1. හැඳින්වීම
Thank you for choosing the BLACK+DECKER PS7525-QS 800W 25cm Pole Saw. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new tool. Please read these instructions carefully before use and keep them for future reference.
This pole saw is designed for pruning and trimming branches in domestic garden environments. It is not intended for professional or commercial use.
2. සාමාන්ය ආරක්ෂණ තොරතුරු
Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, hearing protection, and a hard hat when operating the pole saw. Ensure the work area is clear of bystanders, children, and pets. Do not operate the tool in wet conditions or near power lines. Always disconnect the power supply before performing any maintenance or adjustments.
For detailed safety guidelines, refer to the safety section of the full product manual available on the BLACK+DECKER webඅඩවිය.
3. නිෂ්පාදන අවසන්view
The BLACK+DECKER PS7525-QS is an 800W electric pole saw featuring a 25cm cutting capacity and an adjustable pole for extended reach. Key features include an automatic chain lubrication system and an easy-fill oil tank.
රූපය 1: The BLACK+DECKER PS7525-QS 800W 25cm Pole Saw. This image shows the complete pole saw assembly, highlighting the motor unit, cutting bar, chain, and the adjustable pole.
ප්රධාන ලක්ෂණ:
- කැපුම් ධාරිතාව: Up to 25cm for efficient branch trimming.
- සකස් කළ හැකි ධ්රැවය: Extends up to 2.7m to reach higher branches safely from the ground.
- ස්වයංක්රීය දාම ලිහිසිකරණය: Ensures continuous and efficient cutting performance.
- Easy-Fill Oil Tank: Simplifies the process of refilling chain oil.
- හැරවුම් හිස: Allows for easy access and improved cutting angles in difficult-to-reach areas.
4. සැකසීම සහ එකලස් කිරීම
Before assembly, ensure all components are present and undamaged. Refer to the parts list in your full manual for a complete overview.
4.1 Attaching the Bar and Chain
- Place the chain around the sprocket and guide bar.
- Mount the guide bar and chain onto the motor unit, ensuring the chain is correctly seated in the guide bar groove.
- Secure the cover and tighten the retaining nuts, leaving them slightly loose for chain tension adjustment.
4.2 දාම තෙල් ටැංකිය පිරවීම
The pole saw features an automatic chain lubrication system. It is crucial to fill the oil tank with appropriate chain lubricant before each use.
- තෙල් ටැංකියේ තොප්පිය ගලවන්න.
- Fill the tank with high-quality chain and bar oil, avoiding overfilling.
- තෙල් ටැංකියේ පියන ආරක්ෂිතව ප්රතිස්ථාපනය කරන්න.
4.3 දාම ආතතිය සකස් කිරීම
Proper chain tension is vital for safe and efficient operation. The chain should be snug against the guide bar but still able to be pulled freely by hand.
- With the retaining nuts slightly loose, use the tensioning screw to adjust the chain tension.
- Once the correct tension is achieved, fully tighten the retaining nuts.
5. මෙහෙයුම් උපදෙස්
Always ensure you are wearing appropriate PPE and that the work area is clear before starting the pole saw.
5.1 කණුව දිගු කිරීම
The pole can be adjusted to the desired length for reaching various branch heights. Loosen the locking mechanism, extend the pole to the required length, and securely tighten the locking mechanism.
රූපය 2: Operating the pole saw with the pole extended. This image demonstrates the user holding the pole saw at an extended length to reach higher branches, emphasizing the tool's reach capability.
5.2 ආරම්භ කිරීම සහ නැවැත්වීම
To start the pole saw, press the safety lock-off button and then squeeze the trigger switch. To stop, release the trigger switch.
5.3 කැපුම් ශිල්පීය ක්රම
Always maintain a firm grip on the pole saw with both hands. Position yourself securely and ensure the branch to be cut is stable. Avoid cutting branches thicker than the recommended capacity (25cm).
- මුලින්ම කපා දමන්න: For larger branches, make a small undercut on the underside of the branch to prevent bark stripping.
- ඉහළ කැපුම: Make the main cut from the top, slightly further out from the undercut.
- Final Cut: Remove the stub close to the main trunk or limb.
රූපය 3: User pruning high branches. This image shows a user safely operating the pole saw to trim branches high in a tree, demonstrating the tool's effectiveness for elevated tasks.
රූපය 4: User operating the pole saw from a lower angle. This image provides another perspective of the pole saw in use, highlighting its maneuverability and the user's control during pruning operations.
Always be aware of falling branches and ensure a clear escape path. Do not stand directly under the branch being cut.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and safe operation of your pole saw. Always disconnect the power supply before performing any maintenance.
6.1 දාම ලිහිසි කිරීම
The automatic lubrication system requires regular refilling of the oil tank. Check the oil level before each use and refill as necessary.
6.2 දාම ආතතිය
Check chain tension frequently, especially during initial use. A loose chain can derail, and a too-tight chain can cause excessive wear and damage. Adjust as described in Section 4.3.
6.3 පිරිසිදු කිරීම සහ ගබඩා කිරීම
After each use, clean the pole saw thoroughly. Remove sawdust and debris from the motor unit, guide bar, and chain. Store the tool in a dry, secure location, out of reach of children.
7. දෝශ නිරාකරණය
If you encounter issues with your pole saw, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Saw ආරම්භ නොවේ | No power supply; Safety lock-off not engaged; Faulty switch | Check power connection; Ensure safety lock-off is pressed before trigger; Contact service center |
| දාමය කාර්යක්ෂමව කපා නොගැනීම | අඳුරු දාමය; වැරදි දාම ආතතිය; ප්රමාණවත් ලිහිසිකරණයක් නොමැති වීම. | Sharpen or replace chain; Adjust chain tension; Refill oil tank |
| Chain derails | Loose chain tension; Worn guide bar or chain | Adjust chain tension; Inspect and replace worn parts |
| තෙල් බෙදා හරිනු නොලැබේ | Empty oil tank; Clogged oil port | Refill oil tank; Clean oil port |
ගැටලුව දිගටම පවතින්නේ නම්, BLACK+DECKER පාරිභෝගික සහාය අමතන්න.
8. පිරිවිතර
| පිරිවිතර | විස්තර |
|---|---|
| වෙළඳ නාමය | කළු + තට්ටුව |
| ආකෘතිය | PS7525-QS |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
| බලය | 800W |
| අයිතමයේ බර | කිලෝ ග්රෑම් 3.8 කි |
| නිෂ්පාදන මානයන් | 91.6L x 11.6W x 21.6H සෙ.මී |
| දාමයේ දිග | 25 සෙ.මී |
| GTIN | 05035048554081 |
| නිෂ්පාදකයා | කළු + තට්ටුව |
9. වගකීම් තොරතුරු
BLACK+DECKER products are manufactured to high-quality standards and are guaranteed against manufacturing defects. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase. For detailed warranty information, refer to the warranty card included with your product or visit the official BLACK+DECKER webඅඩවිය.
10. පාරිභෝගික සහාය
For technical assistance, spare parts, or service, please contact your local BLACK+DECKER service center. You can find contact information on the official BLACK+DECKER webවෙබ් අඩවියේ හෝ ඔබේ නිෂ්පාදනය සමඟ සපයා ඇති ලියකියවිලිවල.
Webඅඩවිය: www.blackanddecker.com
