SEIKO SQ767W Digital Alarm Clock User Manual

1. හැඳින්වීම

ස්තූතියි, උදව් කළාටasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

රූපය 1: ඉදිරිපස view of the SEIKO SQ767W Digital Alarm Clock.

2. නිෂ්පාදන ලක්ෂණ

• ද්විත්ව එලාම්: Set two independent alarm times.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• සංඛ්යාංක දර්ශකය: Clear display of time, date, temperature, and humidity.
• මඳක් නිදි කිරීමේ කාර්යය: Temporarily pauses the alarm.
• සැහැල්ලු කාර්යය: අඩු ආලෝකයේදී දෘශ්‍යතාව සඳහා සංදර්ශකය ආලෝකමත් කරයි.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• සම්පූර්ණ ස්වයංක්‍රීය දින දර්ශනය: Displays the correct date automatically.
• උෂ්ණත්වය/ආර්ද්‍රතාවය සංදර්ශකය: Provides current room temperature and humidity readings.

3. පිහිටුවීම

3.1 බැටරි ස්ථාපනය

1. ඔරලෝසුවේ පිටුපස ඇති බැටරි මැදිරි ආවරණය විවෘත කරන්න.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• ඔරලෝසුව ජනේලයක් අසල තබන්න.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • අධි පරිමා ආසන්නයේtage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. මෙහෙයුම් උපදෙස්

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

රූපය 3: ආපසු view with control buttons.

4.1 වේලාව සහ දිනය සැකසීම

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• අතින් සැකසීම: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 අනතුරු ඇඟවීම් සැකසීම (එලාම් 1 සහ එලාම් 2)

ඔරලෝසුවේ ස්වාධීන අනතුරු ඇඟවීම් දෙකක් ඇත.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 ස්නූස් සහ ආලෝක ක්‍රියාකාරිත්වය

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 උෂ්ණත්වය සහ ආර්ද්‍රතා සංදර්ශකය

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view these readings.

Figure 4: Close-up of the digital display.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing හෝ සංදර්ශකය.

5.2 බැටරි ප්රතිස්ථාපනය

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. දෝශ නිරාකරණය

• Clock not displaying time/functions: බැටරි ස්ථාපනය පරීක්ෂා කර බැටරි ක්ෂය වී නොමැති බවට වග බලා ගන්න.
• වේලාව වැරදියි: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• එලාම් නාද නොවේ: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• සංදර්ශකය අඳුරුයි: බැටරි ප්රතිස්ථාපනය කරන්න.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.