හැඳින්වීම
The Pinlock HJ-20M lens is an anti-fog insert designed to prevent fogging on your motorcycle helmet visor. It creates a double-glazed effect by forming an airtight seal between the Pinlock lens and the helmet visor, effectively isolating the temperature difference that causes fog.
ගැළපුම
This Pinlock lens is specifically designed for HJC HJ-20M face shields. It is compatible with HJC FG-17 and HJC IS-17 helmet models that feature Pinlock-ready visors.
සටහන: Ensure your helmet visor has the built-in Pinlock pins for proper installation.
සැකසුම සහ ස්ථාපනය
- Prepare the Visor: Remove your helmet visor from the helmet. Clean the inside of the visor thoroughly with a soft cloth and mild soap and water. Ensure it is completely dry and free of dust or debris.
- Flex the Visor: Gently flex the visor flat to allow the Pinlock pins to move closer together. This will create tension when the Pinlock lens is installed.
- කාචය ස්ථානගත කරන්න: Align the Pinlock lens with the pins on the inside of your visor. The silicone seal on the Pinlock lens should face the visor.
- Insert the Pins: Carefully insert one side of the Pinlock lens onto a pin. While keeping the visor flexed, gently push the other side of the Pinlock lens onto the second pin.
- මුද්රාව පරීක්ෂා කරන්න: Release the visor. The Pinlock lens should now be securely in place with a tight seal around its edges. If there are gaps, remove the lens, flex the visor more, and re-install.
Text Description of Image: The image displays a clear, curved plastic lens, which is the Pinlock HJ-20M anti-fog insert. It has a slightly elongated oval shape, tapering at both ends. Small, semi-circular cutouts are visible at each end, designed to engage with the Pinlock pins on a helmet visor. The lens appears smooth and transparent, indicating its function as an optical insert.
මෙහෙයුම් උපදෙස්
Once properly installed, the Pinlock lens operates automatically to prevent fogging. No special actions are required during use. The lens maintains a clear field of vision by creating an insulating air layer between itself and the main visor.
නඩත්තු කිරීම සහ පිරිසිදු කිරීම
Cleaning the Pinlock Lens
To clean the Pinlock lens, remove it from the visor. Use only a soft, damp රෙදි සහ මෘදු සබන්. Do not use alcohol-based cleaners, abrasive materials, or strong chemical solvents, as these can damage the anti-fog coating and the silicone seal. Rinse with clean water and allow to air dry.
Cleaning the Visor
Clean the main visor separately using appropriate visor cleaning solutions or mild soap and water. Ensure the visor is completely dry before re-installing the Pinlock lens.
දෝෂගවේෂණය
Fogging Persists
- මුද්රාව පරීක්ෂා කරන්න: Ensure the Pinlock lens is creating a tight, airtight seal against the main visor. If there are gaps, remove and re-install the lens, flexing the visor more to increase tension on the pins.
- පිරිසිදු කාච: Dirt or oils on the lens surface can impair its anti-fog properties. Clean the lens as per the maintenance instructions.
- පින් ගැලපීම: Some Pinlock pins are adjustable. If fogging persists, you may need to rotate the pins slightly to increase the tension on the lens, thereby improving the seal.
සීරීම් හෝ හානි
- Handle the Pinlock lens with care. Avoid contact with sharp objects or abrasive surfaces.
- If the lens is scratched or damaged, its effectiveness may be reduced, and replacement is recommended.
පිරිවිතර
- වෙළඳ නාමය: පින්ලොක්
- ආකෘතිය: DKS 111 (HJ-20M)
- ද්රව්ය: ප්ලාස්ටික්
- වර්ණය: පැහැදිලියි
- ගැළපුම: HJC HJ-20M face shields (HJC FG-17, HJC IS-17 helmets)
- කාර්යය: Anti-fog insert
- මානයන්: ආසන්න වශයෙන් 11.81 x 3.94 x 3.94 අඟල්
- අයිතමයේ බර: ආසන්න වශයෙන් 1.41 අවුන්ස
සටහන: මානයන් සහ බර ආසන්න වශයෙන් වන අතර සුළු වශයෙන් වෙනස් විය හැකිය.
වගකීම් සහ සහාය
For specific warranty information or technical support regarding your Pinlock HJ-20M lens, please refer to the official Pinlock website or contact your authorized Pinlock dealer. Keep your purchase receipt as proof of purchase.
