RUPES LHR75E සසම්භාවී කක්ෂීය පොලිෂර් උපදෙස් අත්පොත

හැඳින්වීම

The RUPES LHR 75E Random Orbital Polisher is engineered for precision detailing, allowing users to achieve perfect results even in challenging areas. Its ergonomic design and 12 mm orbit are ideal for spot repair operations and intricate surfaces like mudguards and front panels, ensuring comfortable handling and accuracy in polishing tasks.

ප්රධාන ලක්ෂණ ඇතුළත් වේ:

• Ergonomically perfect shape with non-slip rubber inserts for comfort and control.
• Non-slip rubber on/off lever for controlled soft start.
• Electronic speed control module for easy adjustment during operation.
• Powerful 400 watt motor with an 18AWG USA polarized 4mt plug.
• Made in Italy, ensuring high-quality craftsmanship.

පෙට්ටියේ ඇති දේ

Upon unboxing your RUPES LHR75E Random Orbital Polisher, you should find the following components:

• RUPES LHR75E Polisher Unit
• පිටුබලය තහඩුව

සැලසුම

Before operating your RUPES LHR75E polisher, ensure proper setup for safety and optimal performance.

1. ඒකකය පරීක්ෂා කරන්න: Check the polisher for any visible damage or loose parts. Ensure the power cord is intact.
2. පසුබිම් තහඩුව අමුණන්න: Securely attach the appropriate backing plate to the polisher's spindle.
3. Select and Attach Polishing Pad: Choose the correct polishing pad (foam or microfiber) for your task. Ensure it is clean and free of debris. Align the pad with the backing plate and firmly press it into place using the hook-and-loop system.
4. සම්බන්ධක බලය: Plug the 18AWG USA polarized 4mt power cord into a suitable electrical outlet.

Figure 1: RUPES LHR75E Polisher with attached power cord.

රූපය 2: ඉහළ view of the RUPES LHR75E, highlighting the 'Bigfoot mini 12' branding and ergonomic design.

මෙහෙයුම් උපදෙස්

Follow these steps for effective and safe operation of your RUPES LHR75E polisher.

1. මතුපිට සකස් කරන්න: Ensure the vehicle surface is clean, dry, and free of contaminants. Mask off any trim or areas not to be polished.
2. සංයෝග/පෝලන්ත යොදන්න: Apply a small amount of polishing compound or polish directly onto the pad.


Figure 3: Applying polishing compound to the pad before use.

3. වේගය සකසන්න: Use the electronic speed control module to select the desired speed setting. Start with a lower speed to spread the product, then increase as needed for correction.

Figure 4: Electronic speed control dial for precise adjustment.
4. ඔප දැමීම ආරම්භ කරන්න: Place the pad flat on the surface before turning on the polisher. Use the non-slip rubber on/off lever for a controlled soft start.
5. තාක්ෂණය: Work in small sections (e.g., 2x2 feet). Apply light to moderate pressure and move the polisher in overlapping passes (cross-hatch pattern). Maintain consistent speed and pressure.


Figure 5: Polishing a car panel with the RUPES LHR75E.



Figure 6: The compact size of the LHR75E allows for precise work on smaller, intricate areas like side mirrors.

6. Wipe Off Residue: After polishing a section, turn off the polisher, lift it from the surface, and wipe off any residue with a clean microfiber towel.

Helpful Video Resources

නඩත්තු කිරීම

Regular maintenance ensures the longevity and optimal performance of your RUPES LHR75E polisher.

• පිරිසිදු පෑඩ්: After each use, clean polishing pads thoroughly to remove compound residue. Allow them to air dry completely.
• Wipe Down Polisher: Wipe the polisher body with a clean, damp cloth to remove any dust or polish splatter.
• ලණුව පරීක්ෂා කරන්න: Periodically check the power cord for cuts, fraying, or damage. Replace if necessary.
• නිසි ලෙස ගබඩා කරන්න: Store the polisher in a clean, dry place, away from extreme temperatures and direct sunlight.

දෝෂගවේෂණය

If you encounter issues with your RUPES LHR75E polisher, refer to the following common troubleshooting tips:

• Polisher Not Turning On:
  • විදුලි රැහැන ආරක්ෂිතව වැඩ කරන අලෙවිසැලකට සම්බන්ධ කර ඇති බවට සහතික වන්න.
  • Check the on/off lever for proper engagement.
• අධික කම්පනය/ශබ්දය:
  • Ensure the backing plate and polishing pad are securely attached and centered.
  • Check the pad for uneven wear or damage. Replace if necessary.
• Poor Polishing Performance:
  • Ensure the correct pad and compound are being used for the task.
  • Adjust the speed setting as appropriate for the product and surface condition.
  • Clean or replace clogged pads.

පිරිවිතර

වගකීම් සහ සහාය

The RUPES LHR75E Random Orbital Polisher comes with a වසර 1ක නිෂ්පාදකයාගේ වගකීමක්. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official RUPES webඅඩවිය.