JVC QAN0067-003 Microphone Instruction Manual

1. හැඳින්වීම

This manual provides essential information for the proper setup, operation, and maintenance of your JVC QAN0067-003 Microphone. This microphone is designed to capture high-quality audio for video and broadcast productions when used with compatible JVC ProHD and 4KCAM camcorders. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image 1.1: JVC QAN0067-003 Microphone with foam windscreen attached.

The JVC QAN0067-003 is a shotgun microphone, characterized by its directional pickup pattern, which helps to isolate sound from the direction the microphone is pointed while reducing ambient noise. It requires 48V phantom power for operation and connects via a hardwired cable with an XLR output connector. A foam windscreen is included to minimize wind noise during outdoor recordings.

2. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

• JVC QAN0067-003 Microphone (with hardwired XLR cable)
• ෆෝම් වින්ඩ්ස්ක්‍රීන්

3. පිහිටුවීම

3.1 වින්ඩ්ස්ක්‍රීන් සවි කිරීම

1. Gently slide the foam windscreen over the microphone head.
2. Ensure the windscreen is fully seated and covers the microphone capsule to provide effective wind noise reduction.

3.2 Connecting to a Camcorder

1. Locate the XLR input port on your compatible JVC ProHD or 4KCAM camcorder. This port is typically labeled "MIC IN" or similar.
2. Connect the XLR output connector of the JVC QAN0067-003 Microphone's hardwired cable to the camcorder's XLR input. Ensure a secure connection.
3. Verify that your camcorder's audio input settings are configured to provide 48V phantom power to the XLR input. The JVC QAN0067-003 Microphone requires 48V phantom power to operate. Refer to your camcorder's instruction manual for specific instructions on enabling phantom power.
4. Mount the microphone securely to your camcorder using an appropriate microphone mount or hot shoe adapter (not included).

4. මෙහෙයුම් උපදෙස්

4.1 ශ්‍රව්‍ය නිරීක්ෂණය

Always monitor the audio output through headphones connected to your camcorder while recording. This allows you to identify and correct any audio issues, such as distortion, low levels, or unwanted noise, in real-time.

4.2 මයික්‍රෆෝන ස්ථානගත කිරීම

Due to its directional (unidirectional) polar pattern, the JVC QAN0067-003 Microphone is most effective when pointed directly at the sound source. Experiment with microphone placement to achieve the desired sound pickup and minimize off-axis noise. For dialogue, position the microphone as close as possible to the speaker without entering the camera's frame.

4.3 ලාභ සැකසුම්

Adjust the audio input gain on your camcorder to achieve optimal recording levels. Aim for levels that are strong enough to be clear but do not peak into the red zone, which indicates clipping and distortion. Refer to your camcorder's manual for detailed instructions on adjusting audio gain.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

• Use a soft, dry cloth to clean the exterior of the microphone.
• Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the microphone's finish or internal components.
• The foam windscreen can be gently hand-washed with mild soap and water, then allowed to air dry completely before reattaching.

5.2 ගබඩා කිරීම

When not in use, store the microphone in a dry, dust-free environment, preferably in its original packaging or a protective case. Avoid exposing the microphone to extreme temperatures, high humidity, or direct sunlight.

6. දෝශ නිරාකරණය

6.1 ශ්‍රව්‍ය ප්‍රතිදානයක් නොමැත

• ෆැන්ටම් බලය පරීක්ෂා කරන්න: Ensure that 48V phantom power is enabled on your camcorder's XLR input. The microphone will not function without it.
• කේබල් සම්බන්ධතාවය: Verify that the XLR cable is securely connected to both the microphone and the camcorder.
• Camcorder Settings: Confirm that the correct audio input (XLR/MIC) is selected on your camcorder and that the input gain is not set to minimum.

6.2 Poor Audio Quality (Noise, Distortion)

• ලබා ගැනීමේ මට්ටම්: If audio is distorted, reduce the input gain on your camcorder. If audio is too low, increase the gain.
• වින්ඩ්ස්ක්‍රීන්: Ensure the foam windscreen is properly installed, especially in windy conditions.
• බාධා කිරීම්: Keep the microphone away from sources of electromagnetic interference, such as mobile phones, Wi-Fi routers, or power cables.
• කේබල් අඛණ්ඩතාව: Inspect the XLR cable for any signs of damage. A faulty cable can cause noise or intermittent audio.

6.3 Microphone Loose on Mount

• Tighten Mount: Ensure that the microphone mount (if applicable) is securely fastened to the camcorder and that the microphone is firmly seated within the mount.

If you continue to experience issues, consult your camcorder's manual or contact JVC customer support.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact your retailer. For technical support or further assistance, please visit the official JVC website or contact JVC customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

ඔබට වැඩිදුර තොරතුරු සහ සහාය සම්පත් සොයා ගත හැක JVC වෙළඳසැල.