1. හැඳින්වීම
This manual provides comprehensive instructions for the installation, operation, and maintenance of your 1byone OUSQH-0535 Easy Chime Wireless Doorbell Kit. This kit includes two plug-in receivers and one push button, designed to provide a reliable and convenient notification system for your home or office. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. පැකේජ අන්තර්ගතය
ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:
- 2 x 1byone Plug-in Receivers
- 1 x 1byone Wireless Push Button
- 1 x AAA Battery (pre-installed in push button)
- සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු සහ ඇලවුම් පටි)
Figure 2.1: Complete 1byone Wireless Doorbell Kit
3. නිෂ්පාදන ලක්ෂණ
- විස්තීරණ රැහැන් රහිත පරාසය: Operates up to 100 meters (300 feet) in open areas, ensuring reliable signal transmission throughout most homes.
- Multiple Chime Tones: Offers 36 selectable CD-quality melodies.
- වෙනස් කළ හැකි පරිමාව: Three volume levels ranging from 25dB to 85dB.
- දෘශ්ය ඇඟවීම: Integrated LED flash provides a visual notification, beneficial for the hearing impaired or noisy environments.
- Weatherproof Push Button: IP44 rated for outdoor use, protecting against dust and splashing water.
- පුළුල් කළ හැකි පද්ධතිය: Supports adding additional 1byone chimes or push buttons.
- පහසු ස්ථාපනය: Simple plug-and-play setup for receivers and flexible mounting options for the push button.
Figure 3.1: Wireless Range Illustration
4. සංරචක හඳුනා ගැනීම
4.1. Plug-in Receiver
Figure 4.1: Receiver Controls and Features
- Sound/LED Flash Switch: Toggles between sound only, LED flash only, or sound and LED flash modes.
- ප්ලග්: For connecting to a standard electrical outlet.
- ශබ්ද ගැලපුම: Cycles through three volume levels (low, medium, high).
- Melody Selector: Cycles through the 36 available chime melodies.
- Auto-learning Code Button: Used for pairing the receiver with a push button.
4.2. Wireless Push Button
Figure 4.2: Wireless Push Button
- ඔබන බොත්තම: Activates the doorbell chime.
- LED දර්ශකය: Illuminates when the button is pressed, confirming signal transmission.
- බැටරි මැදිරිය: Located on the back, houses the AAA battery.
5. පිහිටුවීම
5.1. තල්ලු බොත්තම ස්ථාපනය කිරීම
- බැටරි ස්ථාපනය: The push button comes with a pre-installed AAA battery. If replacement is needed, carefully open the back cover to access the battery compartment. Ensure correct polarity.
- සවිකරන ස්ථානය: Choose a flat, vertical surface near your door. Ensure the location is easily accessible to visitors and within the wireless range of your receivers.
- සවි කිරීමේ විකල්ප:
- ඇලවුම් පටි: Peel off the protective film from the included double-sided adhesive tape and firmly press the push button onto the desired surface for at least 30 seconds.
- ඉස්කුරුප්පු: Use the provided screws and wall anchors to securely fasten the push button to the wall. It is recommended to apply a small amount of silicone sealant around the screw holes on the back of the button to enhance weather resistance.
5.2. Installing the Receivers
- Select a standard electrical outlet in a central location within your home or in areas where you wish to hear the chime.
- Plug the receiver directly into the electrical outlet. The receiver will power on.
- Repeat for the second receiver in another desired location.
5.3. Pairing the Push Button with Receivers (Auto-Learning)
The push button and receivers are typically pre-paired at the factory. If they do not work out of the box, or if you wish to add additional push buttons/receivers, follow these steps:
- Plug the receiver into an electrical outlet.
- ඔබා අල්ලාගෙන සිටින්න ස්වයංක්රීය ඉගෙනුම් කේත බොත්තම on the receiver for approximately 5 seconds until the receiver emits a 'ding' sound and its LED indicator flashes. This indicates it is in pairing mode.
- Immediately press the wireless push button. The receiver will chime, confirming successful pairing.
- Test the pairing by pressing the push button. The receiver should chime.
- Repeat this process for any additional receivers you wish to pair with the same push button.
6. මෙහෙයුම
6.1. තනු වෙනස් කිරීම
To select a different melody:
- ඔබන්න Melody Selector button on the side of the receiver. Each press will cycle to the next available melody.
