1. හැඳින්වීම
This manual provides instructions for the safe and effective use of the Comark KM28 Thermocouple Kit. This kit is designed for accurate temperature measurement, particularly in food service applications, and includes the KM28 thermometer, a PK19M probe, and a CRS/5 protective boot.
උපාංගය ක්රියාත්මක කිරීමට පෙර කරුණාකර මෙම අත්පොත හොඳින් කියවා අනාගත යොමුව සඳහා තබා ගන්න.
රූපය 1: The Comark KM28 Thermocouple Kit, showing the KM28 thermometer unit, the PK19M probe, and the red coiled cable connecting them. The thermometer is encased in a blue protective boot.
2 කට්ටල සංරචක
The Comark KM28 Thermocouple Kit includes the following items:
- KM28 Thermometer: The main display unit for temperature readings.
- PK19M Probe: A Type K thermocouple probe for temperature sensing.
- CRS/5 Protective Boot: A durable blue silicone boot designed to protect the KM28 thermometer.
රූපය 2: සමීප රූපය view of the Comark KM28 thermometer unit, displaying "155.0 °F" and featuring "On/Off" and "°C/°F" buttons.
රූපය 3: The PK19M thermocouple probe, featuring a blue handle, a stainless steel shaft, a red coiled cable, and a yellow sub-miniature connector.
3. සැකසුම් උපදෙස්
3.1. බැටරි ස්ථාපනය
- Ensure the thermometer is powered off.
- Carefully remove the CRS/5 protective boot if it is already installed.
- Locate the battery compartment cover on the back of the KM28 thermometer.
- Open the cover and insert one 9V IEC 6LF22 alkaline battery, observing the correct polarity (+/-).
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
3.2. Attaching the Probe
- Identify the sub-miniature connector on the PK19M probe cable.
- Locate the corresponding input port on the KM28 thermometer.
- Gently insert the probe connector into the thermometer's port until it is firmly seated.
3.3. Installing the Protective Boot
Slide the CRS/5 protective boot over the KM28 thermometer unit. Ensure all buttons and the display are accessible and the boot fits snugly to provide maximum protection.
4. මෙහෙයුම් උපදෙස්
4.1. බල ගැන්වීම / අක්රිය කිරීම
- To power on the thermometer, press the සක්රිය/අක්රිය බොත්තම.
- ක්රියා විරහිත කිරීම සඳහා, ඔබන්න සක්රිය/අක්රිය button until the display turns off. The device also features an auto switch-off function to conserve battery life.
4.2. උෂ්ණත්වය මැනීම
- Ensure the probe is securely connected to the thermometer.
- උපාංගය සක්රිය කරන්න.
- Insert the tip of the PK19M probe into the substance or area where temperature measurement is required. Ensure the probe tip is fully immersed or in firm contact for accurate readings.
- තිරය මත කියවීම ස්ථාවර වන තුරු රැඳී සිටින්න.
4.3. උෂ්ණත්ව ඒකක මාරු කිරීම (°C/°F)
To switch between Celsius (°C) and Fahrenheit (°F), press the ° C / ° F. button while the thermometer is powered on.
4.4. ගණන් කිරීමේ ටයිමරය
The KM28 thermometer includes a countdown timer function. Refer to the full Comark KM28 manual for detailed instructions on setting and using the timer, as specific steps are not provided in this kit overview.
5 රැකවරණය සහ නඩත්තුව
5.1 පිරිසිදු කිරීම
The KM28 thermometer and PK19M probe are water resistant and designed for easy cleaning. To clean:
- Wipe the thermometer and probe with a damp රෙදි සහ මෘදු ඩිටර්ජන්ට්.
- Do not submerge the thermometer unit in water, despite its water-resistant properties. The probe can be rinsed directly.
- Ensure all components are thoroughly dried before storage or next use.
5.2. බැටරි ප්රතිස්ථාපනය
When the battery indicator appears on the display, replace the 9V battery as described in Section 3.1. Prompt battery replacement ensures continued accuracy and functionality.
5.3. ගබඩා කිරීම
Store the Comark KM28 Thermocouple Kit in a clean, dry place away from extreme temperatures and direct sunlight. Keep the protective boot on the thermometer when not in use to prevent damage.
6. දෝශ නිරාකරණය
If you encounter issues with your Comark KM28 Thermocouple Kit, refer to the following common problems and solutions:
- සංදර්ශකය නැත:
- බැටරිය නිවැරදිව ස්ථාපනය කර ඇති අතර ප්රමාණවත් ආරෝපණයක් තිබේදැයි පරීක්ෂා කරන්න. අවශ්ය නම් ප්රතිස්ථාපනය කරන්න.
- සහතික කරන්න සක්රිය/අක්රිය button has been pressed firmly.
- වැරදි කියවීම්:
- Verify the probe is securely connected to the thermometer.
- Ensure the probe tip is properly immersed or in full contact with the substance being measured.
- Check for any visible damage to the probe cable or tip.
- Confirm the thermometer is operating within its specified temperature range.
- ප්රතිචාර නොදක්වන බොත්තම්:
- Remove the protective boot and check if any debris is obstructing the buttons.
- බැටරිය ප්රතිස්ථාපනය කිරීමට උත්සාහ කරන්න.
If problems persist, contact Comark customer support for further assistance.
7. පිරිවිතර
| ආකෘතිය | KM28KIT |
| උෂ්ණත්වමානයේ වර්ගය | K තාප තාපක වර්ගය |
| Measurement Range (°C) | -40 ° C සිට 500 ° C දක්වා |
| Measurement Range (°F) | -40°F සිට 1000°F දක්වා |
| Instrument Accuracy | -30°C to +110°C (-22°F to +230°F): ±1°C/2°F Full Range: ±3% of reading |
| විභේදනය | 0.1° up to +190°C / +374°F, then 1° above |
| මෙහෙයුම් උෂ්ණත්ව පරාසය | 0°C සිට 50°C (32°F සිට 122°F) |
| බැටරි වර්ගය | 9V IEC 6LF22 Alkaline |
| බැටරි ආයු කාලය | ආසන්න වශයෙන් පැය 300 කි |
| විශේෂ ලක්ෂණ | Countdown timer, Water resistant, Membrane keypad, Auto switch-off |
| පරීක්ෂණ සම්බන්ධකය | Sub-miniature |
| නිෂ්පාදන මානයන් | 168 x 1 x 1 inches (Note: This dimension seems to be for the package or a combined item, not the thermometer itself. Refer to manufacturer for precise unit dimensions.) |
| අයිතමයේ බර | අවුන්ස 14.4 කි |
| UPC | 095969433419 |
රූපය 4: Dimensional diagram of the PK19M probe, indicating a total length of 100mm for the metal shaft, with a diameter of 3mm tapering to 1.5mm at the tip.
8. වගකීම් සහ සහාය
For warranty information, technical support, or service inquiries regarding your Comark KM28 Thermocouple Kit, please contact Comark Instruments directly or visit their official website. Details on specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's webඅඩවිය.
Manufacturer: Comark
