1. හැඳින්වීම
The Vimar 01910 is an electronic programmable thermostat designed for ON/OFF control of ambient temperature in heating and air conditioning systems. It offers daily and weekly programming capabilities, allowing users to set desired temperatures for different times throughout the week. This device operates on batteries, eliminating the need for a mains power connection, and is suitable for wall installation.
2 ආරක්ෂිත තොරතුරු
- Always disconnect power to the heating/cooling system before installation or maintenance.
- දේශීය විදුලි කේතයන්ට අනුකූලව සුදුසුකම් ලත් පුද්ගලයින් විසින් ස්ථාපනය සිදු කළ යුතුය.
- Do not expose the thermostat to direct sunlight, drafts, or heat sources, as this may affect temperature readings.
- බැටරි දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න. භාවිතා කළ බැටරි වගකීමෙන් යුතුව බැහැර කරන්න.
3. පැකේජ අන්තර්ගතය
පැකේජයේ පහත අයිතම අඩංගු බව තහවුරු කරන්න:
- Vimar 01910 Programmable Thermostat
- සවි කිරීම් ඉස්කුරුප්පු සහ බිත්ති ප්ලග්
- උපදෙස් අත්පොත
සටහන: AA LR6 1.5V batteries are required for operation and are not included in the package.
4. නිෂ්පාදන අවසන්view
The Vimar 01910 thermostat features a clear digital display and intuitive controls for easy operation.
රූපය 4.1: ඉදිරිපස view of the Vimar 01910 thermostat with its digital display showing time and temperature, and the central control button.
4.1 සංදර්ශක මූලද්රව්ය
- කාල දර්ශනය: වත්මන් කාලය පෙන්වයි.
- උෂ්ණත්ව සංදර්ශකය: Shows the current ambient temperature or the set temperature.
- Day of Week Indicators: Displays the current day (Mon, Tue, Wed, Thu, Fri, Sat, Sun).
- Programming Graph: A visual representation of the daily temperature program.
- Operating Mode Indicators: Icons for manual mode, programmed mode, etc.
4.2 පාලන බොත්තම්
Figure 4.2: Control diagram highlighting the central 'mouse' button (3) and other function buttons (6-11) located under the flip cover.
- Central 'Mouse' Button (3): Used for navigating menus, adjusting values, and confirming selections. Pressing it typically confirms a setting, while rotating it changes values.
- Flip-up Cover: Protects additional programming and function buttons.
- ක්රියාකාරී බොත්තම් (6-11): These buttons, located under the flip cover, are used for advanced programming, mode selection, and setting specific parameters. Refer to the detailed programming section for their specific functions.
5. ස්ථාපනය
The Vimar 01910 thermostat is designed for quick wall installation, either directly on the wall or over a flush-mounted box.
5.1 සවි කරන ස්ථානය
Choose a suitable location on an interior wall, approximately 1.5 meters (5 feet) from the floor. Avoid locations near windows, doors, air vents, or direct heat sources that could interfere with accurate temperature sensing.
5.2 රැහැන්
The thermostat uses a relay output (5(2) A 250 V) for ON/OFF control. It typically connects to the boiler or air conditioning unit via two wires. The terminals are usually labeled 'NO' (Normally Open) and 'C' (Common) or similar. Consult your heating/cooling system's manual for specific wiring requirements.
රූපය 5.1: පසුපස view of the thermostat, illustrating the mounting points and the area for electrical connections.
- Carefully detach the front cover from the back plate.
- Mount the back plate securely to the wall using the provided screws and wall plugs. Ensure it is level.
- Connect the two control wires from your heating/cooling system to the appropriate terminals on the back plate. Polarity is generally not an issue for simple ON/OFF control.
- Insert two fresh AA LR6 1.5V batteries into the battery compartment. Observe correct polarity.
- ඉදිරිපස කවරය පිටුපස තහඩුවට නැවත සවි කරන්න, එය ආරක්ෂිතව ස්ථානයට ක්ලික් කිරීම සහතික කරන්න.
6. මූලික සැකසුම
After installing the batteries, the thermostat will power on. You will need to set the current time and day.
- වේලාව සකසන්න: Use the central 'mouse' button to adjust the hour and minute. Press the button to confirm each setting.
- දිනය සකසන්න: After setting the time, proceed to set the current day of the week.
- උෂ්ණත්ව ඒකකය: If applicable, select between Celsius (°C) and Fahrenheit (°F).
Refer to the on-screen prompts and the detailed programming instructions for specific button presses.
7. මෙහෙයුම් මාතයන්
The Vimar 01910 offers different operating modes to suit your needs.
7.1 Programmed Mode
In this mode, the thermostat follows the daily or weekly temperature schedule you have set. This is the primary mode for energy efficiency and comfort.
