1. හැඳින්වීම
Thank you for choosing the Pro-Ject Debut Carbon DC Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your turntable. Please read these instructions carefully before using the device to ensure optimal performance and longevity.
The Pro-Ject Debut Carbon DC is a high-fidelity turntable designed for exceptional audio reproduction, featuring an 8.6-inch carbon fiber tonearm and a pre-mounted Ortofon 2M Red cartridge.
2. ආරක්ෂිත උපදෙස්
- Always disconnect the turntable from the power supply before cleaning or performing any maintenance.
- Keep the turntable away from water, moisture, and direct sunlight.
- Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.
- ඒකකය ඔබම අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.
- Avoid touching the stylus with your fingers to prevent damage.
3. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:
- Pro-Ject Debut Carbon DC Turntable with pre-mounted Ortofon 2M Red Cartridge
- Connect-It E RCA Cable
- Removable Power Supply
- ෆීල්ට් ප්ලැටර් මැට්
- දූවිලි ආවරණය
- ප්රති බර
- ස්කේට් විරෝධී බර
4. පිහිටුවීම
4.1 ඇසිරීම සහ ස්ථානගත කිරීම
Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from direct heat sources or strong vibrations. Ensure adequate ventilation around the unit.
4.2 තහඩු සහ පටි සවි කිරීම
- Place the main platter onto the turntable spindle.
- Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and around the motor pulley. Ensure the belt is not twisted.
Image: The Pro-Ject Debut Carbon DC Turntable fully assembled, showing the platter, tonearm, and Ortofon 2M Red cartridge. This image illustrates the overall appearance of the turntable after initial setup.
4.3 Tonearm Balance and Tracking Force
The Ortofon 2M Red cartridge is pre-mounted. However, proper tonearm balance and tracking force adjustment are crucial for optimal sound and record preservation.
- With the anti-skate weight removed, carefully unclip the tonearm and move it away from the tonearm rest.
- Rotate the counterweight on the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
- Once balanced, return the tonearm to its rest. Hold the counterweight steady and rotate the numbered ring until '0' aligns with the line on the tonearm.
- Rotate the entire counterweight counter-clockwise until the desired tracking force is set. For the Ortofon 2M Red, the recommended tracking force is typically 1.8 grams.
රූපය: සමීප ඡායාරූපයක් view of the Ortofon 2M Red cartridge mounted on the carbon fiber tonearm of the Pro-Ject Debut Carbon DC turntable. This highlights the stylus and cartridge assembly.
4.4 Anti-Skate Adjustment
The anti-skate mechanism prevents the tonearm from being pulled inwards towards the center of the record. Attach the small loop of the anti-skate weight's thread to the second groove of the anti-skate stub on the tonearm support.
4.5 වෙත සම්බන්ධ වීම Ampජීවිතාරක්ෂකයා
Connect the supplied RCA cable from the turntable's output jacks to the 'Phono' input on your amplifier or a dedicated phono pre-ampජීවිතාරක්ෂක ඔබේ නම් amplifier does not have a 'Phono' input, you will need an external phono pre-amplifier. Connect the ground wire from the turntable to the ground terminal on your amplifier or phono pre-ampහම් අවම කිරීමට ලිෆයර්.
රූපය: පැත්තක් view of the Pro-Ject Debut Carbon DC Turntable, illustrating the rear panel with RCA output jacks and the power input. This shows where to connect audio cables and the power supply.
4.6 බල සම්බන්ධතාවය
Connect the power supply to the turntable's power input and then plug it into a suitable wall outlet.
4.7 දූවිලි ආවරණය
Carefully attach the dust cover to the hinges on the rear of the turntable. The dust cover protects the turntable from dust when not in use.
5. මෙහෙයුම් උපදෙස්
5.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
The power switch is located on the underside of the turntable, near the front left corner. Flip the switch to the 'ON' position to start the platter rotation. Flip it to 'OFF' to stop.
5.2 වාර්තාවක් වාදනය කිරීම
- Place a record on the platter, ensuring it is centered.
- බල ස්විචය භාවිතයෙන් හැරවුම් මේසය සක්රිය කරන්න.
- කියුයිං ලීවරය භාවිතයෙන් ටෝනියර්ම් එක ප්රවේශමෙන් ඔසවන්න.
