1. ඉවරයිview
The Eaton Ellipse PRO 650 FR is an Uninterruptible Power Supply (UPS) designed to provide backup power and surge protection for electronic equipment. It safeguards against power outages, sags, surges, and other electrical disturbances, ensuring continuous operation and protecting sensitive devices. This manual provides essential information for the safe and efficient use of your UPS.
2. පිහිටුවීම
2.1 ඉවත් කිරීම සහ පරීක්ෂා කිරීම
Carefully remove the UPS from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging for future transport or storage.
2.2 ස්ථානගත කිරීම
Place the UPS in a clean, dry, and well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate clearance around the ventilation openings to prevent overheating. The unit can be positioned vertically or horizontally.
Image: The Eaton Ellipse PRO 650 FR UPS shown in both vertical (tower) and horizontal (desktop) configurations, illustrating flexible placement options.
2.3 බලයට සම්බන්ධ කිරීම
- UPS විදුලි රැහැන බිම්ගත බිත්ති අලෙවිසැලකට සම්බන්ධ කරන්න.
- Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery performance.
2.4 සම්බන්ධක උපකරණ
Connect your computer, monitor, and other critical electronic devices to the UPS output receptacles. Ensure that the total load does not exceed the UPS's capacity (650VA/400W for this model). The UPS features both battery backup and surge-protected outlets, as well as surge-only outlets.
Image: Rear panel of the Eaton Ellipse PRO 650 FR UPS, displaying the input power connector, USB port, network protection ports, and multiple output receptacles for connecting devices.
2.5 USB සන්නිවේදන වරාය
Connect the supplied USB cable from the UPS to your computer. This allows for communication between the UPS and your computer, enabling features like automatic shutdown during extended power outages and monitoring of UPS status via software (available from Eaton's webඅඩවිය).
3. මෙහෙයුම
3.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
- බල ගැන්වීමට: බල බොත්තම ඔබා අල්ලාගෙන සිටින්න (සාමාන්යයෙන් සලකුණු කර ඇත්තේ ⏻ ⏻ ශ්රේණිය) for a few seconds until the display illuminates and the UPS emits a short beep.
- බලය අක්රිය කිරීමට: Press and hold the power button again until the display turns off and the UPS emits a longer beep.
3.2 LCD සංදර්ශකය සහ දර්ශක
The front LCD display provides real-time information about the UPS status, including input voltagඊ, ප්රතිදාන වෙළුමtage, load level, battery charge level, and operational mode. Use the arrow buttons next to the display to cycle through different information screens.
රූපය: විස්තරාත්මක view of the Eaton Ellipse PRO 650 FR's LCD screen, showing input power status (sine wave), battery charge level, current power output in watts (193W), and an 'OK' status indicator.
3.3 බැටරි මාදිලියේ ක්රියාකාරිත්වය
බලයක් අතරතුර ඕtage, the UPS will automatically switch to battery power. It will emit an audible alarm (typically beeping) to indicate it is operating on battery. The display will show the remaining battery charge. When utility power returns, the UPS will automatically switch back to utility power and begin recharging its battery.
3.4 EcoControl Function
The EcoControl function helps save energy by automatically shutting down peripherals connected to specific outlets when the master device (e.g., your computer) is turned off. Refer to the detailed manual for configuration of this feature.
4. නඩත්තු කිරීම
4.1 බැටරි සත්කාර
The UPS contains a sealed lead-acid battery. For optimal battery life, keep the UPS connected to a power source to maintain a full charge. Avoid storing the UPS in extreme temperatures. Batteries are consumable items and will eventually require replacement. Consult Eaton's support for battery replacement procedures and compatible battery models.
4.2 පිරිසිදු කිරීම
Ensure the UPS is powered off and disconnected from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners, as they may damage the unit.
5. දෝශ නිරාකරණය
If the UPS is not functioning as expected, refer to the following common issues:
- UPS ක්රියාත්මක නොවේ: Ensure the power cord is securely connected to a live wall outlet. Check the power button operation.
- No power to connected equipment: Verify that the UPS is turned on and that equipment is plugged into the correct outlets. Check for tripped circuit breakers on the UPS or in your building.
- UPS අඛණ්ඩව හෝ නිතර බීප් හඬ නඟයි: This usually indicates the UPS is operating on battery power due to an outage or low battery. If utility power is present, the battery may be weak or require replacement.
- බැටරිය ආරෝපණය නොවේ: Ensure the UPS is connected to a live wall outlet. If the issue persists after several hours, the battery may be faulty.
For more detailed troubleshooting, consult the full user manual available on the Eaton webඅඩවියට හෝ තාක්ෂණික සහාය අමතන්න.
6. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | ELP650FR |
| වෙළඳ නාමය | ඊටන් |
| ධාරිතාව | 650VA / 400W |
| ආදාන වෙළුමtage | වෝල්ට් 230 |
| බැටරි වර්ගය | මුද්රා තැබූ ඊයම් අම්ලය |
| Typical Battery Life (full load) | ආසන්න වශයෙන් විනාඩි 9 යි |
| මානයන් (LxWxH) | අඟල් 11.22 x 3.23 x 10.24 |
| බර | රාත්තල් 14.52 කි |
| USB Ports | 1 (USB 2.0) |
7. වගකීම් සහ සහාය
Eaton products are backed by a manufacturer's warranty. For specific warranty terms and conditions applicable to your region, please refer to the documentation included with your product or visit the official Eaton website. For technical assistance, product registration, or to locate service centers, please visit ඊටන් සහාය.
