1. හැඳින්වීම
Thank you for choosing the Titan 21049 26-inch Wall Cabinet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new wall cabinet. Please read these instructions thoroughly before assembly and retain them for future reference.
2 ආරක්ෂිත තොරතුරු
Always use appropriate safety gear when installing or maintaining the cabinet. Be aware of potential pinch points, especially when using the sliding door. Ensure the cabinet is securely mounted to the wall and not overloaded to prevent accidents.
- ස්ථාපනය අතරතුර අත්වැසුම් සහ අක්ෂි ආරක්ෂාව වැනි සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පළඳින්න.
- Ensure the mounting surface is structurally sound and capable of supporting the cabinet's weight when fully loaded.
- Do not exceed the maximum weight capacity of the cabinet.
- Keep hands clear of the sliding door mechanism to avoid pinching.
- Store heavy items on lower shelves or towards the back of the cabinet to maintain stability.
3. පැකේජ අන්තර්ගතය
එකලස් කිරීම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න.
- Titan 21049 26-inch Wall Cabinet (1 unit)
- Shelves (quantity as specified by model)
- Keys for locking mechanism (2 units)
- Steel Hooks (30 units)
- Mounting Hardware (screws, anchors - specific type may vary)
4. පිහිටුවීම සහ ස්ථාපනය
The Titan 21049 Wall Cabinet is designed for easy wall mounting, often above a 26-inch rolling tool cabinet. Proper installation is crucial for safety and stability.
4.1. Planning the Installation Location
Choose a location with adequate wall support. Consider the cabinet's dimensions and ensure there is enough clearance for the sliding door operation.

This image illustrates the key dimensions of the Titan 21049 Wall Cabinet: 26 inches wide, 28.5 inches high, and 10.5 inches deep. These measurements are crucial for planning installation space.
4.2. සවි කිරීමේ පියවර
- සවි කිරීම් ලකුණු කරන්න: Hold the cabinet against the wall at the desired height and use a pencil to mark the locations for the mounting screws. Ensure the marks are level.
- සරඹ නියමු සිදුරු: Using an appropriate drill bit for your wall type (wood studs, drywall with anchors, concrete), drill pilot holes at the marked locations.
- Install Anchors (if necessary): If mounting into drywall without studs, insert wall anchors into the pilot holes according to their instructions.
- කැබිනට් මණ්ඩලය සුරක්ෂිත කරන්න: Align the cabinet's mounting holes with the drilled holes/anchors. Insert and tighten the mounting screws securely. Do not overtighten.
- පරීක්ෂණ ස්ථායිතාව: Gently pull on the cabinet to ensure it is firmly attached to the wall before loading it with tools.
5. මෙහෙයුම
The Titan 21049 Wall Cabinet offers secure and accessible storage for your tools.

This image displays the Titan 21049 26-inch Wall Cabinet, featuring its black finish, sliding door, and integrated lock with keys. The interior shows the pegged backing for tool organization.
5.1. Sliding Door
The cabinet features a smooth-gliding sliding door for easy access to your stored items. To open, gently slide the door to either side. To close, slide it back until it covers the opening completely.
5.2. අගුලු දැමීමේ යාන්ත්රණය
For security, the cabinet is equipped with a lock. Insert the key into the lock cylinder and turn to secure or unlock the door. Always ensure the door is fully closed before locking.
5.3. Pegged Backing and Hooks
The interior features a pegged backing, allowing you to customize tool organization using the included 30 steel hooks. Arrange the hooks to suit your specific tools and needs.
6. නඩත්තු කිරීම
Regular maintenance will ensure the longevity and optimal performance of your Titan Wall Cabinet.
- පිරිසිදු කිරීම: කැබිනට් මතුපිට මෘදු, d රෙදි කඩකින් පිස දමන්න.amp රෙදි. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
- දොර යාන්ත්රණය: Periodically check the sliding door tracks for debris and clean as needed. A light application of silicone spray can help maintain smooth operation.
- දෘඪාංග සවිකිරීම: Annually inspect all mounting screws and hardware to ensure they remain tight and secure. Retighten if necessary.
- අගුල: If the lock becomes stiff, apply a small amount of graphite lubricant to the keyhole.
7. දෝශ නිරාකරණය
ඔබේ කැබිනට් මණ්ඩලයේ ගැටළු ඇති වුවහොත්, පහත පොදු විසඳුම් වෙත යොමු වන්න:
- ස්ලයිඩින් දොර කූරු: Check the tracks for obstructions or dirt. Clean the tracks and apply a silicone lubricant if needed. Ensure the cabinet is level.
- Lock Not Engaging: Ensure the door is fully closed and aligned with the locking mechanism. Check if the key is fully inserted and turning correctly. Do not force the key.
- කැබිනට් මණ්ඩලය අස්ථාවර බවක් දැනේ: Verify that all mounting hardware is securely tightened. Ensure the wall structure is adequate for the cabinet's weight. Redistribute contents if overloaded or unevenly weighted.
8. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| වෙළඳ නාමය | ටයිටන් |
| මාදිලියේ නම | 21049 |
| නිෂ්පාදන මානයන් | 10.5"D x 28.5"W x 26"H |
| අයිතමයේ බර | පවුම් 24.6ක් |
| වර්ණය | කළු |
| ද්රව්ය | ඇලෝයි වානේ |
| සවිකිරීමේ වර්ගය | වෝල් මවුන්ට් |
| විශේෂ ලක්ෂණය | අගුළු දැමිය හැකි |
| දොර විලාසය | ලිස්සා යාම |
| ඇතුළත් සංරචක | Shelves, 30 Steel Hooks |
| එකලස් කිරීම අවශ්ය වේ | නැත |
9. වගකීම් සහ සහාය
For warranty information or technical support, please contact Titan customer service. Refer to your purchase documentation for specific warranty terms and contact details.
නිෂ්පාදකයා: Star Asia Usa





