හැඳින්වීම
The Maximum IRB-100 IR Bender, Model 1262, is an infrared (IR) remote control extender designed to allow you to control up to three IR-controlled devices that are out of sight or located in a cabinet. It receives IR signals from your remote control and re-transmits them via three included IR emitting probes to your target devices. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
සැලසුම
පැකේජයේ අන්තර්ගතය
- 1 x Maximum IRB-100 IR Bender Main Unit
- 3 x IR Emitting Probes
- 1 x AC Adapter (230V)
- 1 x Mounting Set
බල සම්බන්ධතාවය
The IRB-100 can be powered using either the included 230V AC adapter or a 5V USB power source. Connect the appropriate power cable to the power input port on the main unit. Ensure the power source is stable and provides the correct voltage.
Connecting IR Emitting Probes
Connect each of the three IR emitting probes to the designated output ports on the IRB-100 main unit. These probes will transmit the IR signals to your devices. Each probe has a 2-meter cable length for flexible placement.
ස්ථානගත කිරීම සහ සවි කිරීම
Position the IRB-100 main unit in a location where it can easily receive IR signals from your remote control. The unit features LED indicators to confirm signal reception. Place the IR emitting probes directly over the IR receiver window of each device you wish to control. The included mounting set can be used to secure the main unit or probes if desired, ensuring optimal signal transmission and reception.
This image shows the Maximum IRB-100 IR Bender main unit, demonstrating the connection points for the power supply and the three IR emitting probes. The compact design allows for discreet placement near your entertainment system.
මෙහෙයුම් උපදෙස්
මූලික මෙහෙයුම
Once the IRB-100 is powered on and the IR emitting probes are correctly positioned, simply point your remote control at the main unit. The IRB-100 will receive the IR signal and instantly re-transmit it through the connected probes to control your hidden devices. The system supports controlling up to three devices simultaneously.
LED දර්ශක
The IRB-100 unit is equipped with LED indicators. These LEDs illuminate to confirm that the unit is powered on and actively receiving IR signals from your remote control. If the LEDs do not light up when a remote signal is sent, refer to the Troubleshooting section.
පරාසය සහ කාර්ය සාධනය
The IRB-100 offers a maximum reception range of 5 meters (approximately 16 feet) for your remote control. It operates within a working frequency of 433.92MHz and an IR frequency range of 30-60kHz, ensuring compatibility with a wide array of standard IR remote controls.
නඩත්තු කිරීම
To ensure the longevity and optimal performance of your Maximum IRB-100 IR Bender, follow these simple maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the main unit and probes. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the device.
- ගබඩා: දිගු කාලයක් භාවිතයේ නොමැති විට, උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- හැසිරවීම: Handle the unit and probes with care. Avoid dropping or subjecting them to strong impacts.
දෝෂගවේෂණය
If you encounter issues with your IRB-100 IR Bender, please consult the following troubleshooting steps:
බලය නැත
- බල සම්බන්ධතාවය පරීක්ෂා කරන්න: Ensure the AC adapter or USB power cable is securely connected to the IRB-100 and the power outlet/USB port.
- බල ප්රභවය සත්යාපනය කරන්න: Confirm that the power outlet or USB port is functional. Try plugging in another device to test it.
- කේබල් පරීක්ෂා කරන්න: Check the power cable for any visible damage.
උපාංග ප්රතිචාර නොදක්වයි
- පරීක්ෂණ ස්ථානගත කිරීම: Ensure each IR emitting probe is positioned directly over the IR receiver window of the target device. Slight adjustments may be necessary.
- IR Bender Reception: Confirm that the IRB-100 main unit is receiving signals from your remote control (check LED indicators). Ensure there are no obstructions between your remote and the main unit.
- දුරස්ථ පාලක ක්රියාකාරීත්වය: Test your remote control with the device directly to ensure it is working correctly.
- උපාංග ගණන: The unit supports up to 3 devices. Ensure you are not attempting to control more than this.
සීමිත පරාසය
- බාධා: Ensure there is a clear line of sight between your remote control and the IRB-100 main unit.
- බාධා කිරීම්: Minimize potential sources of IR interference, such as direct sunlight or strong fluorescent lighting, near the main unit.
තාක්ෂණික පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | 1262 |
| වෙළඳ නාමය | උපරිම |
| නිෂ්පාදන මානයන් (L x W x H) | 0.79 x 3.94 x 1.77 අඟල් (20 x 100 x 45 මි.මී.) |
| අයිතමයේ බර | අවුන්ස 6.4 (ග්රෑම් 180) |
| බල සැපයුම | AC 230V, DC 5V (USB) |
| AC ඇඩැප්ටරය ඇතුළත් වේ | ඔව් |
| Maximum IR Reception Range | මීටර් 5 කි |
| USB 2.0 port ගණන | 1 (for power) |
| නිෂ්පාදන වර්ණය | කළු |
| වැඩ කරන සංඛ්යාතය | 433.92MHz |
| LED දර්ශක | ඔව් |
| අතුරු මුහුණත | Wireless IR |
| Mounting Set Included | ඔව් |
| Cable Length (Probes) | මීටර් 2 කි |
| Number of Supported Devices | 3 |
| බිල්ට් තිරය | නැත |
| Frequency Range (IR) | 30-60kHz |
| ගැළපෙන උපාංග | IR-controlled devices |
වගකීම් තොරතුරු
සවිස්තරාත්මක වගකීම් නියමයන් සහ කොන්දේසි සඳහා, කරුණාකර නිලධාරියා වෙත යොමු වන්න website of Maximum or the product packaging. It is recommended to retain your proof of purchase for any potential warranty claims.
පාරිභෝගික සහාය
Should you require technical assistance, have questions regarding setup or operation, or need further support, please contact Maximum customer support. Contact details, including phone numbers and email addresses, can typically be found on the manufacturer's official webඅඩවිය හෝ නිෂ්පාදන ලියකියවිලි තුළ.
