3. වැදගත්: If operating in a 230V electrical environment, the pre-installed 120V 100W modeling lamp must be replaced with a 230V compatible modeling lamp හානි වැළැක්වීම සඳහා.

5.3 ආලෝක විකරණකාරක සවි කිරීම

The D-Lite RX 4 features a bayonet mount compatible with all Elinchrom accessories and softboxes up to 53 inches (135 cm). To attach a modifier, align it with the bayonet mount and twist until it locks securely.

6. මෙහෙයුම

6.1 බල ගැන්වීම සක්‍රිය / අක්‍රිය කිරීම

Locate the power switch on the unit and toggle it to the 'ON' position to power on the flash. Toggle to 'OFF' to power down.

6.2 Adjusting Flash Power

Use the control dial or buttons on the unit to adjust the flash power. The D-Lite RX 4 allows for power adjustments over 5.0 stops in precise 1/10 stop increments.

6.3 ආකෘති නිර්මාණය එල්amp පාලනය කරන්න

ආකෘති නිර්මාණය එල්amp can be controlled independently. Refer to the unit's display or controls for options such as proportional, full, or off settings for the modeling light.

6.4 Triggering the Flash

The D-Lite RX 4 can be triggered in several ways:

• සමමුහුර්ත ලණුව: Connect a standard sync cord from your camera to the flash unit's sync port.
• Built-in EL-Skyport Receiver: Utilize the integrated EL-Skyport receiver for wireless triggering.

7. EL-Skyport System

The Elinchrom D-Lite RX 4 features a built-in EL-Skyport Receiver, enabling wireless control and triggering. This receiver supports eight frequency channels and can manage up to four distinct groups of flashes.

7.1 Using the EL-Skyport Transmitter (Optional)

For full wireless control, a separate EL-Skyport ELS Speed Transmitter (sold separately) is required. This transmitter allows you to:

• Trigger your flash from distances up to 393 feet (120 meters).
• Control flash power on/off.
• Adjust modeling light functions.
• Activate Speed Sync for faster shutter speeds.

7.2 Software and App Control

Free software is available for Mac and PC computers, providing additional features such as Flash-Delay for creating strobing effects. An optional Wi-Fi module for the transmitter allows for full remote control via specially designed apps for iPhone, iPad, or iPod Touch devices.

8 ගැළපෙන උපාංග

The Elinchrom D-Lite RX 4's bayonet mount is designed to be compatible with a wide range of Elinchrom light shapers and accessories, including softboxes up to 53 inches (135 cm) in diameter. Using genuine Elinchrom accessories ensures optimal performance and compatibility.

9. නඩත්තු කිරීම

9.1 පිරිසිදු කිරීම

Ensure the unit is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior of the flash head. Do not use abrasive cleaners or solvents. For the flash tube and modeling lamp, use a clean, lint-free cloth, avoiding direct contact with bare hands to prevent oil residue.

9.2 Flash Tube Replacement

Flash tubes have a limited lifespan. When replacement is necessary, ensure the unit is unplugged and cooled down. Carefully remove the old flash tube and install a new, compatible Elinchrom flash tube, following the instructions provided with the replacement part.

10. දෝශ නිරාකරණය

• ෆ්ලෑෂ් නොදැල්වීම: Check power connection, ensure the unit is switched on, verify sync cord connection or Skyport transmitter settings.
• Slow recycling: Ensure the unit is connected to a stable power source. Extremely low power settings may result in faster recycling, while full power requires more time.
• ආකෘතිකරණය එල්amp වැඩ කරන්නේ නැහැ: ආකෘති නිර්මාණය l දැයි පරීක්ෂා කරන්නamp is securely seated and not burnt out. Verify modeling lamp settings on the unit.
• අධික උනුසුම් වීම: Ensure adequate ventilation around the unit. If the unit feels excessively hot, power it off and allow it to cool down before resuming operation.

11. පිරිවිතර

12. වගකීම් සහ සහාය

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Elinchrom webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.