Linear 212LS-C26DCR-RT

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset User Manual

Model: 212LS-C26DCR-RT

1. හැඳින්වීම

This manual provides instructions for the installation, operation, and maintenance of the Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset. This lockset is designed for secure access control in both commercial and residential environments.

ප්රධාන ලක්ෂණ:

  • Durable construction for extended lifespan.
  • Clutch lever design for enhanced security.
  • Long battery life (up to 15,000 keypad activations) with low-battery alert.
  • Password retention during battery removal.
  • Easy installation into standard cylindrical door preps (ANSI 151.8).
  • Master password control system for managing up to 120 user passwords.
  • Mechanical key override for emergency situations.

2 ආරක්ෂිත තොරතුරු

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

  • Ensure proper battery polarity when installing batteries.
  • Do not expose the lockset to extreme temperatures or moisture beyond its intended operating conditions.
  • Keep mechanical keys in a secure location, separate from the lockset.
  • Do not attempt to disassemble or repair the lockset yourself. Refer to qualified personnel for service.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම අයිතම පවතින බව තහවුරු කරගන්න:

  • Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset
  • දෘඪාංග සවිකිරීම
  • 2 Mechanical keys
  • පරිශීලක අත්පොත (මෙම ලේඛනය)

Note: Four AA 1.5 volt batteries are required and are not included in the package.

4. ස්ථාපනය

The lockset is designed for easy installation into a standard cylindrical door preparation (ANSI 151.8).

4.1. දොර සූදානම් කරන්න

Ensure your door has a standard cylindrical door prep. If not, consult a professional for proper door preparation.

4.2. Install the Lockset

  1. Follow the detailed instructions provided with the mounting hardware to secure the lockset components to the door.
  2. Ensure all cables are properly connected and routed to avoid pinching.

4.3. බැටරි ස්ථාපනය කරන්න

  1. Locate the battery compartment, typically on the interior side of the lockset.
  2. Insert four (4) AA 1.5 volt batteries, ensuring correct polarity.
  3. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset, Right Hand OpeningFigure 1: Linear 212LS-C26DCR-RT Lockset showing keypad and lever handle.

5. මෙහෙයුම

The lockset operates using a keypad for electronic access or mechanical keys for override.

5.1. Initial Setup and Master Password

Upon initial power-up, you will need to set a master password. Refer to the specific programming instructions included with your lockset for this procedure. The master password allows for the management of up to 120 individual user passwords.

5.2. Adding User Passwords

Using the master password, you can add or delete up to 120 unique user passwords. Each user password grants access through the keypad.

5.3. Keypad Entry

  1. Enter a valid user password on the keypad.
  2. The lock will disengage, allowing the handle to operate.
  3. If an incorrect code is entered, the handle will not mechanically engage the cylinder, preventing unauthorized entry.

5.4. යාන්ත්‍රික යතුරු අභිබවා යාම

In emergency situations or if batteries are depleted, the provided mechanical keys can be used to unlock the door. Insert the key into the keyway and turn to unlock.

6. නඩත්තු කිරීම

6.1. බැටරි ප්රතිස්ථාපනය

The lockset is designed for approximately 15,000 keypad activations, which translates to about 5 years of usage based on 10 activations per day. A low-battery alert will indicate when batteries need replacement. Replace all four AA batteries simultaneously with new, high-quality alkaline batteries.

6.2 පිරිසිදු කිරීම

Clean the lockset exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.

7. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
Handle does not engage after entering correct code.Low batteries or mechanical issue.Replace batteries. If problem persists, use mechanical key and contact support.
යතුරු පෑඩය ප්‍රතිචාර නොදක්වයි.Dead batteries or internal electronic fault.Replace batteries. If still unresponsive, use mechanical key and contact support.
Cannot add or delete user passwords.Incorrect master password or programming error.Verify master password. Refer to programming instructions for correct procedure.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකය212LS-C26DCR-RT
මානයන් (L x W x H)අඟල් 10.1 x 8.5 x 7.4
බරපවුම් 5.5ක්
බලශක්ති ප්රභවය4 AA 1.5V batteries (not included)
බැටරි ආයු කාලයApprox. 15,000 activations
අගුළු වර්ගයයතුරු පුවරුව
විශේෂ ලක්ෂණයවතුර කාන්දු නොවන
ද්රව්යලෝහ

9. වගකීම් සහ සහාය

This product typically comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Linear customer service. Contact information can usually be found on the manufacturer's webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය මත.

