Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal User Manual

හැඳින්වීම

The Electro-Harmonix Small Clone Analog Chorus Pedal is designed to produce lush, shimmering chorus tones. This pedal is renowned for its rich, warm analog sound, making it a valuable tool for guitarists seeking classic modulation effects. It offers a range of chorus effects from subtle shimmer to dramatic, swirling modulation, suitable for various musical styles.

Key features include true bypass for signal integrity, a 9V battery for power, and a pure analog circuit for authentic tone.

පෙට්ටියේ ඇති දේ

• Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal
• 9V බැටරිය

සැලසුම

පැඩලය බල ගැන්වීම

The Small Clone EH 4600 can be powered by a 9V battery (included) or an optional 9V DC power adapter (not included). To install the battery, remove the bottom plate of the pedal.

සම්බන්ධතා

The pedal features standard 1/4 inch (6.35mm) audio jacks for input and output.

1. ඔබේ ගිටාරය හෝ වෙනත් උපකරණයක් සම්බන්ධ කරන්න ආදානය පැඩලයේ දකුණු පැත්තේ ජැක්.
2. සම්බන්ධ කරන්න ප්‍රතිදානය පැඩලයේ වම් පැත්තේ ජැක් එක ඔබේ පැත්තට amplifier or the input of another effects pedal.

මෙහෙයුම් උපදෙස්

The Small Clone EH 4600 features simple controls for easy tone shaping.

පාලනයන්

• අනුපාත බොත්තම: This knob controls the speed of the chorus effect. Turning it clockwise increases the speed, while turning it counter-clockwise decreases it.
• DEPTH Switch: This switch controls the intensity or width of the chorus effect. The up position provides a deeper, more pronounced chorus, while the down position offers a more subtle effect.
• තත්ත්වය LED: Indicates when the effect is active.
• පා මාරුව: Engages or bypasses the effect. The pedal features true bypass, ensuring your instrument's tone remains unaffected when the pedal is disengaged.

නිල නිෂ්පාදන වීඩියෝව

නඩත්තු කිරීම

To ensure optimal performance and longevity of your Small Clone EH 4600 pedal, follow these simple maintenance guidelines:

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
• බැටරි ආදේශනය: If using battery power, replace the 9V battery when the STATUS LED dims or the effect performance degrades. To replace, carefully remove the four screws on the bottom plate, replace the battery, and reattach the plate.
• ගබඩා: භාවිතයේ නොමැති විට සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක පෙඩලය ගබඩා කරන්න.

දෝෂගවේෂණය

If you encounter issues with your Small Clone EH 4600, try the following steps:

• ශබ්දයක් නැත: Check all cable connections. Ensure the power supply (battery or adapter) is functioning correctly. Verify that your instrument and amplifier are working.
• Weak or Distorted Effect: Replace the 9V battery if it's low. Ensure all cables are fully inserted and not damaged.
• අනවශ්‍ය ශබ්දය: Try using a different power supply or a fresh battery. Ensure the pedal is not placed too close to other electronic devices that might cause interference.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information, technical support, or further inquiries, please visit the official Electro-Harmonix store or contact their customer service directly.

ඔබට වැඩිදුර තොරතුරු සහ සහාය සොයා ගත හැක ඉලෙක්ට්‍රෝ-හාර්මොනික්ස් වෙළඳසැල.