7.2 අත්පොත ප්රකාරය
Manual mode allows you to override the programmed schedule and set a constant temperature. This is useful for temporary changes or if you prefer a fixed temperature.
- To activate Manual Mode: Open the flip-up cover and press the button with the 'hand' symbol (if available, or refer to your specific model's button layout). The 'hand' symbol should appear on the display.
- To adjust temperature in Manual Mode: Use the central 'mouse' button to set the desired temperature.
- To exit Manual Mode: Press the 'hand' symbol button again until the programming graph reappears on the display.
7.3 තාවකාලික අභිබවා යාම
Some models allow for a temporary temperature override in programmed mode. By rotating the central 'mouse' button, you can temporarily adjust the temperature. The thermostat will revert to the programmed schedule after a set period or at the next program change.
8. Programming the Schedule
The Vimar 01910 allows for detailed daily or weekly programming with multiple temperature levels.
- ක්රමලේඛන ආකාරය ඇතුළත් කරන්න: Open the flip-up cover and locate the programming button (often labeled 'P' or similar). Press it to enter programming mode.
- Select Day: Use the central 'mouse' button to select the day you wish to program (e.g., Monday).
- Set Time Periods and Temperatures: For each day, you can typically set multiple time periods (e.g., morning, day, evening, night) and assign a specific temperature to each period. The thermostat usually supports 3 distinct temperature levels (e.g., Comfort, Economy, Anti-freeze).
- පිටපත් කිරීමේ කාර්යය: The thermostat often includes a 'Copy' function (button 'C' in Figure 4.2) to replicate a day's program to other days of the week, simplifying setup.
- ක්රමලේඛන මාදිලියෙන් පිටවන්න: Once all desired programs are set, press the programming button again or wait for the thermostat to automatically exit programming mode.
For detailed step-by-step instructions on programming, refer to the specific tutorial videos available on the Vimar webඅඩවිය.
9. බැටරි ප්රතිස්ථාපනය
The thermostat is powered by two AA LR6 1.5V batteries. When the battery level is low, a low battery indicator will appear on the display.
- Carefully detach the front cover from the back plate.
- මැදිරියෙන් පැරණි බැටරි ඉවත් කරන්න.
- Insert two new AA LR6 1.5V batteries, ensuring correct polarity (+ and -).
- ඉදිරිපස කවරය නැවත සවි කරන්න.
The thermostat retains its programming settings during battery replacement for a short period, but it is advisable to replace them promptly.
10. නඩත්තු කිරීම
Vimar 01910 තාප ස්ථායයට අවම නඩත්තුවක් අවශ්ය වේ.
- පිරිසිදු කිරීම: Wipe the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
- බැටරි පරීක්ෂාව: Replace batteries annually or when the low battery indicator appears to ensure continuous operation.
11. දෝශ නිරාකරණය
ඔබේ Vimar 01910 තාප ස්ථාය සමඟ ගැටළු ඇති වුවහොත්, පහත පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:
- සංදර්ශකය හිස් ය: Check if batteries are correctly inserted and charged. Replace batteries if necessary.
- Heating/Cooling system not responding: Ensure the thermostat is in the correct operating mode (e.g., not in 'OFF' mode). Check wiring connections. Verify the heating/cooling system itself is functioning.
- වැරදි උෂ්ණත්ව කියවීම්: තාප ස්ථාය සෘජු හිරු එළියට, කෙටුම්පත් වලට හෝ තාප ප්රභවයන්ට නිරාවරණය නොවන බවට වග බලා ගන්න.
- ක්රමලේඛන ගැටළු: Review the programming steps in Section 8 or consult the online tutorials for detailed guidance.
If problems persist, contact Vimar customer support or a qualified technician.
12. පිරිවිතර
| ආදර්ශ අංකය | 01910 |
| මානයන් | 13 x 10.4 x 2 සෙ.මී |
| බර | ග්රෑම් 190 කි |
| බල සැපයුම | 2 x AA LR6 1.5V batteries (not included) |
| ප්රතිදාන රිලේ | 5(2) A 250 V |
| පාලන වර්ගය | සක්රිය / අක්රිය |
| ස්ථාපන වර්ගය | බිත්ති සවි කිරීම |
| විශේෂ ලක්ෂණ | Programmable (daily/weekly) |
13. වගකීම් සහ සහාය
This product is guaranteed for 2 years. Please retain your order number for warranty claims.
For additional instructions, tutorials, and support, please visit the official Vimar webඅඩවිය:
මෙම අත්පොත සඳහා ඇතුළත් කිරීමේ නිර්ණායක සපුරාලන නිල නිෂ්පාදන වීඩියෝ කිසිවක් විකුණුම්කරුගෙන් හමු නොවීය.