- ඔබට අවශ්ය තනුව ඇසෙන විට ඔබන්න නවත්වන්න. තෝරාගත් තනුව සුරැකෙනු ඇත.
6.2. පරිමාව සකස් කිරීම
To change the volume level:
- ඔබන්න පරිමාව ගැලපීම button on the side of the receiver. Each press will cycle through the three available volume levels (low, medium, high).
- Select the volume level that best suits your environment.
6.3. Sound and LED Flash Modes
To switch between notification modes:
- භාවිතා කරන්න Sound/LED Flash Switch on the side of the receiver.
- Toggle the switch to select sound only, LED flash only, or both sound and LED flash.
7. නඩත්තු කිරීම
7.1. තල්ලු බොත්තම් බැටරි ප්රතිස්ථාපනය
When the push button's LED indicator no longer illuminates or the signal becomes unreliable, it's time to replace the battery.
- Carefully open the back cover of the push button. Note that the cover may be tight to ensure weather resistance.
- Remove the old AAA battery.
- Insert a new AAA battery, ensuring correct positive (+) and negative (-) polarity.
- පසුපස කවරය ආරක්ෂිතව වසා දමන්න.
- Test the push button with the receivers to confirm functionality.
7.2 පිරිසිදු කිරීම
To clean the doorbell components, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse any part in water.
8. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Receiver does not chime. | ග්රාහකය ක්රියාත්මක කර නැත. Push button battery low/dead. යුගල කර නැත. පරාසය ඉක්මවා ඇත. | Ensure receiver is plugged into a live outlet. Replace push button battery. Re-pair the push button and receiver (Section 5.3). Move receiver closer to push button. |
| Doorbell chimes randomly. | අනෙකුත් රැහැන් රහිත උපාංග වලින් ඇතිවන බාධා. පාරිසරික සාධක. | Re-pair the push button and receiver to reset the code (Section 5.3). Ensure no other strong radio frequency devices are directly adjacent to the doorbell components. |
| Receiver loses pairing after power cut. | Temporary power interruption. | Re-pair the push button and receiver (Section 5.3). |
| Push button difficult to open for battery replacement. | Tight seal for weather protection. | Use a small, flat tool to gently pry open the cover. Exercise caution to avoid damage. |
| Sound quality not as expected. | Subjective perception. Speaker limitations. | While the system offers 36 melodies, sound quality can vary. Ensure volume is set appropriately. |
9. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| මාදිලියේ නම | OUSQH-0535 |
| වෙළඳ නාමය | 1කෙනෙක් |
| වර්ණය | කළු |
| ද්රව්ය | Metal (components may include plastic) |
| රැහැන් රහිත පරාසය | මීටර් 100 (අඩි 300) දක්වා |
| තනු | 36 තෝරාගත හැක |
| වෙළුම් මට්ටම් | 3 (25dB to 85dB) |
| බොත්තම් ශ්රේණිගත කිරීම | IP44 (කාලගුණ ආරක්ෂිත) |
| තල්ලු බොත්තම් බැටරිය | 1 x AAA (ඇතුළත්) |
| ලබන්නා බලය | AC Plug-in (Voltage: 12V, Power Consumption: <5W) |
| අයිතමයේ බර | ආසන්න වශයෙන් අවුන්ස 7.8 (රාත්තල් 0.49) |
| නිෂ්පාදන මානයන් | Receivers: 4.72 x 3.15 x 4.72 inches Push Button: 3.42 x 1.38 inches (approx.) |
රූපය 9.1: නිෂ්පාදන මානයන්
10 ආරක්ෂිත තොරතුරු
- Do not expose the push button to extreme temperatures or direct sunlight for prolonged periods.
- Ensure receivers are plugged into easily accessible outlets for quick disconnection if needed.
- Do not attempt to disassemble or repair the product yourself. Refer all servicing to qualified personnel.
- බැටරි ළමයින්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න. භාවිතා කළ බැටරි දේශීය රෙගුලාසි වලට අනුව බැහැර කරන්න.
- Avoid placing receivers near strong electromagnetic fields, which may interfere with operation.
11. වගකීම් සහ සහාය
For warranty information or technical support, please contact 1byone customer service through their official website or the retailer where the product was purchased. Please have your model number (OUSQH-0535) and purchase details ready.
