Olympus IS 10 Film Camera Instruction Manual

හැඳින්වීම

This manual provides essential instructions for the safe and effective use of your Olympus IS 10 Film Camera. Please read this manual thoroughly before using the camera and keep it in a safe place for future reference. The Olympus IS 10 is a 35mm point-and-shoot film camera featuring a 28-110mm Glass Aspherical AF Zoom Lens and Intelligent Flash.

සැලසුම

1. බැටරි ස්ථාපනය

The Olympus IS 10 requires batteries for operation. Locate the battery compartment cover, typically on the bottom or side of the camera. Open the cover and insert the required batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Close the cover securely.

2. චිත්‍රපට පූරණය

1. Open the camera back cover by sliding the latch, usually located on the side of the camera body.
2. Place a 35mm film cartridge into the film chamber.
3. Pull the film leader across to the film take-up spool, aligning it with the orange mark or insertion point.
4. Close the camera back cover firmly until it clicks shut. The camera will automatically advance the film to the first frame. The frame counter will display '1'.

3. පටි ඇමිණුම

Attach the camera strap to the strap lugs located on the camera body. Ensure the strap is securely fastened to prevent accidental drops.

මෙහෙයුම

1. බලය සක්‍රිය / අක්‍රිය කරන්න

To power on the camera, slide the ON/OFF switch, typically located near the top left of the camera body. To power off, slide the switch back to the OFF position.

Image: Front-top view of the Olympus IS 10 camera, showing the lens, power switch, and some control buttons. The lens is extended, indicating the camera is powered on or ready for use.

2. Focusing and Zooming

The Olympus IS 10 features a 28-110mm autofocus zoom lens. Use the zoom lever, usually located near the shutter button, to adjust the focal length. The camera will automatically focus on your subject when the shutter button is half-pressed.

3. වෙඩි තැබීමේ මාදිලි

The camera offers various shooting modes, including a 'FULL AUTO' mode for simplified operation. Select your desired mode using the mode dial or buttons, typically located on the top right of the camera. Refer to the display for the selected mode.

Image: Rear-top view of the Olympus IS 10 camera, highlighting the control panel with buttons for flash, full auto mode, zoom, and the Quartzdate settings. The LCD display is also visible.

4. Flash Operation

The camera is equipped with an Intelligent Flash. Press the flash button to cycle through different flash modes (e.g., Auto Flash, Red-eye Reduction, Flash Off, Fill-in Flash). The selected mode will be indicated on the camera's display.

5. Shutter Release

To take a picture, compose your shot and gently press the shutter button located on the top of the camera. Pressing halfway will activate autofocus and exposure metering. Pressing fully will release the shutter and capture the image.

6. Quartzdate Function

The Quartzdate function allows you to imprint the date or time onto your photographs. Use the 'MODE' and 'SET' buttons, typically found on the rear of the camera, to adjust the date/time settings and activate/deactivate the imprint function.

රූපය: ඉහළට view of the Olympus IS 10 camera, clearly showing the 'QUARTZDATE' display and its 'MODE' and 'SET' buttons for date imprinting functionality.

7. Film Rewinding and Unloading

Once all frames on the film roll have been exposed, the camera will automatically rewind the film back into its cartridge. Wait for the rewinding process to complete (indicated by a sound or display message), then open the camera back cover and remove the film cartridge.

නඩත්තු කිරීම

1. කැමරාව පිරිසිදු කිරීම

• කැමරා ශරීරය: කැමරා ශරීරය පිස දැමීමට මෘදු, වියළි රෙද්දක් භාවිතා කරන්න. මුරණ්ඩු අපිරිසිදුකම සඳහා, තරමක් dampරෙදි කැබැල්ල වතුරෙන් තෙමී වියළා ගන්න. කාබනික ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න.
• කාච: දූවිලි ඉවත් කිරීම සඳහා කාච බුරුසුවක් හෝ පිඹින යන්ත්‍රයක් භාවිතා කරන්න. පැල්ලම් සඳහා, විශේෂිත කාච පිරිසිදු කිරීමේ රෙදි සහ කාච පිරිසිදු කිරීමේ තරලයක් භාවිතා කරන්න. ඔබේ ඇඟිලිවලින් කාච මතුපිට ස්පර්ශ නොකරන්න.
• Film Chamber: Keep the film chamber clean and free of dust or debris, which can scratch film. Use a blower brush if necessary.

2. බැටරි රැකවරණය

Remove batteries if the camera will not be used for an extended period to prevent leakage. Store batteries in a cool, dry place. Dispose of used batteries responsibly according to local regulations.

3. ගබඩා කිරීම

Store the camera in a cool, dry, and well-ventilated place, away from direct sunlight, high temperatures, high humidity, and strong magnetic fields. Use a desiccant if storing in humid environments.

දෝෂගවේෂණය

• කැමරාව ක්‍රියාත්මක නොවේ: Check if the batteries are inserted correctly and are not depleted. Replace with fresh batteries if necessary.
• ෆ්ලෑෂ් දැල්වෙන්නේ නැත: Ensure the flash mode is not set to 'Flash Off'. Check battery level. In some low-light conditions, the flash may not fire if the camera determines sufficient ambient light.
• Pictures are out of focus: Ensure the subject is within the camera's focusing range. Half-press the shutter button to allow the camera to focus before fully pressing. Avoid shooting through dirty or smudged lenses.
• Film does not advance/rewind: Check if the film is loaded correctly. Ensure the camera back is securely closed. If the issue persists, the film may be jammed or the camera may require servicing.
• දර්ශනය වන දෝෂ පණිවිඩය: Consult the camera's display for specific error codes or messages. If the message is not clear, try turning the camera off and on again.

මෙහි ආවරණය නොවූ ගැටළු ඔබට දිගටම ඇති වුවහොත්, කරුණාකර සහාය අංශය වෙත යොමු වන්න.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Olympus provides customer support for their products. For technical assistance, service, or further inquiries, please visit the official Olympus webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

Note: This manual is for informational purposes. Product features and specifications are subject to change without notice.