Clear-Com CC-400-X4 ද්විත්ව කන් හෙඩ්සෙට් පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Clear-Com CC-400-X4 Double-Ear Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. නිෂ්පාදන අවසන්view

The Clear-Com CC-400 double-ear headset is engineered for high-quality audio communication. It features headphones designed for high ambient-noise attenuation and a hyper-cardioid dynamic microphone. The headset's flexible design and soft ear-pads contribute to user comfort. The microphone boom can rotate 300 degrees, which also functions as an On/Off switch for quick microphone muting.

Image 2.1: Clear-Com CC-400-X4 Double-Ear Headset. This image displays the Clear-Com CC-400-X4 double-ear headset. It features large, circumaural earcups designed for noise attenuation, an adjustable headband, and a flexible microphone boom arm extending from the left earcup. The microphone is a hyper-cardioid dynamic type. A 4-pin female XLR connector is visible at the end of the headset cable.

3. පිහිටුවීම

3.1 හෙඩ්සෙට් එක සම්බන්ධ කිරීම

1. Locate the 4-pin female XLR connector on the headset cable.
2. Connect the 4-pin female XLR connector of the headset cable to the corresponding male XLR port on your intercom system or audio device. Ensure the connection is secure.

3.2 සුවපහසුව සඳහා සකස් කිරීම

1. Adjust the headband for a secure yet comfortable fit on your head.
2. Position the earcups over both ears, ensuring they fully enclose your ears for optimal sound isolation and comfort.
3. Adjust the flexible microphone boom arm so the microphone is positioned approximately 1 to 2 inches from your mouth.

4. මෙහෙයුම් උපදෙස්

4.1 Microphone Activation and Muting

• The microphone is activated or muted by rotating the boom arm.
• නිහඬ කිරීමට: Rotate the microphone boom arm upwards, away from your mouth.
• සක්‍රිය කිරීමට: Rotate the microphone boom arm downwards, towards your mouth.
• The boom arm has a 300-degree rotation range for this function.

4.2 ශ්‍රව්‍ය නිරීක්ෂණය

• Ensure your audio device or intercom system is properly configured for audio output to the headset.
• Adjust volume levels on your connected device as needed for comfortable listening.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

• To clean the headset's exterior, use a soft, dry cloth.
• For the soft ear-pads, a slightly damp cloth with a mild soap solution can be used. Ensure no moisture enters the earcup components. Allow the ear-pads to air dry completely before using the headset.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the headset's finish and materials.

5.2 ගබඩා කිරීම

• Store the headset in a clean, dry environment away from direct sunlight and extreme temperatures.
• Avoid wrapping the cable tightly around the headset, as this can cause stress and damage to the cable over time.

6. දෝශ නිරාකරණය

6.1 ශ්‍රව්‍ය ප්‍රතිදානයක් නොමැත

• සම්බන්ධතා පරීක්ෂා කරන්න: Ensure all cable connections, especially the 4-pin XLR connector, are fully and securely seated in their respective ports.
• වෙළුම් සැකසුම්: Verify that the volume levels on your connected intercom system or audio device are not muted and are set to an audible level.
• උපාංග ගැළපුම: Confirm that the headset is compatible with the audio device it is connected to.

6.2 මයික්‍රෆෝනය ක්‍රියා නොකරයි

• මයික්රොෆෝන ස්ථානය: Ensure the microphone boom arm is rotated downwards (towards your mouth) to the 'on' position.
• කේබල් අඛණ්ඩතාව: හෙඩ්සෙට් කේබලය තුළ කිසියම් දෘශ්‍යමාන හානියක් හෝ ගැටීමක් තිබේදැයි පරීක්ෂා කරන්න.
• වෙනත් උපාංගයක් සමඟ පරීක්ෂා කරන්න: If possible, test the headset with another compatible audio device to determine if the issue lies with the headset or the connected equipment.

6.3 දුර්වල ශබ්ද ගුණාත්මකභාවය

• කේබල් තත්ත්වය: Check the headset cable for any signs of damage that might affect audio transmission.
• Earcup Seal: Ensure the earcups are properly seated around your ears to provide optimal noise isolation and sound delivery.
• බාධා කිරීම්: Move away from potential sources of electromagnetic interference that might affect audio quality.

7. පිරිවිතර

8. වගකීම් සහ සහාය

Clear-Com products typically come with a standard manufacturer's warranty. For specific warranty details, service, or technical support, please refer to the official Clear-Com website or contact their customer service directly. It is recommended to keep your purchase receipt for any warranty claims.

වැඩිදුර සහාය සඳහා, පිවිසෙන්න Clear-Com official webඅඩවිය.