1. හැඳින්වීම
The ABUS 58292 Titalium Aluminium Padlock is designed for general security applications, offering a balance of strength and lightweight construction. It features a body made from a special aluminium alloy, a brass cylinder rotor, and a hardened steel shackle. This manual provides essential information for the proper setup, operation, and maintenance of your padlock.
ප්රධාන ලක්ෂණ:
- Lightweight Titalium aluminium alloy body
- Hardened steel shackle for enhanced resistance
- Brass cylinder rotor
- Security level: 6
This image displays the ABUS 58292 Titalium Aluminium Padlock in a silver finish, accompanied by two silver-colored keys. The padlock features the 'ABUS' logo and '54TI/15' engraved on its body, indicating its model and size.
2. පිහිටුවීම
The ABUS 58292 padlock is ready for use directly out of its packaging. No assembly is required.
- ඇසිරීම: Carefully remove the padlock and its keys from the packaging.
- යතුරු හඳුනාගැනීම: Identify the keys provided with your padlock. Each padlock comes with a set of unique keys.
- මූලික පරීක්ෂණය: Insert a key into the keyway and turn it clockwise to ensure the shackle opens smoothly. Turn it counter-clockwise to lock the shackle.
3. මෙහෙයුම් උපදෙස්
Follow these steps to operate your ABUS 58292 padlock:
- අගුළු ඇරීමට:
- Insert the correct key fully into the keyway.
- Turn the key clockwise approximately 90 degrees.
- The shackle will spring open or can be pulled open.
- අගූලු දැමිමට:
- Close the shackle by pushing it down firmly into the padlock body until it clicks into place.
- Turn the key counter-clockwise approximately 90 degrees to secure the shackle.
- Remove the key. Ensure the shackle is fully engaged by attempting to pull it open without the key.
This image shows the ABUS 58292 Titalium Aluminium Padlock held between a thumb and forefinger, illustrating its compact size. Text overlays indicate its dimensions as '1.3 in' and '3 cm', providing a clear visual reference for its small scale.
4. නඩත්තු කිරීම
Proper maintenance will extend the life and ensure the smooth operation of your padlock.
- පිරිසිදු කිරීම: Wipe the padlock body and shackle with a clean, dry cloth periodically to remove dust and dirt. Avoid abrasive cleaners.
- ලිහිසි තෙල්: If the keyway or shackle mechanism becomes stiff, apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway. Avoid oil-based lubricants as they can attract dirt.
- ගබඩා: Store the padlock in a dry environment when not in use to prevent corrosion.
5. දෝශ නිරාකරණය
If you encounter issues with your padlock, consider the following common solutions:
- Key is Stiff or Stuck: Ensure the key is fully inserted. Apply a small amount of lock lubricant into the keyway and try again. Do not force the key.
- Shackle Not Opening/Closing Smoothly: Check for any obstructions around the shackle. Lubricate the shackle mechanism where it enters the padlock body.
- Padlock Appears Corroded: For minor surface corrosion, clean with a soft brush and apply a rust-inhibiting lubricant. If corrosion is severe, the padlock may need replacement.
6. පිරිවිතර
| ගුණාංගය | විස්තර |
|---|---|
| නිෂ්පාදකයා | අපයෝජනය |
| කොටස අංකය | 58292 |
| අයිතම ආදර්ශ අංකය | 58501 |
| නිෂ්පාදන මානයන් (L x W x H) | 1.5 x 1.5 x 2.5 සෙ.මී |
| අයිතමයේ බර | 10 ග්රෑම් |
| ද්රව්ය | ඇලුමිනියම් |
| අවසන් කරන්න | කුඩු ආලේප කර ඇත |
| හැඩය | සෘජුකෝණාස්රාකාර |
| ඇතුළත් සංරචක | යතුර |
| විශේෂ ලක්ෂණ | සැහැල්ලුයි |
| ආරක්ෂක මට්ටම | 6 |
7. වගකීම් සහ සහාය
For detailed warranty information, please refer to the official ABUS website or the documentation provided with your purchase. ABUS products are manufactured to high standards, and specific warranty terms may vary by region and product type.
If you require further assistance or have questions not covered in this manual, please contact ABUS customer support through their official channels.
