අත්පොත්+

TC Electronic Ditto+

TC Electronic Ditto+ Looper Pedal

පරිශීලක අත්පොත

1. හැඳින්වීම

The TC Electronic Ditto+ Looper Pedal is a compact and powerful looping device designed for musicians. It offers 60 minutes of looping time with unlimited overdubs, dynamic loop length, and 99 loop storage slots. Featuring a high-resolution color display and intuitive 1-knob control, the Ditto+ provides a streamlined looping experience. Its 24-bit uncompressed audio ensures high fidelity, while analog-dry-through preserves your original signal. This manual provides detailed instructions for setting up, operating, and maintaining your Ditto+ Looper Pedal.

2 ප්රධාන ලක්ෂණ

3. සැකසුම් මාර්ගෝපදේශය

3.1 ඉවත් කිරීම සහ පරීක්ෂා කිරීම

Carefully remove the Ditto+ Looper Pedal from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or storage.

3.2 බල සම්බන්ධතාවය

The Ditto+ requires a 9V DC power supply (not included) with a center-negative polarity. Connect the power adapter to the 9V DC input jack on the pedal. Ensure the power supply meets the specifications (9 Volts, 0.1 Amps) to prevent damage.

කෝණික view of TC Electronic Ditto+ Looper Pedal showing input/output jacks and power input

රූපය 1: කෝණික view of the Ditto+ pedal, highlighting the input and output jacks on the sides, and the power input jack. This view helps identify connection points.

3.3 ශ්‍රව්‍ය සම්බන්ධතා

  1. ඔබේ උපකරණය (උදා: ගිටාරය) සම්බන්ධ කරන්න ආදානය සම්මත 1/4-අඟල් උපකරණ කේබලයක් භාවිතයෙන් පැඩලයේ දකුණු පැත්තේ ජැක් එක තද කරන්න.
  2. සම්බන්ධ කරන්න ප්‍රතිදානය පැඩලයේ වම් පැත්තේ ජැක් එක ඔබේ පැත්තට amplifier or other effects pedals using another standard 1/4-inch instrument cable.

3.4 USB සම්බන්ධතාවය

The Ditto+ features a USB port for importing and exporting loops. Connect a standard USB cable from the pedal to your computer for managing your loop library. The USB port is located on the top side of the pedal.

කෝණික view of TC Electronic Ditto+ Looper Pedal showing the USB port

රූපය 2: කෝණික view of the Ditto+ pedal, clearly showing the USB port located on the top edge of the device, used for data transfer.

4. මෙහෙයුම් උපදෙස්

4.1 මූලික ලූප ශ්‍රිත

ඉදිරිපස view of TC Electronic Ditto+ Looper Pedal with display and controls

රූපය 3: ඉදිරිපස view of the Ditto+ pedal, displaying the main screen, the large central knob, the two arrow buttons, and the footswitch. This image illustrates the primary user interface.

4.2 Navigating Loops and Settings

The Ditto+ features a high-resolution color display and a large central knob for navigation and control. The two arrow buttons (< සහ >) allow you to scroll through different loop slots (up to 99) or menu options.

4.3 Extended Looping Mode

The Ditto+ offers an "Extended Looping Mode" which allows you to record a short initial loop and then overdub a longer phrase that automatically extends the overall loop length. This is particularly useful for creating complex arrangements.

  1. Activate Extended Loop Mode: To enable this mode, press and hold both arrow buttons simultaneously. A menu will appear on the display. Navigate to the "Extended Loop Mode" option and select "ON".
  2. Recording in Extended Mode:
    • Record your initial, shorter loop as usual (press footswitch once to start, once to end).
    • Immediately after the initial loop starts playing, press the footswitch once to enter overdub mode.
    • Play your longer overdub. The pedal will use the original loop as a timing reference.
    • To end the extended overdub, tap the footswitch කලින්, before the desired end point. The pedal will then close the loop at the end of the next full bar, based on the original loop's timing. This ensures a musically coherent loop extension.
  3. Subsequent Overdubs: After the extended loop is established, subsequent overdubs will function as normal, adding layers to the new, longer loop.

Note: The extended loop feature typically allows for one primary extension. You cannot infinitely re-adjust the loop length multiple times using this method.

4.4 Import/Export Loops

Connect the Ditto+ to your computer via USB. The pedal will appear as a mass storage device, allowing you to drag and drop audio files (WAV format recommended) to and from its internal memory. This enables you to back up your loops or load pre-recorded tracks.

5. නඩත්තු කිරීම

6. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
No power / Pedal does not turn onIncorrect power supply; loose connection; faulty power adapter.Ensure a 9V DC, center-negative power supply is used. Check all connections. Try a different power adapter if available.
පැඩලයෙන් ශබ්දයක් නැතIncorrect audio connections; instrument volume low; amplifier off; faulty cables.උපකරණය සත්‍යාපනය කරන්න සහ amplifier connections. Check instrument and amplifier volume. Test with different cables.
Loop clears unexpectedlyAccidental double-tap of footswitch.The "clear loop" function is a quick double-tap. Practice precise footswitch presses to avoid accidental clearing.
Difficulty with Extended Looping ModeIncorrect activation or timing.Ensure you press and hold both arrow buttons simultaneously to activate the mode. For ending an extended overdub, tap the footswitch කලින් to allow the pedal to close the loop at the next bar's end.
Loops not savingPower interruption during saving; memory issue.The Ditto+ automatically retains loops. If issues persist, try re-saving or performing a factory reset (refer to official TC Electronic documentation for reset procedures).

7. තාක්ෂණික පිරිවිතර

8. වගකීම් සහ සහාය

For warranty information, technical support, or further assistance with your TC Electronic Ditto+ Looper Pedal, please refer to the official TC Electronic webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සහාය කෙලින්ම අමතන්න. ඔබට පිවිසිය හැකිය Amazon හි TC ඉලෙක්ට්‍රොනික වෙළඳසැල අමතර නිෂ්පාදන තොරතුරු සහ සම්පත් සඳහා.