K-Rain RPS රොටර් ඉසින (ආකෘතිය RPS75-NN) උපදෙස් අත්පොත

නිෂ්පාදනය අවසන්view

The K-Rain RPS Rotor Sprinkler, Model RPS75-NN, is a gear-driven rotary sprinkler designed for efficient and adjustable lawn irrigation. It features a 4-inch pop-up height and offers a wide range of arc and distance adjustments to suit various landscape needs.

රූපය: ඉහළට view of the K-Rain RPS Rotor Sprinkler, showing the K-Rain logo and adjustment points on the cap.

ප්රධාන ලක්ෂණ:

• Rotary Gear Driven Sprinkler mechanism for smooth operation.
• Adjustable Arc from 80 to 360 degrees for precise watering patterns.
• 4 Inch Pop Up Height ensures clearance over turf.
• Adjustable Spray Distance ranging from 25 to 45 feet.

ස්ථාපනය සහ සැකසුම

Proper installation is crucial for optimal performance of your K-Rain RPS Rotor Sprinkler. This sprinkler is designed for a 3/4-inch inlet connection.

පෙර-ස්ථාපන පිරික්සුම් ලැයිස්තුව:

• Ensure you have the necessary tools: shovel, pipe wrench, thread sealant tape, and the K-Rain adjustment tool (often sold separately or included with multi-packs).
• Verify your irrigation system's water pressure is within the recommended operating range for rotor sprinklers.
• Plan the placement of your sprinkler heads to ensure adequate coverage and minimize overspray.

ස්ථාපන පියවර:

1. Digging the Trench: Dig a trench from your main water line to the desired sprinkler location. The trench should be deep enough to allow the top of the sprinkler to be flush with the ground when installed.
2. Connecting to Lateral Line: Connect the sprinkler to the lateral irrigation line using a 3/4-inch threaded fitting. Apply thread sealant tape to all threaded connections to prevent leaks.
3. Positioning the Sprinkler: Place the sprinkler in the trench, ensuring the top of the sprinkler head is level with the ground surface. Backfill the trench, compacting the soil around the sprinkler to secure it in place.
4. Initial Water Test: Briefly turn on the water supply to flush the lines and check for any leaks. Turn off the water before proceeding to adjustments.

රූපය: පැත්ත view of the K-Rain RPS Rotor Sprinkler in its extended, operating position.

මෙහෙයුම සහ ගැලපීම

The K-Rain RPS Rotor Sprinkler allows for easy adjustment of both its spray arc and distance to customize your watering coverage.

Adjusting the Arc (Pattern):

The arc can be adjusted from 80 degrees (a narrow wedge) to a full 360 degrees (a complete circle). A special K-Rain adjustment tool is typically required for this process.

1. Identify the Fixed Left Stop: The sprinkler has a fixed left stop. This is the non-adjustable starting point of the spray pattern.
2. Rotate the Nozzle: Manually rotate the nozzle turret counter-clockwise until it stops at the fixed left stop.
3. Set the Right Stop: Insert the K-Rain adjustment tool into the arc adjustment slot (usually marked with a plus/minus symbol) on the top of the sprinkler. Turn the tool clockwise to increase the arc or counter-clockwise to decrease it. The sprinkler will rotate to show the new right stop.
4. Verify Arc: Turn on the water briefly to observe the spray pattern and make fine adjustments as needed.

ඉසින දුර සකස් කිරීම:

The spray distance can be adjusted from 25 to 45 feet. This is typically done by turning a screw located on the top of the sprinkler head.

• Locate the Distance Adjustment Screw: This screw is usually found near the nozzle opening on the top of the sprinkler.
• දුර සකසන්න: Using a flathead screwdriver, turn the screw clockwise to decrease the spray distance (the screw will partially block the water stream) or counter-clockwise to increase the distance.
• Observe and Refine: Turn on the water to check the spray distance and adjust further until the desired coverage is achieved.

නඩත්තු කිරීම

Regular maintenance helps ensure the longevity and efficient operation of your K-Rain RPS Rotor Sprinkler.

නිතිපතා පිරිසිදු කිරීම:

• සුන්බුන් සඳහා පරීක්ෂා කරන්න: Periodically inspect the sprinkler head for any debris (grass clippings, dirt) that might obstruct the nozzle or prevent proper pop-up and rotation.
• පිරිසිදු තුණ්ඩය: If the spray pattern is uneven, the nozzle may be partially clogged. Carefully remove any visible debris. If necessary, the nozzle can be removed for thorough cleaning, referring to K-Rain's specific nozzle removal instructions.

ශීත ඍතුව සඳහා (සීතල දේශගුණය සඳහා):

• කාණු පද්ධතිය: Before the first freeze, ensure all water is drained from your irrigation system, including the sprinkler heads, to prevent freeze damage.
• Blow Out Lines: For best results, use an air compressor to blow out the irrigation lines. Consult a professional if you are unsure about this process.

දෝෂගවේෂණය

Here are solutions to common issues you might encounter with your K-Rain RPS Rotor Sprinkler.

නිෂ්පාදන පිරිවිතර

Note: Specifications are subject to change without notice. Always refer to the product packaging for the most current information.

වගකීම් සහ සහාය

For specific warranty information regarding your K-Rain RPS Rotor Sprinkler, please refer to the documentation included with your purchase or visit the official K-Rain webඅඩවිය.

If you require technical assistance, have questions about installation, operation, or need to troubleshoot an issue not covered in this manual, please contact K-Rain Customer Support:

• K-Rain Official Webඅඩවිය: www.krain.com
• පාරිභෝගික සේවා සම්බන්ධතා: වෙත යොමු කරන්න website for current contact methods (phone, email, support forms).

Always ensure you have your product model number (RPS75-NN) and purchase date available when contacting support.