හැඳින්වීම
The Gima OXY-50 is a portable fingertip pulse oximeter designed for non-invasive spot-check and continuous monitoring of arterial oxygen saturation (SpO2) and pulse rate (PR). This device is suitable for use in hospitals, clinics, and home environments for adults and pediatric patients. It features a color OLED display, adjustable alarm limits, and data recording capabilities.
වැදගත් ආරක්ෂක තොරතුරු
- Consult a physician before using this device for medical diagnosis. This device is not intended for self-diagnosis or self-treatment.
- උපාංගය දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
- Use only the specified battery type (4 AAA batteries).
- MRI හෝ CT පරිසරයක උපාංගය භාවිතා නොකරන්න.
- Avoid using the device in environments with flammable anesthetics or other explosive substances.
- උපාංගය ජලයේ හෝ වෙනත් දියර වල ගිල්වන්න එපා.
- Ensure the finger is clean and dry before measurement. Nail polish or artificial nails may affect accuracy.
නිෂ්පාදනය අවසන්view
සංරචක
The Gima OXY-50 consists of the main unit with a color OLED display, control buttons, and a finger probe connection port. The device is designed for ease of use and portability.
Figure 1: Gima OXY-50 Pulse Oximeter main unit. This image shows the compact, handheld device with its color display and control buttons.
ඉදිරිපස පුවරුව සහ සංදර්ශකය
The front panel features the color OLED display and intuitive control buttons for power, menu navigation, and settings adjustment. The display provides clear readings of oxygen saturation and pulse rate.
රූපය 2: සවිස්තරාත්මක view of the Gima OXY-50 front panel. Labels indicate the SpO2 and PR readings, pulse waveform, battery status, and the functions of the power and navigation buttons.
ප්රධාන ලක්ෂණ
- 1.8-inch color OLED display with 160x128 resolution.
- Audible alarm and pulse tone.
- Data recording capability for up to 24 hours.
- Adjustable upper and lower alarm limits.
- PC software for real-time data transfer.
සැලසුම
බැටරි ස්ථාපනය
The Gima OXY-50 requires 4 AAA batteries (included). To install or replace batteries:
- උපාංගයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
- මැදිරිය විවෘත කිරීමට කවරය ලිස්සන්න හෝ ඔසවන්න.
- මැදිරිය තුළ දක්වා ඇති පරිදි නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින්, AAA බැටරි 4 ඇතුළු කරන්න.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
මුලික බලය සක්රිය
After installing the batteries, press the 'Power' button (usually marked with a universal power symbol) on the front panel to turn on the device. The display will illuminate, indicating the device is ready for use.
මෙහෙයුම් උපදෙස්
මිනුම් ගැනීම
Follow these steps to obtain an accurate SpO2 and pulse rate reading:
- උපාංගය බලගන්වා ඇති බව සහතික කර ගන්න.
- cl එක විවෘත කරන්නamp of the finger probe.
- Insert your finger into the probe, ensuring it is fully seated and the sensor is on the top of your finger. The probe should be placed on a clean, dry finger.
- cl නිදහස් කරන්නamp. Do not move your hand or finger during the measurement process.
- The device will automatically begin measuring SpO2 and pulse rate. Readings will appear on the color OLED display.
- Once the reading stabilizes, you can record the values. Remove your finger from the probe to turn off the device automatically after a few seconds.
සංදර්ශකය තේරුම් ගැනීම
The 1.8-inch color OLED display provides the following information:
- %SpO2: Oxygen Saturation level, displayed as a percentage.
- මහජන සම්බන්ධතා බීපීඑම්: ස්පන්දන වේගය මිනිත්තුවකට ස්පන්දන වලින්.
- ස්පන්දන තීරු ප්රස්තාරය: A visual representation of pulse strength.
- ප්ලෙතිස්මෝග්රැෆ් තරංග ආකාරය: A real-time graphical display of the pulse.
- බැටරි දර්ශකය: ඉතිරි බැටරි ආයු කාලය පෙන්වයි.
- Audible Signal Indicator: Indicates if the pulse tone is active.
අනතුරු ඇඟවීමේ සැකසුම්
The device features adjustable high and low alarm limits for SpO2 and pulse rate. To adjust these settings:
- Press the 'Menu' button to enter the settings menu.
- Use the navigation buttons (Up/Down) to select 'Alarm Settings'.
- Press 'Menu' again to enter the alarm settings sub-menu.
- Adjust the desired high and low limits for SpO2 and PR using the navigation buttons.
- Press 'Menu' to confirm your selections and exit the alarm settings.
Data Recording and Transfer
The Gima OXY-50 can record measurement data for up to 24 hours. A dedicated PC software is available for real-time data transfer and analysis. Connect the device to your computer using the USB port and follow the instructions provided with the software for data management.
නඩත්තු කිරීම
පිරිසිදු කිරීම
To ensure hygiene and proper functioning:
- Clean the device surface and the finger probe with a soft cloth dampened with a mild disinfectant, such as 70% isopropyl alcohol.
- උපාංගය කිසිදු දියරයක ගිල්වන්න එපා.
- Ensure the device is completely dry before its next use.
බැටරි ප්රතිස්ථාපනය
When the low battery indicator appears on the display, replace all 4 AAA batteries promptly to maintain accurate readings and device functionality. Refer to the 'Battery Installation' section for instructions.
ගබඩා කිරීම
Store the Gima OXY-50 in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If the device will not be used for an extended period, it is recommended to remove the batteries.
දෝෂගවේෂණය
| ගැටලුව | විසඳුම |
|---|---|
| No reading displayed or 'Finger Out' message | Ensure the finger is correctly and fully inserted into the probe. Avoid movement during measurement. Check for obstructions like nail polish. |
| සාවද්ය හෝ අස්ථායී කියවීම් | Ensure the finger is clean and dry. Avoid nail polish or artificial nails. Minimize strong ambient light interference. Ensure the device is not exposed to excessive vibration. |
| උපාංගය බලගන්වන්නේ නැත | Check battery installation and ensure correct polarity. Replace batteries if they are low or depleted. |
| අනපේක්ෂිත ලෙස එලාමය නාද වේ | Check the alarm limit settings. Ensure readings are within the set parameters. If readings are outside normal range, consult a medical professional. |
පිරිවිතර
- ආදර්ශ අංකය: 35100
- සංදර්ශකය: 1.8-inch color OLED, 160x128 resolution
- බල සැපයුම: 4 x AAA බැටරි (ඇතුළත්)
- නිෂ්පාදන මානයන් (L x W x H): 20 x 24 x 14 සෙ.මී
- බර: ග්රෑම් 360 කි
- දත්ත පටිගත කිරීම: පැය 24 දක්වා
- අනතුරු ඇඟවීම: Adjustable high/low limits for SpO2 and Pulse Rate
- නිෂ්පාදකයා: ඔක්සි
වගකීම් සහ සහාය
For detailed warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local Gima distributor. Keep your purchase receipt as proof of purchase for any warranty claims.
