හැඳින්වීම
The Hunter NODE600 is a battery-powered irrigation controller designed for isolated sites or areas without AC power. This manual provides detailed instructions for the installation, programming, and maintenance of your NODE600 controller to ensure efficient and reliable operation of your irrigation system.
නිෂ්පාදනය අවසන්view
The NODE600 controller is built with a robust, waterproof exterior, making it suitable for installation within a valve box. It operates on 9V batteries and features an LCD screen for easy programming. The controller supports up to 6 stations, offering flexible scheduling options.
රූපය 1: Hunter NODE Controller Interface. This image displays the front panel of a Hunter NODE controller, showing the LCD screen, programming buttons (PRG, plus, minus, arrow keys, enter), and wiring connections for common (COM) and sensor (SEN) inputs. The screen shows a time of 3:43 PM and battery status.
සැකසුම සහ ස්ථාපනය
- බැටරි ස්ථාපනය: The NODE600 requires one or two 9V alkaline batteries for operation. Open the battery compartment, insert the batteries, ensuring correct polarity, and securely close the compartment.
- සවි කිරීම: The controller is designed to mount directly to a valve's solenoid or within a valve box. Ensure the mounting location is secure and allows for easy access for programming and maintenance.
- රැහැන් සම්බන්ධතා:
- Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled 'COM' on the controller.
- Station Wires: Connect each station wire from your valves to the corresponding numbered terminal (1-6) on the controller.
- Sensor Wires (Optional): If using a rain or soil moisture sensor, connect its wires to the terminals labeled 'SEN'. Refer to your sensor's manual for specific wiring instructions.
මෙහෙයුම් උපදෙස්
The NODE600 utilizes standard Hunter controller programming logic, featuring 3 programs (A, B, C) and 4 start times per program.
Basic Programming Steps:
- වත්මන් වේලාව සහ දිනය සකසන්න:
- ඔබන්න PRG කාල සංදර්ශකය දැල්වෙන තුරු බොත්තම ඔබාගෙන සිටින්න.
- භාවිතා කරන්න + or - buttons to adjust the hour, then press the arrow right button to move to minutes and adjust.
- ඔබන්න arrow right button again to set the current day of the week. Use + or - තෝරා ගැනීමට.
- ඔබන්න PRG සුරැකීමට සහ පිටවීමට.
- Program Start Times:
- ඔබන්න PRG until 'START TIME' appears.
- භාවිතා කරන්න arrow right button to select Program A, B, or C.
- භාවිතා කරන්න + or - to set the desired start time for the first cycle.
- ඔබන්න arrow right to move to the next start time (up to 4 per program). Set or leave blank if not needed.
- ඔබන්න PRG සුරැකීමට.
- Set Station Run Times:
- ඔබන්න PRG until 'RUN TIME' appears.
- භාවිතා කරන්න arrow right button to select the desired station (1-6) and program (A, B, or C).
- භාවිතා කරන්න + or - to set the run time in minutes for that station.
- Repeat for all active stations in each program.
- ඔබන්න PRG සුරැකීමට.
- Set Watering Days:
- ඔබන්න PRG until 'WATER DAYS' appears.
- භාවිතා කරන්න arrow right button to select Program A, B, or C.
- Choose your watering schedule: specific days of the week (MO, TU, WE, TH, FR, SA, SU), Odd/Even days, or Interval watering. Use + or - to select and the arrow right button to confirm or move between options.
- ඔබන්න PRG සුරැකීමට.
For detailed programming sequences, refer to the official Hunter Industries support resources or video tutorials, as the interface can require careful navigation.
නඩත්තු කිරීම
- බැටරි ආදේශනය: Replace 9V batteries annually or when the low battery indicator appears on the LCD screen. Use high-quality alkaline batteries for optimal performance.
- පාරිසරික ආරක්ෂාව: While the NODE600 has a waterproof exterior, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions and physical damage.
- පිරිසිදු කිරීම: Periodically clean the exterior of the controller with a damp අපිරිසිදු හා සුන්බුන් ඉවත් කිරීමට රෙදි. සැර රසායනික ද්රව්ය භාවිතා නොකරන්න.
දෝෂගවේෂණය
- පාලකය ක්රියාත්මක නොවේ: බැටරි ස්ථාපනය පරීක්ෂා කර බැටරි නැවුම් බව සහතික කර ගන්න. අවශ්ය නම් ප්රතිස්ථාපනය කරන්න.
- ජල ප්රවාහයක් නොමැත:
- Verify that the main water supply is on.
- Check wiring connections to valves and the common wire.
- Ensure run times and start times are correctly programmed.
- If a sensor is connected, check its status; it might be preventing watering.
- Programming Difficulties: The programming interface can be complex. Refer to the detailed programming steps in this manual or consult Hunter's official support resources for visual guides and further assistance.
- නොගැලපෙන මෙහෙයුම: Ensure batteries are not low. Check for loose wiring connections.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | NODE600 |
| නිෂ්පාදන මානයන් | අඟල් 5 x 7 x 10 |
| අයිතමයේ බර | රාත්තල් 1.2 කි |
| බලශක්ති ප්රභවය | One or two 9V batteries |
| ස්ථාන ගණන | 6 |
වගකීම් තොරතුරු
Hunter Industries typically offers a warranty on its products. For specific warranty terms and conditions applicable to your NODE600 controller, please refer to the official documentation provided with your purchase or visit the Hunter Industries website. Warranty periods may be based on the product's manufacturing date code.
පාරිභෝගික සහාය
For further assistance, technical support, or detailed programming guidance, please contact Hunter Industries customer support. A reported support number is 1-800-733-2833, available from 6 AM to 4 PM Pacific Time. It is recommended to verify current contact information on the official Hunter Industries webඅඩවිය.
