1. හැඳින්වීම
The Everbilt 1/6 HP Submersible Utility Pump (Model UT00801) is engineered for efficient water removal from various locations. This pump is ideal for draining sinks, tubs, and shallow flooded areas such as basements, floors, and flat roofs. Its submersible design allows it to operate directly in water, effectively reducing water levels down to 1/8 inch.
This manual provides essential information for the safe and effective use of your Everbilt utility pump. Please read all instructions carefully before installation and operation.
රූපය 1: Everbilt 1/6 HP Submersible Utility Pump. This image displays the main unit of the pump, highlighting its compact, black plastic housing, the threaded discharge port, and the power cord connection point. A separate threaded adapter is also visible.
2 ආරක්ෂිත තොරතුරු
Always prioritize safety when operating electrical equipment, especially near water. Failure to follow these safety guidelines can result in electric shock, fire, personal injury, or property damage.
- විදුලි ආරක්ෂාව: Ensure the pump is connected to a properly grounded outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for outdoor use and wet conditions. Never operate the pump with damaged cords or plugs.
- Submersible Use Only: This pump is designed for submersible operation. Do not run the pump dry, as this can cause severe damage to the motor.
- ජල උෂ්ණත්වය: Do not use this pump with water temperatures exceeding 104°F (40°C).
- දැවෙනසුළු ද්රව: Never pump flammable or corrosive liquids. This pump is intended for water only.
- ළමුන් සහ සුරතල් සතුන්: Keep children and pets away from the pump and any standing water during operation.
- නඩත්තු: Always disconnect power before performing any maintenance or cleaning on the pump.
3. පැකේජ අන්තර්ගතය
ඇසුරුම් ඉවත් කිරීමේදී සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න.
- Everbilt 1/6 HP Submersible Utility Pump (Model UT00801)
- Threaded Hose Adapter
- උපදෙස් අත්පොත
4. පිහිටුවීම
- විසර්ජන හෝස් එක අමුණන්න: Connect a standard garden hose or a suitable discharge pipe to the pump's threaded outlet. The pump includes a removable adapter to accommodate different hose sizes. Ensure a secure, leak-free connection.
- පොම්පය ස්ථානගත කරන්න: Place the pump on a stable, level surface in the area to be drained. Ensure the intake screen at the bottom of the pump is clear of debris. The pump must be fully submerged in water for proper operation and cooling.
- Route Discharge Hose: Extend the discharge hose to a suitable drainage area, ensuring the water will not flow back into the area being drained. Avoid kinks or sharp bends in the hose that could restrict water flow.
- බල සම්බන්ධතාවය: Plug the pump's power cord into a grounded 120V AC electrical outlet. The pump will begin operating immediately upon connection to power.
5. මෙහෙයුම් උපදෙස්
The Everbilt 1/6 HP Submersible Utility Pump is designed for continuous operation once plugged in, provided it remains submerged.
- ස්වයංක්රීය ක්රියාකාරිත්වය: This model operates continuously when plugged in. There is no on/off switch on the unit itself. Operation starts when power is supplied and stops when power is disconnected.
- ජල මට්ටම: The pump is capable of removing water down to a minimum level of approximately 1/8 inch. For optimal performance, ensure the pump remains submerged during operation.
- අධීක්ෂණය: Periodically check the pump's operation and the discharge area to ensure proper water flow and prevent accidental flooding.
- විසන්ධි කිරීම: පොම්පය නැවැත්වීමට, එය විදුලි අලෙවිසැලෙන් විසන්ධි කරන්න.
6. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ පොම්පයේ ආයු කාලය සහ කාර්යක්ෂම ක්රියාකාරිත්වය සහතික කරයි.
- Cleaning Intake Screen: Regularly inspect and clean the intake screen at the bottom of the pump to prevent blockages from debris, which can reduce pumping efficiency.
- ගබඩා: When not in use, clean the pump thoroughly and store it in a dry, frost-free location. Drain any remaining water from the pump and hose to prevent freezing damage.
- පරීක්ෂාව: Before each use, inspect the power cord, plug, and pump housing for any signs of damage. Do not use the pump if any damage is observed.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පොම්පය ආරම්භ නොවේ | No power; tripped circuit breaker; damaged cord/plug | Check power supply; reset breaker; inspect and replace damaged components. |
| පොම්පය ක්රියාත්මක වන නමුත් ජලය පොම්ප නොකරයි | Intake screen clogged; air lock; discharge hose kinked/blocked; pump not submerged | Clean intake screen; prime pump by submerging fully; clear hose; ensure pump is fully submerged. |
| ජල ප්රවාහය අඩු වීම | Partial blockage in intake or hose; low voltage | Clean intake screen and hose; ensure stable power supply. |
| Pump cycles on and off rapidly | Insufficient water level; air in system | Ensure adequate water level for continuous operation; check for air leaks in connections. |
If troubleshooting steps do not resolve the issue, contact Everbilt customer support for assistance.
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | එවර්බිල්ට් |
| ආදර්ශ අංකය | UT00801 |
| අශ්වබල | 1 / 6 HP |
| ප්රවාහ අනුපාතය | Up to 28 Gallons Per Minute (GPM) |
| උපරිම එසවුම් උස | 0.13 Inches (Note: This value likely refers to the minimum water level the pump can achieve, not its maximum lift height.) |
| අවම ජල මට්ටම | 1/8 inch (approx.) |
| අයිතමයේ බර | පවුම් 5.71ක් |
| නිෂ්පාදන මානයන් | අඟල් 7.68 x 6.89 x 10.63 |
| බලශක්ති ප්රභවය | AC/DC (Standard 120V AC for typical use) |
| ද්රව්ය | ප්ලාස්ටික් |
| ශෛලිය | ගිල්විය හැකි |
9. වගකීම් සහ සහාය
The Everbilt 1/6 HP Submersible Utility Pump comes with a වසර 1ක සීමිත වගකීමක්. For warranty claims, technical support, or replacement parts, please contact Everbilt customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, refer to the official Everbilt webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සහාය රේඛාව අමතන්න.
