හැඳින්වීම
Welcome to the Delta 40-694 20-inch Variable Speed Scroll Saw. This manual provides essential information for the safe and efficient operation, maintenance, and setup of your new scroll saw. Please read it thoroughly before use to ensure proper handling and to maximize the lifespan of your tool. This scroll saw is designed for precision cutting in various materials, primarily wood, offering variable speed control for optimal performance.
සාමාන්ය ආරක්ෂණ උපදෙස්
Always follow basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Keep this manual for future reference.
- අක්ෂි ආරක්ෂණ පළඳින්න: සෑම විටම අදාළ ප්රමිතීන්ට අනුකූල ආරක්ෂිත කණ්නාඩි හෝ ඇස් කණ්ණාඩි පළඳින්න.
- ආරක්ෂිත වැඩ කොටස: Ensure the material being cut is firmly secured to prevent movement during operation.
- දෑත් පැහැදිලිව තබා ගන්න: Never place hands or fingers near the blade while the saw is running.
- නිසි වාතාශ්රය: Operate the saw in a well-ventilated area to avoid inhaling dust.
- ගැලපීම් වලට පෙර පේනුව විසන්ධි කරන්න: Always disconnect the saw from the power source before changing blades, making adjustments, or performing maintenance.
- Maintain Awareness: Stay alert and use common sense. Do not operate the saw when tired or under the influence of drugs, alcohol, or medication.
- නිවැරදි තලය භාවිතා කරන්න: Select the appropriate blade for the material and type of cut.
සැකසීම සහ එකලස් කිරීම
ඇසිරීම සහ පරීක්ෂා කිරීම
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Report any damage immediately to your dealer. Ensure all parts listed in the packing list are present before proceeding with assembly.
Blade Installation and Tensioning
The Delta 40-694 features a single-lever, tool-free blade tensioning system for quick and easy blade changes. The upper arm lifts and locks in the raised position, providing ample space for blade access, especially for fretwork.
- Lift the upper arm to its fully raised position and engage the locking mechanism.
- cl තලය ලිහිල් කරන්නamps on both the upper and lower arms.
- Insert the new scroll saw blade, ensuring the teeth are pointing downwards.
- තලය cl ආරක්ෂිතව තද කරන්නamps.
- Release the upper arm and apply tension using the blade tensioning lever. Adjust until the blade is taut but not over-stressed.
විස්තර view of the scroll saw's upper arm, highlighting the blade tensioning lever, variable speed dial, and flexible dust blower. This area is crucial for blade changes and precise adjustments.
වගු ගැලපීම
The large, cast-iron table can be tilted from 0° to 45° left and right for angled cuts. Use the angle scale and locking knob located beneath the table to set the desired angle. Ensure the table is securely locked before operation.
දූවිලි පිපිරුම් ගැලපුම
The flexible dust blower helps keep the cutting line clear of sawdust. Position the nozzle directly over the cutting area for optimal visibility.
ඕවර් එකක්view of the Delta 40-694 scroll saw, showing its main components including the table, arm, and base.
මෙහෙයුම් උපදෙස්
බලය සක්රිය / අක්රිය සහ වේග පාලනය
The On/Off switch and electronic variable speed dial are conveniently located on the arm for easy access. Turn the dial to adjust the Strokes Per Minute (SPM) from 400 to 1,750, allowing you to match the speed to the material and blade type for optimal cutting results.
කැපුම් ධාරිතාව
- At 90°: 2-1/8 inches
- At 45° (Left and Right): 1-5/8 inches
General Cutting Techniques
Always feed the workpiece slowly and steadily into the blade. Avoid forcing the material, as this can cause the blade to break or result in an uneven cut. For intricate cuts, use a finer blade and a slower speed. For thicker materials, a coarser blade and moderate speed may be more effective.
නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ අනුචලන කියතෙහි ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි.
- පිරිසිදු කිරීම: After each use, unplug the saw and use a brush or vacuum to remove sawdust from the table, blade area, and motor vents.
- බ්ලේඩ් රැකවරණය: Proper blade tensioning is crucial for maximizing blade life and accuracy. Replace dull or damaged blades promptly.
- පරීක්ෂාව: Periodically check all fasteners and moving parts for tightness and wear. Tighten any loose screws and replace worn components as needed.
A view of the integrated blade storage compartment located on the scroll saw, designed for convenient access to different blade types.
දෝෂගවේෂණය
මෙම කොටස ඔබේ අනුචලන කියත සමඟ ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු ආමන්ත්රණය කරයි.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| තලය නිතර කැඩී යයි | Incorrect blade tension, wrong blade type for material, forcing workpiece, worn blade. | Adjust blade tension, select appropriate blade, reduce feed rate, replace blade. |
| අධික කම්පනය | Loose components, saw not securely mounted, unbalanced workpiece. | Check and tighten all fasteners, ensure saw is stable, support workpiece properly. |
| Poor cut quality (rough edges, inaccurate cuts) | Dull blade, incorrect blade type, improper feed rate, incorrect table angle. | Replace blade, use finer blade for detail, adjust feed rate, verify table angle. |
| Saw ආරම්භ නොවේ | විදුලිය නැහැ, ස්විච් එකේ දෝෂයක්, මෝටරයේ ගැටලුවක්. | Check power connection, ensure switch is ON, consult qualified service personnel. |
පිරිවිතර
Key technical specifications for the Delta 40-694 20-inch Variable Speed Scroll Saw:
- Ampකෝපය: 1.3 Amps
- වේගය: 400-1,750 SPM (Strokes Per Minute)
- ධාරිතාව: අඟල් 20
- ආඝාත දිග: අඟල් 3/4
- මේස ප්රමාණය: අඟල් 16 x අඟල් 24
- මේස ඇලවීම: 0° – 45°, Left and Right
- නිෂ්පාදන මානයන්: 30"අඟල් x 20"අඟල් x 13"උ
- අයිතමයේ බර: පවුම් 60ක්
- වෙළුමtage: වෝල්ට් 120
- වට්tage: වොට් 156 යි
- බ්ලේඩ් ද්රව්ය: අධිවේගී වානේ
- මතුපිට නිර්දේශය: ලී
- බලශක්ති ප්රභවය: විදුලි කේබලය
වගකීම් සහ සහාය
වගකීම් තොරතුරු
This Delta 40-694 Scroll Saw is covered by a වසර 5ක සීමිත වගකීමක්. Please refer to the warranty card included with your product for full terms and conditions, or visit the official Delta Power Tools webසවිස්තරාත්මක වගකීම් තොරතුරු සඳහා අඩවිය.
පාරිභෝගික සහාය
For technical assistance, replacement parts, or warranty claims, please contact Delta Power Tools customer service. Contact information can typically be found on the manufacturer's webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය මත.
