ABB EQ B23 112-100 Energy Meter Instruction Manual

1. හැඳින්වීම සහ අවසන්view

This manual provides instructions for the installation, operation, and maintenance of the ABB EQ B23 112-100 Energy Meter. This electronic meter is designed for accurate measurement of electrical energy in industrial and residential applications, facilitating energy management and cost analysis. It features an infrared (IR) interface for data communication with external systems.

The ABB EQ B23 112-100 is a calibrated electronic meter, suitable for direct execution of energy power measurements. It is built for reliability and precision in various electrical testing environments.

2 ආරක්ෂිත තොරතුරු

වැදගත්: Read all safety instructions before installation or operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ස්ථාපනය සහ නඩත්තුව සිදු කළ යුත්තේ සුදුසුකම් ලත් පුද්ගලයින් විසින් පමණි.
• Ensure the power supply is disconnected before performing any wiring or installation procedures.
• Verify all connections are secure and correct according to wiring diagrams.
• උපාංගය හානි වී ඇති බව පෙනේ නම් එය ක්‍රියාත්මක නොකරන්න.
• සියලුම දේශීය සහ ජාතික විදුලි කේත නිරීක්ෂණය කරන්න.

3. නිෂ්පාදන ලක්ෂණ

• Electronic meter type for precise energy measurement.
• Rated current: 5 A.
• Maximum current (IMAX): 65 A.
• නාමික වෙළුමtage (N-L): 176 V to 276 V.
• නාමික වෙළුමtage (L-L): 400 V.
• Infrared (IR) interface for data communication.
• Accuracy class B.
• Designed for DIN rail mounting.

4. පිහිටුවීම සහ ස්ථාපනය

The ABB EQ B23 112-100 Energy Meter is designed for DIN rail mounting. Ensure the mounting location is dry, well-ventilated, and free from excessive vibration or extreme temperatures.

4.1 Mounting the Meter

1. Ensure the DIN rail is securely installed in the desired location.
2. Align the meter's rear mounting clip with the DIN rail.
3. Press the meter firmly onto the rail until it clicks into place.

රූපය 1: පසුපස view of the meter, illustrating the integrated DIN rail mounting clip. This clip allows for easy and secure attachment to standard DIN rails.

4.2 රැහැන් සම්බන්ධතා

අවවාදයයි: Disconnect all power before making any electrical connections. Refer to the wiring diagram provided with the product for specific connection details. The meter supports both single-phase and three-phase connections.

• Connect the incoming phase (L1, L2, L3) and neutral (N) wires to the designated terminals.
• Connect the outgoing load wires to the corresponding terminals.
• Ensure all terminal screws are tightened to the specified torque to prevent loose connections.
• The meter also includes terminals for pulse output and an infrared interface for communication.

රූපය 2: පහළ view of the meter, showing the main power input/output terminals and auxiliary connections. These terminals are clearly labeled for correct wiring.

රූපය 3: ඉහළ view of the meter, displaying additional terminals for phase connections (L1, L2, L3) and neutral (N). Proper connection to these terminals is crucial for accurate measurement.

5. මෙහෙයුම් උපදෙස්

Once installed and powered, the meter will automatically begin measuring energy consumption. The front display provides real-time data and allows for basic interaction.

5.1 සංදර්ශකය සහ බොත්තම්

රූපය 4: ඉදිරිපස view of the meter, highlighting the digital display and control buttons. The display shows various measurement parameters, and the buttons allow navigation through menus.

• සංදර්ශකය: Shows energy consumption (kWh), voltage, current, power, and other parameters.
• සංචාලන බොත්තම්: Use the arrow buttons (left/right or up/down, depending on model) to scroll through different display parameters.
• හරි බොත්තම: Typically used to confirm selections or enter sub-menus.

5.2 Infrared (IR) Interface

The meter is equipped with an infrared interface on its left side. This interface allows for communication with external devices, such as communication adapters or energy management systems (e.g., KNX), for data retrieval and configuration. Consult the specific communication adapter's manual for details on connecting and utilizing the IR interface.

රූපය 5: පැත්ත view of the meter, indicating the location of the infrared (IR) communication interface. This port enables data exchange with compatible external devices.

6. නඩත්තු කිරීම

The ABB EQ B23 112-100 Energy Meter is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents.
• පරීක්ෂාව: Periodically inspect wiring connections for tightness and signs of wear or damage.
• ක්රමාංකනය: The meter is factory calibrated. Recalibration should only be performed by authorized service personnel if accuracy issues are suspected. The calibration date is visible on the device (e.g., "Calibrated 2023-02-10").

7. දෝශ නිරාකරණය

If you encounter issues with your energy meter, consider the following common troubleshooting steps:

• සංදර්ශකය නැත: Check the power supply connections. Ensure the circuit breaker is on.
• වැරදි කියවීම්: Verify all wiring connections are correct according to the installation diagram. Ensure the meter is correctly configured for the electrical system (e.g., single-phase or three-phase).
• සන්නිවේදන ගැටළු: Ensure the IR communication adapter is correctly aligned with the meter's IR port and that its drivers/software are properly installed on the connected system.
• For persistent issues, contact ABB technical support.

8. පිරිවිතර

9. වගකීම් සහ සහාය

වගකීම් තොරතුරු සහ තාක්ෂණික සහාය සඳහා, කරුණාකර නිල ABB වෙත යොමු වන්න. website or contact your local ABB representative. Keep your purchase receipt and product serial number (visible on the device, e.g., 01774274) for any support inquiries.

ඔබට සංචාරය කළ හැකිය ඇමේසන් හි ABB වෙළඳසැල වැඩි නිෂ්පාදන තොරතුරු සඳහා.