BFT MITTO B RCB02 අව්‍යාජ දුරස්ථ පාලක පරිශීලක අත්පොත

1. නිෂ්පාදන අවසන්view

The BFT MITTO B RCB02 is a genuine 2-channel remote control designed for operating BFT gate and garage door automation systems. This compact and ergonomic device provides reliable control over your automated entry points. It features two distinct buttons for controlling different functions or multiple gates/doors.

රූපය 1.1: ඉදිරිපස view of the BFT MITTO B RCB02 remote control, showing its two control buttons and the BFT logo.

• ආකෘතිය: D111904
• නාලිකා: 2-නාලිකා මෙහෙයුම
• සම්බන්ධතාවය: ගුවන්විදුලි සංඛ්යාතය
• Ergonomic Design: සුවපහසු හැසිරවීම සඳහා නිර්මාණය කර ඇත.

2. සැකසුම සහ බැටරි ස්ථාපනය

2.1. බැටරි අවශ්යතා

The BFT MITTO B RCB02 remote control requires one LR44 battery මෙහෙයුම සඳහා.

2.2. බැටරි ස්ථාපනය / ප්රතිස්ථාපනය

1. Locate the battery compartment on the remote control. This is typically on the back or side, secured by a small screw or a clip.
2. Using a small screwdriver or a coin, carefully open the battery compartment cover.
3. Remove the old battery (if replacing).
4. Insert the new LR44 battery, ensuring the positive (+) and negative (-) terminals are correctly aligned according to the markings inside the compartment.
5. බැටරි මැදිරි කවරය ප්රතිස්ථාපනය කර එය සුරක්ෂිත කරන්න.

2.3. දුරස්ථ පාලකය ක්‍රමලේඛනය කිරීම

Programming the BFT MITTO B RCB02 remote control to your gate or garage door opener system typically involves a specific procedure that varies depending on the model of your BFT receiver unit. Please refer to the instruction manual provided with your BFT gate or garage door opener system for detailed programming steps. General programming methods often include:

• Self-learning mode: Activating a programming button on the receiver unit and then pressing a button on the new remote.
• Cloning from an existing remote: Using a working remote to transmit its code to the new remote.
• Using a programming device: For advanced installations, a dedicated programmer might be used.

Ensure the remote control is within range of the receiver during the programming process.

3. මෙහෙයුම් උපදෙස්

Once programmed, the BFT MITTO B RCB02 remote control is straightforward to operate.

1. බොත්තම් හඳුනා ගන්න: The remote has two distinct buttons. Refer to your system's programming to know which button controls which function (e.g., open/close gate, pedestrian access, garage door).
2. සක්‍රිය කිරීමේ කාර්යය: Point the remote control towards your gate or garage door opener system (if line-of-sight is required for your specific receiver) and press the desired button firmly for approximately one second.
3. ප්‍රතිචාරය නිරීක්ෂණය කරන්න: The gate or garage door should begin its programmed action (open, close, stop).
4. පරාසය: Operate the remote within the effective range of your receiver. Obstructions can reduce this range.

4. නඩත්තු කිරීම

4.1. බැටරි ප්රතිස්ථාපනය

Replace the LR44 battery when the remote's operating range decreases significantly or if the indicator light (if present) does not illuminate when a button is pressed. Refer to Section 2.2 for battery installation instructions.

4.2 පිරිසිදු කිරීම

Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water, as this can damage the internal electronics.

4.3. ගබඩා කිරීම

Store the remote control in a dry place, away from direct sunlight and extreme temperatures. Avoid dropping the remote or subjecting it to strong impacts.

5. දෝශ නිරාකරණය

• දුරස්ථව ක්‍රියා නොකරයි:
  • බැටරිය පරීක්ෂා කරන්න. එය පැරණි හෝ ක්ෂය වී ඇත්නම් එය ප්‍රතිස්ථාපනය කරන්න (2.2 වගන්තිය බලන්න).
  • Ensure the remote is properly programmed to your receiver (refer to Section 2.3).
  • Verify that the receiver unit for your gate/garage door is powered on and functioning correctly.
• Reduced operating range:
  • බැටරිය ප්රතිස්ථාපනය කරන්න.
  • Check for obstructions between the remote and the receiver.
  • Ensure there are no sources of radio interference nearby.
• Gate/door opens/closes unexpectedly:
  • This is unlikely to be caused by the remote itself unless a button is being accidentally pressed. Check for external interference or issues with the main gate/door opener system.

If troubleshooting steps do not resolve the issue, contact a qualified BFT technician or your product supplier for assistance.

6. පිරිවිතර

7. වගකීම් සහ සහාය

For specific warranty information regarding your BFT MITTO B RCB02 remote control, please refer to the documentation provided at the time of purchase or contact your authorized BFT dealer or the retailer from whom you purchased the product. Warranty terms and conditions can vary by region and seller.

For technical support or further assistance, please contact your local BFT service center or the official BFT webසම්බන්ධතා විස්තර සඳහා අඩවිය.

නිෂ්පාදකයා: Sice