හැඳින්වීම
The Lexar JumpDrive S75 is a high-performance USB 3.1 flash drive designed for efficient storage and transfer of photos, videos, and files. It offers fast read and write speeds, making it suitable for various data management tasks. The drive features a retractable connector for protection and is compatible with both PC and Mac systems.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Lexar JumpDrive S75.
නිෂ්පාදනය අවසන්view
This image shows the Lexar JumpDrive S75 USB 3.1 Flash Drive, highlighting its compact design and retractable connector. The drive is being held in a hand, positioned near a laptop and a notebook, illustrating its portability and ease of use in a typical work or study environment.
The Lexar JumpDrive S75 features a sleek design with a retractable USB connector, which protects the connector when not in use. It is equipped with SuperSpeed USB 3.1 technology for rapid data transfer.
- SuperSpeed USB 3.1 Technology: Enables fast content transfer with speeds up to 150MB/s read and 60MB/s write for 64GB-256GB capacities.
- Retractable Connector: A convenient thumb slide mechanism extends and retracts the USB connector.
- පුළුල් ගැළපුම: Works with both PC and Mac operating systems.
- LED Activity Indicator: A small light indicates when the drive is actively reading or writing data.
සැලසුම
The Lexar JumpDrive S75 is a plug-and-play device, requiring no special driver installation for most modern operating systems.
- සම්බන්ධකය දිගු කරන්න: Use the thumb slide to extend the USB connector from the drive casing.
- පරිගණකයට සම්බන්ධ කරන්න: Insert the USB connector into an available USB port on your computer. For optimal performance, use a USB 3.0 or USB 3.1 port. The drive is also backward compatible with USB 2.0 ports, though speeds will be limited to USB 2.0 specifications.
- පිළිගැනීම: Your computer's operating system should automatically detect the drive and make it accessible. It will typically appear as a removable disk drive in 'My Computer' (Windows) or on the desktop/Finder (Mac).
මෙහෙයුම් උපදෙස්
මාරු කිරීම Files
- Open the Drive: Double-click the drive icon on your computer to open its contents.
- පිටපත් කරන්න Files: ඇදගෙන යන්න files or folders from your computer to the JumpDrive S75, or vice versa. Alternatively, use the copy and paste functions.
- Monitor Transfer: Observe the LED activity indicator on the drive. A flashing light indicates that data is being read from or written to the drive.
ආරක්ෂිත ඉවත් කිරීම
To prevent data corruption, always safely eject the flash drive before physically removing it from your computer.
- වින්ඩෝස්: Click the 'Safely Remove Hardware and Eject Media' icon in the system tray, then select the Lexar JumpDrive S75. Wait for the 'Safe to Remove Hardware' message before unplugging.
- Mac: Drag the drive icon to the Trash, or right-click (Control-click) the drive icon and select 'Eject'. Wait for the icon to disappear before unplugging.
නඩත්තු කිරීම
- සම්බන්ධකය ආරක්ෂා කරන්න: Always retract the USB connector into the drive casing when not in use to prevent damage to the connector pins.
- පරිස්සමින් හැසිරවීම: Avoid dropping the drive or subjecting it to excessive force, as this can cause internal damage.
- වියළිව තබා ගන්න: Protect the drive from moisture and extreme temperatures.
- නිතිපතා උපස්ථ: While flash drives are reliable, it is good practice to back up important data to multiple locations to prevent data loss.
දෝෂගවේෂණය
ධාවකය අනාවරණය නොවීය
- ධාවකය සම්පූර්ණයෙන්ම USB පෝට් එකට ඇතුළු කර ඇති බවට වග බලා ගන්න.
- ඔබේ පරිගණකයේ වෙනත් USB පෝට් එකක් උත්සාහ කරන්න.
- Test the drive on another computer to determine if the issue is with the drive or the computer's USB port.
- ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
මන්දගාමී මාරු වේගයන්
- Verify that you are connected to a USB 3.0 or USB 3.1 port. USB 2.0 ports will operate at significantly lower speeds.
- කුඩා දේවල් රාශියක් මාරු කිරීම files තනි විශාල ගොනුවක් මාරු කිරීමට වඩා මන්දගාමී විය හැක. file එකම සම්පූර්ණ ප්රමාණයෙන්.
- ඔබේ පරිගණකයේ ධාවක යාවත්කාලීනව පවතින බවට වග බලා ගන්න.
Data Corruption or Inaccessible Files
- Always safely eject the drive before removal. Unexpected removal can lead to data corruption.
- If files become inaccessible, you may consider using data recovery software (third-party) or reformatting the drive if data is not critical. Reformatting will erase all data.
Reported Capacity Discrepancy
- The actual usable storage capacity may be less than the stated capacity due to formatting, operating system files, and other functions. This is normal for all storage devices.
පිරිවිතර
| මාදිලියේ නම | S75 |
| අයිතම ආදර්ශ අංකය | LJDS75-256ABNL |
| මතක ගබඩා ධාරිතාව | 256 GB |
| දෘඩාංග අතුරුමුහුණත | USB 3.0 (USB 3.1 සමඟ අනුකූල වේ) |
| කියවීමේ වේගය | 150 MB/s දක්වා |
| ලිවීමේ වේගය | 60 MB/s දක්වා |
| සම්බන්ධතා තාක්ෂණය | USB |
| දෘඪාංග වේදිකාව | PC, Mac |
| මෙහෙයුම් පද්ධතිය | පීසී; මැක් |
| වර්ණය | සුදු |
| අයිතමයේ බර | අවුන්ස 0.768 කි |
| නිෂ්පාදන මානයන් | අඟල් 4 x 0.54 x 5.5 |
| නිෂ්පාදකයා | Lexar International |
වගකීම් තොරතුරු
For detailed warranty information regarding your Lexar JumpDrive S75, please refer to the official Lexar website or the warranty card included with your product at the time of purchase. Warranty terms and conditions may vary by region and product.
සහාය
If you encounter any issues or have questions not covered in this manual, please visit the official Lexar support website for further assistance, FAQs, and contact options.
Lexar Official Webඅඩවිය: www.lexar.com