- ටෝනාර්ම් එක තැටියේ අපේක්ෂිත ආරම්භක කට්ටයට ඉහළින් තබන්න.
- Gently lower the tonearm using the cueing lever. The stylus will make contact with the record and playback will begin.
- At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest.
5.3 Changing Playback Speed (33/45 RPM)
The Pro-Ject Debut Carbon DC requires manual adjustment to change playback speed between 33 and 45 RPM.
- Turn off the turntable.
- Carefully remove the felt mat and lift the platter off the spindle.
- Locate the motor pulley. It has two different diameter steps.
- For 33 RPM, place the drive belt around the smaller diameter step of the motor pulley.
- For 45 RPM, place the drive belt around the larger diameter step of the motor pulley.
- Replace the platter and felt mat.
6. නඩත්තු කිරීම
6.1 හැරවුම් මේසය පිරිසිදු කිරීම
Use a soft, lint-free cloth to gently wipe the turntable chassis and dust cover. Avoid using abrasive cleaners or solvents. For the platter, use a slightly damp cloth if necessary, ensuring it is dry before use.
6.2 ස්ටයිලස් සත්කාරය
The stylus is delicate. Use a soft stylus brush, brushing gently from back to front, to remove dust and debris. Never use your fingers to clean the stylus. A dirty stylus can damage your records and degrade sound quality.
6.3 Drive Belt Inspection
Periodically inspect the drive belt for signs of wear or stretching. A worn belt can lead to inconsistent playback speed. Replace the belt if it appears damaged or loose.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power cable not connected; power outlet faulty; power switch off. | බල සම්බන්ධතා පරීක්ෂා කරන්න; වෙනත් අලෙවිසැලක් උත්සාහ කරන්න; බල ස්විචය ක්රියාත්මක බව සහතික කර ගන්න. |
| නාලිකා එකකින් හෝ දෙකකින් ශබ්දයක් නැත | RCA cables not connected correctly; phono input not selected; damaged stylus; ampලිෆයර් ගැටළු. | Check RCA connections; select correct input on amplifier; inspect stylus; test amplifier with another source. |
| හම්මිං ශබ්දය | Ground wire not connected; proximity to other electronic devices; faulty cables. | Connect ground wire; move turntable away from other electronics; try different RCA cables. |
| වැරදි පසුධාවන වේගය | Drive belt incorrectly positioned; worn drive belt. | Adjust drive belt to correct motor pulley step; replace drive belt if worn. |
| විකෘති ශබ්දය | Dirty or damaged stylus; incorrect tracking force; worn record. | Clean or replace stylus; re-adjust tracking force; try a different record. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact your dealer or Pro-Ject customer support for assistance.
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| මාදිලියේ නම | Debut Carbon DC |
| අයිතම ආදර්ශ අංකය | 9120050435933 |
| නිෂ්පාදන මානයන් | අඟල් 12.6 x 16.34 x 4.65 |
| අයිතමයේ බර | රාත්තල් 12.35 (ග්රෑම් 5600) |
| වෙළඳ නාමය | Pro-Ject |
| උපරිම භ්රමණ වේගය | 45 RPM (also supports 33 RPM) |
| ඇතුළත් සංරචක | Turntable with pre-mounted Ortofon 2M Red Cartridge, Connect-It E RCA Cable, removable Power Supply, felt platter mat, and dust cover |
| විශේෂ ලක්ෂණ | Carbon Tube Tone-Arm, Balanced Steel Platter, Decoupled Motor, Pre-Mounted Ortofon 2M Red Cartridge |
| ද්රව්ය | ඉංජිනේරු දැව, ප්ලාස්ටික් |
| වර්ණය | පියානෝ කළු |
| ගැළපෙන උපාංග | Speaker, Personal Computer, Desktop, Smartphone, Tablet, Laptop (via appropriate audio interfaces/pre-amps) |
9. වගකීම් සහ සහාය
Specific warranty information for the Pro-Ject Debut Carbon DC Turntable is typically provided with the product packaging or available from your authorized dealer. Please retain your proof of purchase for warranty claims.
For technical support, service, or further inquiries, please contact your local Pro-Ject dealer or visit the official Pro-Ject Audio Systems webඅඩවිය.