Note: The warranty period for this product is generally 24 months, primarily for wholesale purchasers. Please confirm your specific warranty coverage.

අදාළ ලියකියවිලි - 212LS-C26DCR-RT

පෙරview Linear AK-11 Digital Keyless Entry System Installation and Programming Manual
The Linear AK-11 is a robust digital keyless entry system designed for access control applications. It features a durable cast aluminum enclosure, supports up to 480 programmable entry codes (1-6 digits), and offers multiple output options including two relays and two solid-state outputs. This system is ideal for controlling access to doors and gates, providing features like anti-passback, keypad lockout, and various input functionalities for enhanced security and convenience.
පෙරview රේඛීය AK-11 ඩිජිටල් යතුරු රහිත ඇතුල්වීමේ පද්ධති ස්ථාපනය සහ ක්‍රමලේඛන උපදෙස්
රේඛීය AK-11 ඩිජිටල් යතුරු රහිත ප්‍රවේශ පද්ධතිය ස්ථාපනය කිරීම සහ ක්‍රමලේඛනය කිරීම සඳහා වූ පුළුල් මාර්ගෝපදේශය, විශේෂාංග, පිරිවිතර, රැහැන් ඇදීම, සැකසුම, ක්‍රියාකාරිත්වය සහ දෝශ නිරාකරණය ආවරණය කරයි.
පෙරview Linear Entry Pro Series ස්ථාපන අත්පොත: දෘඪාංග සහ පද්ධති සැකසුම
This manual provides comprehensive installation, wiring, and configuration guidance for the Linear Entry Pro Series Telephone Entry and Access Control Systems (EP-4xx, EP-7xx). It details hardware features, component locations, system diagnostics, troubleshooting, and specifications for secure access management.
පෙරview රේඛීය ප්‍රවේශ යතුර AK-1 ඩිජිටල් යතුරු පෑඩ් ඇතුළත් කිරීමේ පද්ධතිය - තාක්ෂණික පිරිවිතර සහ විශේෂාංග
වාණිජ ප්‍රවේශ පාලනය සඳහා ඩිජිටල් යතුරු පෑඩ් ඇතුළත් කිරීමේ පද්ධතියක් වන Linear AccessKey AK-1 පිළිබඳ සවිස්තර තොරතුරු, රළු නිර්මාණය, බහු ප්‍රතිදාන සහ වැඩසටහන්ගත කළ හැකි PIN කේත ඇතුළත් වේ.
පෙරview රේඛීය රැහැන් රහිත ප්‍රවේශ පද්ධති: යතුරු පෑඩ් සහ පාලක
නේවාසික, වාණිජ සහ කාර්මික යෙදුම්වල ආරක්ෂිත ප්‍රවේශ පාලනය සඳහා MDKP යතුරු පෑඩ්, AP-5 පාලක සහ විවිධ AK-ශ්‍රේණි යතුරු පෑඩ් ඇතුළුව Linear හි රැහැන් රහිත ප්‍රවේශ පද්ධති පරාසය ගවේෂණය කරන්න.
පෙරview රේඛීය AM/II රැහැන් රහිත ප්‍රවේශ පාලන පද්ධතිය: ස්ථාපනය සහ ක්‍රමලේඛන මාර්ගෝපදේශය
රේඛීය AM/II රැහැන් රහිත ප්‍රවේශ පාලන පද්ධතිය සඳහා සවිස්තරාත්මක ස්ථාපන සහ ක්‍රමලේඛන උපදෙස්, විශේෂාංග, සැකසුම සහ ක්‍රියාකාරිත්වය ආවරණය කරයි. එහි රැහැන් රහිත හැකියාවන්, Wiegand/RS-232 අතුරුමුහුණත් සහ ජාලකරණ විකල්ප ගැන ඉගෙන ගන්න.