Fender '68 Custom Twin Reverb Amplifier උපදෙස් අත්පොත

1. හැඳින්වීම සහ අවසන්view

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2 ප්රධාන ලක්ෂණ

• Dual Channel Reverb and Tremolo: Both channels are equipped with reverb and tremolo effects, offering a vintage feel with modern versatility.
• Modified Bassman Tone Stack: The "custom" channel features a Bassman tone stack, providing enhanced tonal flexibility for use with various pedals.
• Celestion G12V-70 Speakers: Dual 12-inch Celestion G12V-70 speakers deliver a distinctively rock 'n' roll sound.
• Enhanced Responsiveness: Quicker gain onset and reduced negative feedback contribute to greater touch sensitivity.
• ඇතුළත් උපාංග: Comes with a fitted amplifier cover and a 2-button footswitch for convenient control of effects.

3. පිහිටුවීම

3.1 ඇසිරීම සහ ස්ථානගත කිරීම

ප්රවේශමෙන් ඉවත් කරන්න amplifier from its packaging. Place the amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the amplifier near heat sources or in direct sunlight.

3.2 බල සම්බන්ධතාවය

1. සහතික කරන්න amplifier's power switch is in the "OFF" position.
2. Connect the supplied power cord to the AC inlet on the rear panel of the ampජීවිතාරක්ෂකයා.
3. විදුලි රැහැනේ අනෙක් කෙළවර භූගත AC බල අලෙවිසැලකට සම්බන්ධ කරන්න.

3.3 Instrument Connection

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 Footswitch Connection

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. මෙහෙයුම් උපදෙස්

4.1 බල ගැන්වීම සක්‍රිය / අක්‍රිය කිරීම

1. බල ගැන්වීමට:
   • Ensure all volume controls are set to zero.
   • Flip the "POWER" switch to the "ON" position.
   • Wait approximately 30-60 seconds for the tubes to warm up.
   • Flip the "STANDBY" switch to the "ON" position.
   • Slowly raise the volume to your desired level.
2. බලය අක්රිය කිරීමට:
   • Lower all volume controls to zero.
   • Flip the "STANDBY" switch to the "OFF" position.
   • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 ඉදිරිපස පැනල් පාලන

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

• Inputs (1 & 2): Input 1 offers higher gain, while Input 2 provides lower gain.
• පරිමාව: Controls the overall output level of the selected channel.
• ට්‍රෙබල්: අධි-සංඛ්‍යාත ප්‍රතිචාරය සකස් කරයි.
• Middle (Custom Channel Only): Adjusts the mid-range frequency response.
• බාස්: අඩු සංඛ්‍යාත ප්‍රතිචාරය සකස් කරයි.
• Reverb: Controls the intensity of the digital hall reverb effect.
• Speed (Tremolo): ට්‍රෙමොලෝ ආචරණයේ වේගය සීරුමාරු කරයි.
• Intensity (Tremolo): ට්‍රෙමොලෝ ආචරණයේ ගැඹුර සකසයි.

4.3 Tone Shaping Tips

• For a classic clean Fender tone, start with Volume around 3-5, Treble and Bass at 5-7, and Reverb at 2-4.
• To achieve a natural tube overdrive, increase the Volume control. The amp will begin to break up as it gets louder.
• The 'Custom' channel's Bassman tone stack allows for more aggressive mid-range shaping, ideal for driving pedals.
• Experiment with the Speed and Intensity controls of the Tremolo to find your preferred modulation.

4.4 නිෂ්පාදන නිරූපණ වීඩියෝ

5. නඩත්තු කිරීම

5.1 සාමාන්‍ය සත්කාර සහ පිරිසිදු කිරීම

• තබා ගන්න ampලිෆයර් මෘදු වියළි රෙද්දකින් පිස දැමීමෙන් පිරිසිදු කරන්න.
• උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න, මේවා නිමාවට හානි කළ හැකිය.
• ආරක්ෂා කරන්න amplifier from dust, moisture, and extreme temperatures.
• When transporting, use the included fitted amplifier cover to protect against scratches and impacts.

5.2 නල ආදේශනය

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 ෆියුස් ප්රතිස්ථාපනය

නම් amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. දෝශ නිරාකරණය

• ශබ්දයක් නැත:
  • Check all cable connections (power, instrument, speaker).
  • සහතික කරන්න amplifier is powered on and the standby switch is engaged.
  • Verify instrument volume and tone controls are not set to zero.
  • Check if the fuse has blown (refer to Maintenance section).
• අධික ශබ්දය/හම්:
  • සියලුම කේබල් නිසි ලෙස ආරක්ෂා කර ඇති බවත් හොඳ තත්ත්වයේ පවතින බවත් සහතික කර ගන්න.
  • ප්ලග් කිරීමට උත්සාහ කරන්න amplifier into a different power outlet or a power conditioner.
  • චලනය කරන්න amplifier away from other electronic devices that may cause interference.
  • Faulty tubes can cause noise; consider professional inspection.
• දුර්වල හෝ විකෘති ශබ්දය:
  • Check instrument cable for damage.
  • Verify speaker connection.
  • Tubes may be worn out or faulty; professional inspection is recommended.

7. පිරිවිතර

ඉදිරිපස view of the Fender '68 Custom Twin Reverb Ampලිෆයර්, ප්‍රදර්ශනයasing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

පැත්ත view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

8. වගකීම් සහ සහාය

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

Fender Official Webඅඩවිය: www.fender.com