පිකෝ 35267

PIKO G Scale Reed Switch Assembly (Model 35267) Instruction Manual

Manufacturer: PIKO

හැඳින්වීම

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your PIKO G Scale Reed Switch Assembly, Model 35267. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

සැකසුම සහ ස්ථාපනය

The PIKO G Scale Reed Switch Assembly (35267) is designed for use with G scale model train layouts to detect the presence of a train. It typically works by sensing a magnet attached to the underside of a locomotive or rolling stock.

සංරචක:

ස්ථාපන පියවර:

  1. ස්ථානගත කිරීම හඳුනා ගන්න: Determine the desired location on your G scale track where train detection is required. This could be for signaling, automated accessories, or track occupancy indication.
  2. Mount the Reed Switch: Securely attach the reed switch assembly to the track bed or adjacent to the track. Ensure the switch is positioned so that a magnet on the train will pass directly over or very close to it. The exact mounting method may vary based on your layout and the specific design of the assembly.
  3. රැහැන් සම්බන්ධ කරන්න: Connect the reed switch to your control system, signal, or accessory. Refer to the wiring diagram of your specific control unit for correct connections. Reed switches typically have two wires and act as a simple open/close contact.
  4. පරීක්ෂණ ක්‍රියාකාරීත්වය: Place a locomotive or car with a magnet over the installed reed switch. Verify that the connected accessory or signal responds as expected. Adjust the position of the reed switch or magnet if necessary to achieve reliable detection.
PIKO G Scale Reed Switch Assembly 35267

Image: PIKO G Scale Reed Switch Assembly (Model 35267). This image shows the general appearance of the reed switch assembly, which is used to detect the presence of G scale model trains on a track.

මෙහෙයුම් උපදෙස්

The PIKO G Scale Reed Switch Assembly operates passively, meaning it does not require external power to function as a switch. It is activated by a magnetic field.

Ensure that the magnets on your rolling stock are strong enough and positioned correctly to reliably trigger the reed switch.

නඩත්තු කිරීම

The PIKO G Scale Reed Switch Assembly is designed for durability and requires minimal maintenance.

දෝෂගවේෂණය

If your reed switch assembly is not functioning as expected, consider the following:

ගැටලුව විය හැකි හේතුව විසඳුම
Switch does not activate.
  • Magnet on train is too weak or improperly positioned.
  • Reed switch is too far from the magnet.
  • Wiring connection is loose or incorrect.
  • Reed switch is faulty.
  • Ensure a strong magnet is attached to the train, directly above the switch.
  • Adjust the reed switch position closer to the track/magnet.
  • Check all wiring connections for security and correctness.
  • Test the reed switch with a separate magnet; if it still doesn't activate, it may need replacement.
Switch activates erratically.
  • Interference from other magnetic sources.
  • Loose mounting, causing vibration.
  • Weak or inconsistent magnet on train.
  • Ensure no other strong magnets are nearby.
  • Securely mount the reed switch to prevent movement.
  • Replace or reinforce the train magnet.

පිරිවිතර

වගකීම් සහ සහාය

For specific warranty information, please refer to the documentation provided with your purchase or contact your retailer. PIKO products are generally covered by a manufacturer's warranty against defects in materials and workmanship.

For technical support or further assistance, please contact PIKO customer service or your authorized PIKO dealer. Contact details can typically be found on the official PIKO webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය.

අදාළ ලියකියවිලි - 35267

පෙරview PIKO G ඩිජිටල් පද්ධතිය: ඉවරයිview සහ G-පරිමාණ ආකෘති දුම්රිය සඳහා සංරචක
Explore the PIKO G Digital System, a comprehensive solution for advanced G-Scale model train operation. Learn about the Digital Central Station, Boosters, Switch Decoders, Navigator Remote, and more for both tethered and wireless control.
පෙරview PIKO විදුලි දුම්රිය එන්ජිම Rh 1000 NS: උපදෙස් අත්පොත සහ අමතර කොටස් (#97504)
PIKO HO පරිමාණයේ විදුලි දුම්රිය එන්ජිම Rh 1000 NS (ආකෘතිය #97504) සඳහා සවිස්තර උපදෙස්, එකලස් කිරීම, විසුරුවා හැරීම, විකේතකය සහ ශබ්ද ස්ථාපනය ඇතුළුව, සහ සවිස්තරාත්මක අමතර කොටස් ලැයිස්තුවක්.
පෙරview විදුලි දුම්රිය එන්ජිමක් සඳහා PIKO SmartDecoder XP Sound Next18 BR 243 TT - බහු ප්‍රොටෝකෝල් ශබ්ද විකේතකය
TT පරිමාණ විදුලි දුම්රිය එන්ජින් සඳහා බහු ප්‍රොටෝකෝල ශබ්ද විකේතකයක් වන PIKO SmartDecoder XP Sound Next18 හි සවිස්තරාත්මක පිරිවිතර සහ විශේෂාංග, උසස් ශබ්දය, මෝටර් පාලනය සහ ඩිජිටල් පද්ධති අනුකූලතාව ලබා දෙයි.
පෙරview PIKO 76790 බහු ප්‍රොටෝකෝල විකේතක ස්ථාපනය සහ මෙහෙයුම් මාර්ගෝපදේශය
PIKO 76790 බහු ප්‍රොටොකෝල් විකේතකය ස්ථාපනය කිරීම, ක්‍රමලේඛනය කිරීම සහ ක්‍රියාත්මක කිරීම සඳහා පුළුල් මාර්ගෝපදේශයක්. DCC සහ Motorola අනුකූලතාව, බර නියාමනය, පිකප් සපත්තු මාරු කිරීම සහ ආකෘති දුම්රිය ලෝලීන් සඳහා තාක්ෂණික පිරිවිතර ගැන ඉගෙන ගන්න.
පෙරview PIKO SmartControlwlan ඩිජිටල් විධාන පාලන පද්ධතිය - හිමිකරුගේ අත්පොත
PIKO SmartControlwlan DCC පද්ධතිය සඳහා සවිස්තරාත්මක හිමිකරුගේ අත්පොත, ආකෘති දුම්රිය මාර්ග ලෝලීන් සඳහා සැකසුම, ක්‍රියාකාරිත්වය, දුම්රිය එන්ජින් සහ උපාංග පාලනය, මාර්ග ක්‍රමලේඛනය සහ සැකසුම් විස්තර කරයි. මෙම පරිශීලක-හිතකාමී පද්ධතිය සමඟ දුම්රිය, ස්විච, සංඥා සහ වැඩසටහන් CV පාලනය කිරීමට ඉගෙන ගන්න.
පෙරview PIKO RH S489.0 TT විදුලි දුම්රිය එන්ජිමක ආකෘතිය: උපදෙස් සහ අමතර කොටස්
PIKO RH S489.0 TT විදුලි දුම්රිය එන්ජිමේ ආකෘතිය සඳහා සවිස්තරාත්මක මාර්ගෝපදේශය, සවිස්තරාත්මක උපදෙස්, තාක්ෂණික පිරිවිතර, ක්‍රියාකාරී පැවරුම් සහ සම්පූර්ණ අමතර කොටස් ලැයිස්තුවක් ඇතුළත් වේ. PIKO SmartDecoder XP Sound Next18 පිළිබඳ තොරතුරු ඇතුළත් වේ.