NODOR STT-1000 Steel-Tip Darts User Manual

1. හැඳින්වීම

This manual provides essential information for the proper setup, operation, maintenance, and care of your NODOR STT-1000 Steel-Tip Darts. Please read this guide thoroughly to ensure optimal performance and longevity of your darts.

2. පැකේජ අන්තර්ගතය

Upon opening your NODOR STT-1000 Steel-Tip Darts package, verify that all components are present:

• 3 x NODOR STT-1000 Steel-Tip Darts (assembled with barrels, shafts, flights, and steel tips)
• 3 x Spare Shafts
• 3 x Spare Flights
• 1 x Deluxe Hinged Case with ABS clips

රූපය 1: ඉදිරිපස view of the NODOR STT-1000 Steel-Tip Darts packaging. It displays the three main darts, along with additional spare shafts and flights, all housed within a clear plastic blister pack. The packaging highlights '90% Tungsten' and 'Steel-Tip' features.

3. පිහිටුවීම

Your NODOR STT-1000 darts may come partially or fully assembled. If assembly is required, follow these steps:

1. සංරචක ඉවත් කරන්න: Carefully remove all darts and accessories from the packaging.
2. Attach Shaft to Barrel: Take a dart barrel and screw a shaft clockwise into the threaded end of the barrel until it is finger-tight. Avoid over-tightening, which can damage the threads.
3. Insert Flight into Shaft: Gently slide a flight into the four slots at the end of the shaft. Ensure the flight is fully seated and aligned properly for stable flight.
4. පරීක්ෂා කරන්න: Before use, ensure all components are securely attached.

4. Operating Your Darts

Proper technique is crucial for consistent dart throwing. Here are basic guidelines:

• ග්රහණය: Hold the dart barrel comfortably with your thumb and one or two fingers. The grip should be firm but not tense, allowing for a smooth release.
• ස්ථාවරය: Stand sideways to the dartboard, with your dominant foot forward and parallel to the oche (throwing line). Your body should be stable and balanced.
• අරමුණ: Focus on your target on the dartboard. Use your elbow as a pivot point.
• විසි කිරීමේ චලනය: Bring the dart back towards your ear, then extend your arm smoothly forward, releasing the dart with a flick of the wrist. Follow through with your arm pointing towards the target.
• Dartboard Distance: The standard throwing distance for steel-tip darts is 7 feet 9¼ inches (2.37 meters) from the face of the dartboard to the oche.

5. නඩත්තු කිරීම

Regular maintenance will extend the life of your darts and ensure consistent performance.

• Cleaning Barrels: Wipe the tungsten barrels with a soft, dry cloth to remove dirt and oils. For stubborn grime, a slightly damp රෙදි භාවිතා කළ හැකි අතර, වහාම වියළා ගත හැකිය.
• උපදෙස් සත්කාර: Periodically check the steel tips for sharpness and straightness. A dart sharpener can be used to maintain a sharp point. If a tip becomes severely bent or damaged, it may need professional replacement.
• Flight and Shaft Replacement: Flights and shafts are wear-and-tear items. Replace flights when they become torn, bent, or lose their shape, as this affects dart flight stability. Replace shafts if they crack, bend, or if the threads become stripped.
• ගබඩා: Always store your darts in the provided Deluxe Hinged Case to protect them from damage and keep all components together.

6. දෝශ නිරාකරණය

ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සඳහා විසඳුම් මෙන්න:

• Dart Not Sticking to Board:
  • Check if the steel tip is sharp. Sharpen if dull.
  • Ensure the tip is not bent. Straighten carefully or consider replacement.
  • Review your throwing technique; a weak throw may not embed the dart sufficiently.
• Dart Flying Erratically:
  • Inspect flights for tears, bends, or misalignment. Replace damaged flights.
  • Ensure flights are fully inserted into the shaft.
  • Check shafts for cracks or bends. Replace if damaged.
• Loose Shafts or Flights:
  • Tighten shafts onto barrels by hand.
  • Ensure flights are pushed firmly into the shaft slots.

7. පිරිවිතර

8 ආරක්ෂිත තොරතුරු

අවවාදයයි: Darts are not a toy. They are intended for adult use only and can cause serious or fatal injury if misused. Keep out of reach of children. Adult supervision is required if minors are present in the vicinity of dart play. Always ensure a clear throwing area and be aware of your surroundings.

රූපය 2: ආපසු view of the NODOR STT-1000 Steel-Tip Darts packaging. This side provides details on the 90% Tungsten material, includes spare components, and prominently displays safety warnings and warranty information.

9. වගකීම් සහ සහාය

All Nodor® darts are guaranteed against manufacturer's defects for one year from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please note that flights are considered wear-and-tear items and are not covered under this warranty if they wear out or break during normal play.

For warranty claims or technical support, please contact your retailer or the official Nodor customer service channels.