1. හැඳින්වීම
Thank you for choosing the Premiere XC-1000 Benchtop Centrifuge. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your centrifuge. The XC-1000 is designed for reliable separation of fluids in various medical, scientific, clinical, and industrial laboratory applications. Please read this manual thoroughly before operating the device.
2 ආරක්ෂිත තොරතුරු
ආරක්ෂිත ක්රියාකාරිත්වය සහතික කිරීමට සහ ඒකකයට හානි වීම හෝ කාර්ය මණ්ඩලයට තුවාල වීම වැළැක්වීමට, පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- Always read and understand this manual completely before operating the centrifuge.
- Place the centrifuge on a stable, level, and vibration-free surface. Ensure adequate clearance around the unit for ventilation.
- The unit features an automatic stop function that activates if the lid is opened before the cycle completes. Do not attempt to bypass this safety feature.
- Ensure tubes are properly balanced and securely placed in the rotor. Unbalanced loads can cause excessive vibration and damage.
- Use only tubes compatible with the centrifuge's rotor capacity (10 ml to 15 ml).
- Do not operate the centrifuge if the rotor or lid is damaged.
- Keep hands and loose clothing clear of the rotor area during operation.
- Unplug the unit from the power source before cleaning or performing any maintenance.
- තිදෙනා suction feet on the base are designed to keep the unit in place and reduce vibrations. Ensure they are clean and firmly gripping the surface.
3. නිෂ්පාදන අවසන්view
The Premiere XC-1000 is a compact benchtop centrifuge designed for ease of use and reliable performance. It features a fixed-angle rotor, a simple control panel, and essential safety mechanisms.
3.1. Centrifuge Components
3.2. පාලන පැනලය
ඉදිරිපස පාලක පැනලයට ඇතුළත් වන්නේ:
- Time LED Display: Shows the remaining run time.
- සක්රිය / අක්රිය බොත්තම: ඒකකය සක්රිය හෝ අක්රිය කරයි.
- Timer Selection Buttons (+/-): Adjusts the run time.
4. පිහිටුවීම
මූලික සැකසුම සඳහා මෙම පියවර අනුගමනය කරන්න:
- ඇසුරුම්: Carefully remove the centrifuge from its packaging and inspect for any shipping damage. Report any damage to your supplier immediately.
- ස්ථානගත කිරීම: Position the centrifuge on a sturdy, level, and clean workbench or laboratory surface. Ensure the three rubber suction feet on the base make firm contact with the surface for maximum stability and vibration reduction.
- බල සම්බන්ධතාවය: Connect the power cord to the centrifuge and then to a grounded electrical outlet. Ensure the voltage matches the unit's requirements (110V, 60Hz as indicated on the product label).
- Rotor Inspection: Open the lid and ensure the rotor is clean and free of any debris.
5. මෙහෙයුම් උපදෙස්
The Premiere XC-1000 operates at a fixed speed of 4000 RPM (1790 g RCF).
- බල ගැන්වීම: ඔබන්න සක්රිය/අක්රිය button to power on the centrifuge. The Time LED display will illuminate.
- වේලාව සකසන්න: භාවිතා කරන්න +/- buttons to set the desired run time. The timer can be set up to 60 minutes. For continuous operation, set the timer to '00' or a specific continuous hold setting if available (refer to display for 'continuous' indicator). The unit also features a last run memory function, recalling the previous setting.
- ලෝඩ් එස්amples: Open the lid and carefully place your sample tubes (10 ml to 15 ml capacity) into the rotor positions. It is crucial to balance the load. If you are running fewer than six tubes, place them symmetrically opposite each other to ensure even weight distribution. For example, if running two tubes, place them in positions 1 and 4. If running three, place them in 1, 3, and 5.
- පියන වසන්න: Close the lid firmly until it clicks into place. The centrifuge will not operate if the lid is not securely closed.
- මෙහෙයුම ආරම්භ කරන්න: The centrifuge will automatically begin spinning once the lid is closed and the timer is set.
- නිරීක්ෂණය: Allow the centrifuge to run for the set duration. The unit operates quietly, with a noise level below 70 dB.
- සම්පූර්ණ කිරීම: Once the set time expires, the centrifuge will automatically stop. Wait for the rotor to come to a complete stop before attempting to open the lid.
- Unload Samples: Open the lid and carefully remove your processed sample නල.
- විදුලිය විසන්ධි කිරීම: ඔබන්න සක්රිය/අක්රිය button to power off the unit when not in use.
6. නඩත්තු කිරීම
Proper maintenance ensures the longevity and optimal performance of your centrifuge.
- පිරිසිදු කිරීම: මෘදු, d ද්රාවණයකින් කේන්ද්රාපසාරී පිටත කොටස නිතිපතා පිරිසිදු කරන්න.amp cloth and a mild, non-abrasive detergent. Do not use harsh chemicals or abrasive cleaners, as they can damage the plastic surfaces.
- රොටර් රැකවරණය: Clean the rotor and tube wells after each use, especially if there are spills. Ensure the rotor is dry before closing the lid or operating the unit again.
- පියන: Keep the transparent lid clean to allow for visual inspection during operation.
- පරීක්ෂාව: Periodically inspect the power cord for any signs of damage. Check the rubber suction feet for wear.
- ගබඩා: When not in use for extended periods, store the centrifuge in a clean, dry environment.
7. දෝශ නිරාකරණය
If you encounter issues with your Premiere XC-1000, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Centrifuge does not power on. | No power supply; Power cord loose; On/Off button not pressed. | Ensure power cord is securely plugged in; Check power outlet; Press On/Off button firmly. |
| Centrifuge does not spin. | Lid not closed securely; Timer not set. | Close the lid firmly until it clicks; Set the desired run time using the +/- buttons. |
| මෙහෙයුම අතරතුර අධික කම්පනය හෝ ශබ්දය. | Unbalanced load; Centrifuge on an unstable surface; Damaged tubes or rotor. | Ensure tubes are balanced symmetrically; Place centrifuge on a stable, level surface; Inspect tubes and rotor for damage and replace if necessary. |
| Lid cannot be opened after a run. | Rotor has not come to a complete stop. | Wait for the rotor to stop completely. The safety interlock prevents opening while spinning. |
8. පිරිවිතර
- ආදර්ශ අංකය: XC-1000
- වෙළඳ නාමය: මංගල දර්ශනය
- වේගය: ස්ථාවර 4000 RPM
- උපරිම RCF: 1790 ග්රෑම්
- රොටර් වර්ගය: ස්ථාවර කෝණය
- ධාරිතාව: 6 tubes (10 ml to 15 ml fluid capacity)
- ටයිමරය: 0-60 minutes, Continuous Hold function, Last Run Memory
- ශබ්ද මට්ටම: < 70 dB
- මානයන් (පැකේජය): 32.77 සෙ.මී. x 29.21 සෙ.මී. x 29.21 සෙ.මී. (ආසන්න වශයෙන් 12.9 x 11.5 x 11.5 අඟල්)
- බර (පැකේජය): 5.9 kg (දළ වශයෙන් රාත්තල් 13)
- ආරක්ෂිත විශේෂාංග: Automatic lid stop, Suction feet for stability
- සහතික: CE certified, Manufactured in ISO 9001 certified factory
9. වගකීම් සහ සහාය
The Premiere XC-1000 Benchtop Centrifuge is backed by a comprehensive වසර 1ක වගකීමක් against manufacturer defects. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or service inquiries, please contact your authorized Premiere distributor or the manufacturer directly. Please have your model number (XC-1000) and purchase information ready when contacting support.
