TC Electronic Alter Ego V2 Vintage Delay and Looper Pedal User Manual

හැඳින්වීම

The TC Electronic Alter Ego V2 Vintage Delay and Looper Pedal is designed to provide a wide array of classic echo and delay effects, along with a looper function. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal to ensure optimal performance and longevity.

සැලසුම

බල සම්බන්ධතාවය

The Alter Ego V2 requires a 9V DC power supply, center negative, with a minimum current draw of 100mA. Ensure you use a compatible power adapter to prevent damage to the unit. Connect the power adapter to the 9V DC input jack on the pedal.

ශ්රව්ය සම්බන්ධතා

• ඔබේ උපකරණය (උදා: ගිටාරය) සම්බන්ධ කරන්න ආදානය සම්මත 1/4-අඟල් උපකරණ කේබලයක් භාවිතයෙන් පැඩලයේ දකුණු පැත්තේ ජැක් එක තද කරන්න.
• සම්බන්ධ කරන්න ප්‍රතිදානය පැඩලයේ වම් පැත්තේ ජැක් එක ඔබේ පැත්තට ampසම්මත අඟල් 1/4 උපකරණ කේබලයක් භාවිතයෙන් ඔබේ සංඥා දාමයේ ලිෆයර් හෝ ඊළඟ පැඩලය.
• For stereo operation, connect a second cable from the ස්ටීරියෝ ප්‍රතිදානය jack to a second amplifier or stereo input device.

පැඩලය ක්‍රියාත්මක කිරීම

Familiarize yourself with the controls and connections of your Alter Ego V2 pedal. The following image illustrates the layout of the pedal's controls.

රූපය 1: Front panel of the TC Electronic Alter Ego V2 pedal, showing the three main control knobs (Time, Feedback, Level), the 11-position delay type selector knob, two mini-toggle switches, and the footswitch.

පාලනය කරයිview

• ටයිම් බොත්තම: Adjusts the delay time, from short slap-back echoes to long, atmospheric repeats.
• ප්‍රතිපෝෂණ බොත්තම: Controls the number of repeats. Turn clockwise for more repeats, counter-clockwise for fewer.
• මට්ටමේ බොත්තම: Sets the volume of the delayed signal.
• DELAY TYPE Selector Knob: This 11-position rotary switch allows you to select between various vintage delay models and the TonePrint (TP) slot. The available types include:
  • REV M: Reverse Delay with Modulation
  • BDM2: Binson Echorec 2 emulation
  • CKAT: Copicat Tape Echo emulation
  • 2290 M: TC Electronic 2290 Digital Delay with Modulation
  • EP1: Echoplex EP-1 emulation
  • පොලිස් අධිකාරී: Space Echo emulation
  • T ORG: Tel-Ray Organ Tone emulation
  • LP: Looper කාර්යය
  • DMM C: Deluxe Memory Man Chorus emulation
  • EREC2: Echorec 2 emulation (another variant)
  • TP: TonePrint slot for custom delay sounds
• Mini-Toggle Switches: Two small switches located between the main knobs. These typically control additional parameters such as modulation depth, subdivision, or other specific characteristics depending on the selected delay type. Refer to the official TC Electronic website for detailed descriptions of each switch's function per delay type.
• පා මාරුව: Engages or bypasses the effect. In Looper mode, it controls recording, playback, and overdubbing.

TonePrint Functionality

The Alter Ego V2 supports TC Electronic's TonePrint technology. This allows you to beam custom-tuned delay sounds created by famous guitarists or design your own using the free TonePrint Editor software. To use TonePrint:

1. Download the TonePrint App for your smartphone or the TonePrint Editor for your computer from the TC Electronic webඅඩවිය.
2. Select the 'TP' position on the DELAY TYPE selector knob.
3. Follow the instructions in the app or software to load a TonePrint into your pedal.

ලූපර් මෙහෙයුම

When the DELAY TYPE selector is set to 'LP', the pedal functions as a looper. The footswitch controls the looping functions:

• තනි මුද්‍රණ යන්ත්‍රය: Start recording a loop.
• Single Press (while recording): Stop recording and start playback.
• Double Press (while playing): නැවත ධාවනය නවත්වන්න.
• Press and Hold (while playing): Undo/Redo last overdub.
• Press and Hold (while stopped): Clear the loop.

නඩත්තු කිරීම

The Alter Ego V2 pedal is designed for durability. To ensure its longevity:

• මෘදු වියළි රෙද්දකින් පිස දැමීමෙන් පැඩලය පිරිසිදුව තබා ගන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න.
• අධික උෂ්ණත්වයන්, ආර්ද්‍රතාවය සහ සෘජු හිරු එළියෙන් පැඩලය ආරක්ෂා කරන්න.
• පැඩලය බිම හෙළීමෙන් හෝ දැඩි බලපෑම්වලට ලක් කිරීමෙන් වළකින්න.
• Ensure all cables are connected securely but do not overtighten.

දෝෂගවේෂණය

If you encounter issues with your Alter Ego V2 pedal, consider the following:

• ශබ්දයක් නැත: සියලුම කේබල් සම්බන්ධතා පරීක්ෂා කරන්න (උපකරණය, amplifier, power). Ensure the power supply is correctly connected and providing the correct voltage (9V DC).
• අනපේක්ෂිත හැසිරීම: Ensure the correct delay type is selected. If using TonePrint, verify the TonePrint was loaded correctly. Try resetting the pedal by disconnecting and reconnecting power.
• ශබ්දය/හම්: Ensure you are using a regulated power supply. Check for ground loops in your signal chain.
• TonePrint Editor Connectivity Issues: Refer to the support section of the TC Electronic website for the latest drivers and troubleshooting guides for the TonePrint Editor software.

For further assistance, consult the official TC Electronic support resources.

පිරිවිතර

වගකීම් තොරතුරු

TC Electronic products are covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your Alter Ego V2 pedal, please refer to the official warranty statement available on the TC Electronic webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සහාය සෘජුවම අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

සහාය

For the latest product information, firmware updates, TonePrint Editor software, and comprehensive support resources, please visit the official TC Electronic webඅඩවිය:

www.tcelectronic.com

You can also find FAQs, user forums, and contact information for technical support on their webඅඩවිය.