1. හැඳින්වීම
This manual provides detailed instructions for the setup, operation, and maintenance of your Marantec M3-2312 2-Button Garage Door Remote Control. Please read these instructions carefully before use to ensure proper functionality and safety. This remote is designed to operate Marantec garage door openers compatible with 315 MHz frequency.
2. නිෂ්පාදන අවසන්view
The Marantec M3-2312 is a compact, two-button digital remote control for Marantec garage door openers. It operates at a 315 MHz frequency and can control up to two separate Marantec garage door openers. The remote includes a visor clip for convenient storage in your vehicle.
රූපය 1: Marantec M3-2312 Remote Control and Visor Clip. The image displays the black Marantec 2-button remote control on the left and a silver metal visor clip on the right. The remote features two grey hexagonal buttons and a small LED indicator light at the top. The Marantec logo is visible at the bottom of the remote.
පැකේජයේ අන්තර්ගතය:
- Marantec M3-2312 2-Button Remote Control
- වීසර් ක්ලිප්
- 1 CR2 Battery (pre-installed)
- Programming Connector (internal)
3. සැකසුම සහ ක්රමලේඛනය
The Marantec M3-2312 remote control can be programmed using an existing, working remote or directly to your garage door opener. Ensure your garage door opener is a Marantec model operating at 315 MHz.
Method 1: Programming from an Existing Remote (Cloning)
This method requires a working Marantec remote control and a short length of wire (e.g., a paperclip or small jumper wire) to connect the programming connectors.
- Open both the existing, working remote and the new M3-2312 remote to access their internal programming connectors. These are typically small metal pins or ports.
- Using a small wire, connect the corresponding programming connectors on both remotes. Ensure a secure connection.
- මත existing, working remote, press and hold the button you wish to copy. The LED on the existing remote may illuminate.
- While still holding the button on the existing remote, press and hold the desired button on the new M3-2312 remote.
- Hold both buttons until the LED on the new M3-2312 remote flashes rapidly or changes color, indicating successful programming. This may take several seconds.
- Release both buttons and disconnect the wire.
- Test the new remote with your garage door opener. If it does not work, repeat the steps.
සටහන: If you attempt to program a second remote directly to the opener after programming the first via cloning, the opener may issue a new code, causing the first cloned remote to cease functioning. It is recommended to clone all new remotes from a single master remote if possible.
Method 2: Programming Directly to the Garage Door Opener
Refer to your specific Marantec garage door opener's instruction manual for detailed steps on how to put the opener into programming mode. Generally, this involves pressing a