හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 PRO-DKH1 2-inch Compression Driver with Aluminum Horn. Please read this manual thoroughly before using the product to ensure proper function and longevity.
නිෂ්පාදන විශේෂාංග
- 2-Inch Competition Compression Driver: Designed for high-quality audio performance, featuring a titanium diaphragm, mylar capacitor crossover, and an aluminum horn.
- උපරිම බලය හැසිරවීම: Capable of handling up to 640W maximum power and 320W program power, delivering robust audio output.
- High-Quality Magnets: Equipped with a 35 oz Ferrite magnet for a wide range of tones and high-volume power handling.
- Integrated Aluminum Horn: Includes a durable aluminum horn, ensuring optimal sound dispersion and aesthetic integration.
- කල් පවතින කාර්ය සාධනය: Engineered for long-lasting performance without excessive power draw from your ampජීවිතාරක්ෂකයා.
පිරිවිතර
| ආකෘතිය | PRO-DKH1 |
| ටයිප් කරන්න | සම්පීඩන ධාවකය |
| ආර්එම්එස් බලය | 600W |
| MAX බලය | 1000W |
| සංවේදීතාව | 108dB |
| Voice Coil ප්රමාණය | 2.03" |
| සම්බාධනය | 8 ඕම් |
| සංඛ්යාත ප්රතිචාරය | 800Hz - 18.5KHz |
| ප්රාචීරය ද්රව්ය | ටයිටේනියම් |
| Horn Material | ඇලුමිනියම් |
| චුම්බක බර | 35oz |
| Horn Dimensions | 157 x 157 x 132mm (6"D x 6"W x 7.75"H) |
| උගුරේ විෂ්කම්භය | 2" |
| සමස්ත ගැඹුර | 123මි.මී. / 4.84" |
| අයිතමයේ බර | පවුම් 7ක් |
| ඇතුළත් සංරචක | Aluminum Horn |
සැකසුම සහ ස්ථාපනය
ප්රශස්ත කාර්ය සාධනය සහ ආරක්ෂාව සඳහා නිසි ස්ථාපනය ඉතා වැදගත් වේ. සුදුසුකම් ලත් වෘත්තිකයෙකු විසින් ස්ථාපනය සිදු කිරීම නිර්දේශ කෙරේ.
සවි කිරීම
- Ensure the mounting surface is sturdy enough to support the weight of the compression driver (7 pounds).
- Refer to the product dimensions (6"D x 6"W x 7.75"H) and throat diameter (2") to prepare the mounting hole.
- Secure the compression driver using appropriate fasteners through the mounting holes on the horn.
රැහැන් ඇදීම
- Connect the positive (+) terminal of the compression driver to the positive output of your ampජීවිතාරක්ෂකයා.
- Connect the negative (-) terminal of the compression driver to the negative output of your ampජීවිතාරක්ෂකයා.
- කෙටි පරිපථ වැළැක්වීම සඳහා සියලුම සම්බන්ධතා ආරක්ෂිතව සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
- It is recommended to use a high-pass filter (HPF) to protect the driver from low frequencies. A crossover that cuts frequencies below 800Hz is ideal for this unit.
Figure 1: DS18 PRO-DKH1 Compression Driver with Aluminum Horn.
Figure 2: Technical drawing showing dimensions and a frequency response graph for the PRO-DKH1.
මෙහෙයුම් උපදෙස්
The DS18 PRO-DKH1 is designed to reproduce high frequencies with clarity and power. Follow these guidelines for optimal operation:
- ඔබේ amplifier is properly matched to the 8 Ohm impedance of the driver.
- Avoid exceeding the recommended RMS power of 600W to prevent damage.
- Use a high-pass filter (HPF) to prevent low-frequency signals from reaching the driver, which can cause distortion and damage.
- Gradually increase volume levels to prevent sudden peaks that could harm the driver or your hearing.
නඩත්තු කිරීම
Regular maintenance helps ensure the longevity and performance of your compression driver.
- පිරිසිදු කිරීම: Use a soft, dry cloth to wipe down the horn and driver body. Avoid using harsh chemicals or abrasive materials.
- පරීක්ෂාව: තද බව සහ ගෙවී යාමේ හෝ විඛාදනයට ලක්වීමේ සලකුණු සඳහා සියලුම රැහැන් සම්බන්ධතා වරින් වර පරීක්ෂා කරන්න.
- පරිසරය: Keep the driver in a dry environment, away from direct sunlight and extreme temperatures.
දෝෂගවේෂණය
If you experience issues with your DS18 PRO-DKH1, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ශබ්දයක් නැත | Loose wiring, incorrect connections, amplifier off, damaged voice coil. | Check all wiring, ensure correct polarity, verify amplifier power, inspect voice coil for damage. |
| විකෘති ශබ්දය | Overpowering, improper crossover settings, damaged diaphragm. | අඩු කරන්න amplifier gain, verify HPF settings, inspect diaphragm for tears or creases. |
| අඩු ප්රතිදානය | Incorrect impedance matching, low amplifier power, phase issues. | සහතික කරන්න amplifier matches 8 Ohm impedance, check amplifier output, verify speaker phase. |
If problems persist, contact DS18 customer support or a qualified audio technician.
Product Demonstration (Related Model)
Video 1: Demonstration of the DS18 PRO-DRNSC1.5DK Neodymium Driver. While not the exact PRO-DKH1 model, this video provides a general overview and sound test of a related DS18 compression driver.
වගකීම් සහ සහාය
The DS18 PRO-DKH1 Compression Driver comes with a සීමිත වගකීම්. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 webඅඩවිය.
For technical support, service, or further inquiries, please contact DS18 customer service through their official channels. Keep your purchase receipt and product model number (PRO-DKH1) handy when contacting support.
